Thanks for the response. My apologies, it was a typo when I wrote "authorize". I meant "authenticate" in that paragraph. The ntlm_auth entry is already located inside the authentication section of the sites-available/default file. I should have included that file initially, but was a little pressed for space due to the size constraints on the mailing list. I will include it in this response if it will help. Perhaps I am not entering the information correctly. In the file, you can see the 3 different methods I used to try to implement the authentication. I have already tried removing the "Auth-Type" attributes from the entries in my users file, and as far as I can tell, exec was already instantiated in my current configs. So with this suggestion, I am back to "No authenticate method (Auth-Type) configuration found for the request", and the request is rejected. Again, thanks for the assistance. I hope I am just making some sort of simple mistake somewhere in the configs. Respectfully, Charles Jones On Thu, Apr 3, 2008 at 9:07 AM, Ivan Kalik <tnt@kalik.net> wrote:
Next, I decided to try a different Auth-Type. However, anytime I try to provide an alternative Auth-Type, FR refuses to start with "Unknown value for <insert Auth-Type of choice here> for attribute Auth-Type". I have specifically tried to use ntlm_auth because that would be my preferred method of authentication between FR and AD. When I attempted to use ntlm_auth as the Auth-Type, I received the "Unknown Value" message. I also tried adding an entry for it in the sites_available/default file under the "authorize" section to see if that helped. I received the same error. Next, I tried adding it to the "instantiate" section just out of curiosity, and received a new error stating "Cannot find a configuration entry for module ntlm_auth".
Don't set Auth-Type. Add ntlm_auth to authenticate not authorize section. And instantiate exec module.
Ivan Kalik Kalik Informatika ISP
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html