Also, I can add that i checked with sniffter and didn't see that freeradius connects to NAS via snmp. 12 декабря 2011, 13:25 от Толик Шавловский<tolik_shavlovsky@mail.ru>:
Hi,
this is my radwho output for 1st user (last string for 12-12-2011): eradius freebsd# radwho Login Name What TTY When From Location user user shell >999 Thu 14:38 10.169.33.11 user user shell >999 Thu 15:03 10.169.33.11 user user shell >999 Thu 17:25 10.169.33.11 user user shell >999 Thu 17:26 10.169.33.11 user user shell >999 Mon 10:45 10.169.33.11
this is seen from NAS, i cannot add file with prntscrs, but use session is active in NAS.
then, i connect 2nd user via same NAS: freebsd# radwho Login Name What TTY When From Location user user shell >999 Thu 14:38 10.169.33.11 user user shell >999 Thu 15:03 10.169.33.11 user user shell >999 Thu 17:25 10.169.33.11 user user shell >999 Thu 17:26 10.169.33.11 user user shell >999 Mon 10:45 10.169.33.11 user user shell >999 Mon 10:50 10.169.33.11
this is seen from NAS, also. so, first user is recorded.
I also wanted to add configuration files, but it is not allowed by maillist policy.
part of clients.conf: freebsd# cat clients.conf client 10.169.33.11/24 { # require_message_authenticator = no secret = "12345" nastype = "cisco" login = snmp password = public }
freeradius server connects via snmp to NAs, i checked with snmpget.
so, what can be wrong in my configuration?
BR, Anatolii
10 декабря 2011, 05:52 от Alan DeKok <aland@deployingradius.com>:
tolik_shavlovsky@mail.ru wrote:
i am really not experienced with freeradius and mysql. I made everything with your website. I kindly ask you for help.
i made test in the following manner: 1. connect 1st laptop via Ap (NAS) with user/user 2. connect second laptop
simult-use feature should block second one, as i understood.
IF CERTAIN CONDITIONS ARE MET.
from your previuos emailing i understood that acounting is send if we use database, so I configured authentication from mysql.
in the debug i see Accounting-Request packet and Accounting-Response.
can you describe what is not met??
Read doc/Simultaneous-Use, Section 3. It documents what happens for Simultaneous-Use to work.
Go check it against the debug output. Run "radwho" after the first login to see if FreeRADIUS has recorded that the user has logged in.
If that information isn't recorded, Simultaneous-Use won't work. Don't blame FreeRADIUS. Blame the NAS which is sending useless data.
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html