Re: Troubleshooting EAP-TLS with External Certificates

8 Sep 2016

      Alan, Alan, and FR Users,

Thank you for your help and direction while figuring out configuration
of FreeRADIUS.  You've been very helpful.

*** 1st Question: Are there any implications when removing the space
filter from policy.d?

In my attempts to get FreeRADIUS configured to work with e-mail/auth
certificates (previously issued), I was given a new 'CA Cert' to use
with our e-mail certificates.  I am now successfully authenticating
with the new CA file I was given and my e-mail certificate.
Unfortunately, the 'User-Name' field was filled with 'User Name' with
a space and failed the username field check.  I removed the space
filter from /etc/raddb/policy.d and I can now authenticate.  (Output
below).
...
If you use a public CA then anyone else can get a cert signed by that CA for small change, they can then do eg evil twin etc attacks and badly configured clients will auth against them. ..thus giving them the users password (or easily cloud cracked mschap challenge/response)... many clients have basic security...eg only trust the CA. So local CA is the one way to ensure lowest common denominator is secure.
*** 2nd Question: If my company uses an internal CA certificate that
was issued/signed by Verisign and is bundled with the public CA's
chain, are there security implications with using the bundle?  (Output
below)

Thank You,

Matthew West

PS - I have not started removing unwanted modules from /mods-enabled,
will be doing that after confirming the working setup.

---

[root@localhost ~]# radiusd -X
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu,
built on Mar  5 2015 at 23:41:36
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 security {
  max_attributes = 200
  reject_delay = 1
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client bea-corp-sw1 {
  ipaddr = 10.XX.XX.123
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 16384
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  mod_accounting_username_bug = no
  max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ACME_bundle.crt"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_method = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  usersfile = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 36241
Ready to process requests
Received Access-Request Id 252 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 164
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x02010011014d6174746865772057657374
Message-Authenticator = 0xc8d04a388e3773fc85731ac1b373affb
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
NAS-IP-Address = 10.XX.XX.123
(0) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=252, length=164
(0) User-Name = 'Matthew West'
(0) Service-Type = Framed-User
(0) Framed-MTU = 1500
(0) Called-Station-Id = '08-CC-68-D5-1F-1E'
(0) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(0) EAP-Message = 0x02010011014d6174746865772057657374
(0) Message-Authenticator = 0xc8d04a388e3773fc85731ac1b373affb
(0) NAS-Port-Type = Ethernet
(0) NAS-Port = 50130
(0) NAS-Port-Id = 'GigabitEthernet1/0/30'
(0) NAS-IP-Address = 10.XX.XX.123
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (!&User-Name)
(0)     if (!&User-Name)  -> FALSE
(0)     if (&User-Name =~ / /)
(0)     if (&User-Name =~ / /)  -> TRUE
(0)    if (&User-Name =~ / /)  {
(0)     update reply {
(0) Reply-Message += 'Rejected: Username contains whitespace'
(0)     } # update reply = noop
(0)     [reject] = reject
(0)    } # if (&User-Name =~ / /)  = reject
(0)   } # filter_username filter_username = reject
(0)  } #  authorize = reject
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)  Post-Auth-Type REJECT {
(0)  attr_filter.access_reject : EXPAND %{User-Name}
(0)  attr_filter.access_reject :    --> Matthew West
(0)  attr_filter.access_reject : Matched entry DEFAULT at line 11
(0)   [attr_filter.access_reject] = updated
(0)  eap : Request was previously rejected, inserting EAP-Failure
(0)   [eap] = updated
(0)   remove_reply_message_if_eap remove_reply_message_if_eap {
(0)     if (&reply:EAP-Message && &reply:Reply-Message)
(0)     if (&reply:EAP-Message && &reply:Reply-Message)  -> TRUE
(0)    if (&reply:EAP-Message && &reply:Reply-Message)  {
(0)     update reply {
(0) Reply-Message !* ANY
(0)     } # update reply = noop
(0)    } # if (&reply:EAP-Message && &reply:Reply-Message)  = noop
(0)     ... skipping else for request 0: Preceding "if" was taken
(0)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(0)  } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sending Access-Reject packet to host 10.XX.XX.123 port 1645,
id=252, length=0
(0) EAP-Message = 0x04010004
(0) Message-Authenticator = 0x00000000000000000000000000000000
Sending Access-Reject Id 252 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x04010004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 252 with timestamp +452
Ready to process requests
^C
[root@localhost ~]# radiusd -X
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu,
built on Mar  5 2015 at 23:41:36
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/filter.org
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 security {
  max_attributes = 200
  reject_delay = 1
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client bea-corp-sw1 {
  ipaddr = 10.XX.XX.123
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 16384
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  mod_accounting_username_bug = no
  max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ACME_bundle.crt"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_method = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  usersfile = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 40645
Ready to process requests
Received Access-Request Id 253 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 164
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x02010011014d6174746865772057657374
Message-Authenticator = 0xc7fe26226e97047711b491c9d8bd0d26
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
NAS-IP-Address = 10.XX.XX.123
(0) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=253, length=164
(0) User-Name = 'Matthew West'
(0) Service-Type = Framed-User
(0) Framed-MTU = 1500
(0) Called-Station-Id = '08-CC-68-D5-1F-1E'
(0) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(0) EAP-Message = 0x02010011014d6174746865772057657374
(0) Message-Authenticator = 0xc7fe26226e97047711b491c9d8bd0d26
(0) NAS-Port-Type = Ethernet
(0) NAS-Port = 50130
(0) NAS-Port-Id = 'GigabitEthernet1/0/30'
(0) NAS-IP-Address = 10.XX.XX.123
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (!&User-Name)
(0)     if (!&User-Name)  -> FALSE
(0)     if (&User-Name =~ /@.*@/ )
(0)     if (&User-Name =~ /@.*@/ )  -> FALSE
(0)     if (&User-Name =~ /\\.\\./ )
(0)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(0)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(0)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(0)     if (&User-Name =~ /\\.$/)
(0)     if (&User-Name =~ /\\.$/)   -> FALSE
(0)     if (&User-Name =~ /@\\./)
(0)     if (&User-Name =~ /@\\./)   -> FALSE
(0)   } # filter_username filter_username = notfound
(0)   [preprocess] = ok
(0)   [chap] = noop
(0)   [mschap] = noop
(0)   [digest] = noop
(0)  suffix : Checking for suffix after "@"
(0)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(0)  suffix : No such realm "NULL"
(0)   [suffix] = noop
(0)  eap : Peer sent code Response (2) ID 1 length 17
(0)  eap : EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)   [eap] = ok
(0)  } #  authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0)  eap : Peer sent method Identity (1)
(0)  eap : Calling eap_md5 to process EAP data
(0)  eap_md5 : Issuing MD5 Challenge
(0)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf04dad23
(0)   [eap] = handled
(0)  } #  authenticate = handled
(0) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=253, length=0
(0) EAP-Message = 0x0102001604107696cc35fda607f796d9f56764633c0a
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xf04fa9faf04dad23abe4e4c6bbb3ee47
Sending Access-Challenge Id 253 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x0102001604107696cc35fda607f796d9f56764633c0a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf04dad23abe4e4c6bbb3ee47
(0) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 254 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x02020006030d
Message-Authenticator = 0xacd6de673336f50f0d2c8815f239ed86
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf04dad23abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(1) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=254, length=171
(1) User-Name = 'Matthew West'
(1) Service-Type = Framed-User
(1) Framed-MTU = 1500
(1) Called-Station-Id = '08-CC-68-D5-1F-1E'
(1) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(1) EAP-Message = 0x02020006030d
(1) Message-Authenticator = 0xacd6de673336f50f0d2c8815f239ed86
(1) NAS-Port-Type = Ethernet
(1) NAS-Port = 50130
(1) NAS-Port-Id = 'GigabitEthernet1/0/30'
(1) State = 0xf04fa9faf04dad23abe4e4c6bbb3ee47
(1) NAS-IP-Address = 10.XX.XX.123
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)   filter_username filter_username {
(1)     if (!&User-Name)
(1)     if (!&User-Name)  -> FALSE
(1)     if (&User-Name =~ /@.*@/ )
(1)     if (&User-Name =~ /@.*@/ )  -> FALSE
(1)     if (&User-Name =~ /\\.\\./ )
(1)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(1)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(1)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(1)     if (&User-Name =~ /\\.$/)
(1)     if (&User-Name =~ /\\.$/)   -> FALSE
(1)     if (&User-Name =~ /@\\./)
(1)     if (&User-Name =~ /@\\./)   -> FALSE
(1)   } # filter_username filter_username = notfound
(1)   [preprocess] = ok
(1)   [chap] = noop
(1)   [mschap] = noop
(1)   [digest] = noop
(1)  suffix : Checking for suffix after "@"
(1)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(1)  suffix : No such realm "NULL"
(1)   [suffix] = noop
(1)  eap : Peer sent code Response (2) ID 2 length 6
(1)  eap : No EAP Start, assuming it's an on-going EAP conversation
(1)   [eap] = updated
(1)   [files] = noop
(1)   [expiration] = noop
(1)   [logintime] = noop
(1)  WARNING: pap : No "known good" password found for the user.  Not
setting Auth-Type
(1)  WARNING: pap : Authentication will fail unless a "known good"
password is available
(1)   [pap] = noop
(1)  } #  authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1)  eap : Expiring EAP session with state 0xf04fa9faf04dad23
(1)  eap : Finished EAP session with state 0xf04fa9faf04dad23
(1)  eap : Previous EAP request found for state 0xf04fa9faf04dad23,
released from the list
(1)  eap : Peer sent method NAK (3)
(1)  eap : Found mutually acceptable type TLS (13)
(1)  eap : Calling eap_tls to process EAP data
(1)  eap_tls : Flushing SSL sessions (of #0)
(1)  eap_tls : Requiring client certificate
(1)  eap_tls : Initiate
(1)  eap_tls : Requiring client certificate
(1)  eap_tls : Start returned 1
(1)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf14ca423
(1)   [eap] = handled
(1)  } #  authenticate = handled
(1) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=254, length=0
(1) EAP-Message = 0x010300060d20
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xf04fa9faf14ca423abe4e4c6bbb3ee47
Sending Access-Challenge Id 254 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010300060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf14ca423abe4e4c6bbb3ee47
(1) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 255 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 296
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020300830d8000000079160301007401000070030157d1d43ecd441f115e1ec3d0d32af15b2732f7a02aa95c91b6a650966deab46b00002800ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000ac007c011000500040100001f000a00080006001700180019000b0002010000050005010000000000120000
Message-Authenticator = 0x17619e18afe17fe418be4de2dc0e6b6c
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf14ca423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(2) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=255, length=296
(2) User-Name = 'Matthew West'
(2) Service-Type = Framed-User
(2) Framed-MTU = 1500
(2) Called-Station-Id = '08-CC-68-D5-1F-1E'
(2) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(2) EAP-Message =
0x020300830d8000000079160301007401000070030157d1d43ecd441f115e1ec3d0d32af15b2732f7a02aa95c91b6a650966deab46b00002800ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000ac007c011000500040100001f000a00080006001700180019000b0002010000050005010000000000120000
(2) Message-Authenticator = 0x17619e18afe17fe418be4de2dc0e6b6c
(2) NAS-Port-Type = Ethernet
(2) NAS-Port = 50130
(2) NAS-Port-Id = 'GigabitEthernet1/0/30'
(2) State = 0xf04fa9faf14ca423abe4e4c6bbb3ee47
(2) NAS-IP-Address = 10.XX.XX.123
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)   filter_username filter_username {
(2)     if (!&User-Name)
(2)     if (!&User-Name)  -> FALSE
(2)     if (&User-Name =~ /@.*@/ )
(2)     if (&User-Name =~ /@.*@/ )  -> FALSE
(2)     if (&User-Name =~ /\\.\\./ )
(2)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(2)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(2)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(2)     if (&User-Name =~ /\\.$/)
(2)     if (&User-Name =~ /\\.$/)   -> FALSE
(2)     if (&User-Name =~ /@\\./)
(2)     if (&User-Name =~ /@\\./)   -> FALSE
(2)   } # filter_username filter_username = notfound
(2)   [preprocess] = ok
(2)   [chap] = noop
(2)   [mschap] = noop
(2)   [digest] = noop
(2)  suffix : Checking for suffix after "@"
(2)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(2)  suffix : No such realm "NULL"
(2)   [suffix] = noop
(2)  eap : Peer sent code Response (2) ID 3 length 131
(2)  eap : No EAP Start, assuming it's an on-going EAP conversation
(2)   [eap] = updated
(2)   [files] = noop
(2)   [expiration] = noop
(2)   [logintime] = noop
(2)   [pap] = noop
(2)  } #  authorize = updated
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2)  eap : Expiring EAP session with state 0xf04fa9faf14ca423
(2)  eap : Finished EAP session with state 0xf04fa9faf14ca423
(2)  eap : Previous EAP request found for state 0xf04fa9faf14ca423,
released from the list
(2)  eap : Peer sent method TLS (13)
(2)  eap : EAP TLS (13)
(2)  eap : Calling eap_tls to process EAP data
(2)  eap_tls : Authenticate
(2)  eap_tls : processing EAP-TLS
  TLS Length 121
(2)  eap_tls : Length Included
(2)  eap_tls : eaptls_verify returned 11
(2)  eap_tls : (other): before/accept initialization
(2)  eap_tls : TLS_accept: before/accept initialization
(2)  eap_tls : <<< TLS 1.0 Handshake [length 0074], ClientHello
(2)  eap_tls : TLS_accept: SSLv3 read client hello A
(2)  eap_tls : >>> TLS 1.0 Handshake [length 0059], ServerHello
(2)  eap_tls : TLS_accept: SSLv3 write server hello A
(2)  eap_tls : >>> TLS 1.0 Handshake [length 0402], Certificate
(2)  eap_tls : TLS_accept: SSLv3 write certificate A
(2)  eap_tls : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2)  eap_tls : TLS_accept: SSLv3 write key exchange A
(2)  eap_tls : >>> TLS 1.0 Handshake [length 0271], CertificateRequest
(2)  eap_tls : TLS_accept: SSLv3 write certificate request A
(2)  eap_tls : TLS_accept: SSLv3 flush data
(2)  eap_tls : TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(2)  eap_tls : eaptls_process returned 13
(2)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf24ba423
(2)   [eap] = handled
(2)  } #  authenticate = handled
(2) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=255, length=0
(2) EAP-Message =
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
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xf04fa9faf24ba423abe4e4c6bbb3ee47
Sending Access-Challenge Id 255 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf24ba423abe4e4c6bbb3ee47
(2) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 0 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020400060d00
Message-Authenticator = 0x16b86af565c700bc0d41743b8488b786
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf24ba423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(3) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=0, length=171
(3) User-Name = 'Matthew West'
(3) Service-Type = Framed-User
(3) Framed-MTU = 1500
(3) Called-Station-Id = '08-CC-68-D5-1F-1E'
(3) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(3) EAP-Message = 0x020400060d00
(3) Message-Authenticator = 0x16b86af565c700bc0d41743b8488b786
(3) NAS-Port-Type = Ethernet
(3) NAS-Port = 50130
(3) NAS-Port-Id = 'GigabitEthernet1/0/30'
(3) State = 0xf04fa9faf24ba423abe4e4c6bbb3ee47
(3) NAS-IP-Address = 10.XX.XX.123
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)   filter_username filter_username {
(3)     if (!&User-Name)
(3)     if (!&User-Name)  -> FALSE
(3)     if (&User-Name =~ /@.*@/ )
(3)     if (&User-Name =~ /@.*@/ )  -> FALSE
(3)     if (&User-Name =~ /\\.\\./ )
(3)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(3)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(3)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(3)     if (&User-Name =~ /\\.$/)
(3)     if (&User-Name =~ /\\.$/)   -> FALSE
(3)     if (&User-Name =~ /@\\./)
(3)     if (&User-Name =~ /@\\./)   -> FALSE
(3)   } # filter_username filter_username = notfound
(3)   [preprocess] = ok
(3)   [chap] = noop
(3)   [mschap] = noop
(3)   [digest] = noop
(3)  suffix : Checking for suffix after "@"
(3)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(3)  suffix : No such realm "NULL"
(3)   [suffix] = noop
(3)  eap : Peer sent code Response (2) ID 4 length 6
(3)  eap : No EAP Start, assuming it's an on-going EAP conversation
(3)   [eap] = updated
(3)   [files] = noop
(3)   [expiration] = noop
(3)   [logintime] = noop
(3)   [pap] = noop
(3)  } #  authorize = updated
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3)  eap : Expiring EAP session with state 0xf04fa9faf24ba423
(3)  eap : Finished EAP session with state 0xf04fa9faf24ba423
(3)  eap : Previous EAP request found for state 0xf04fa9faf24ba423,
released from the list
(3)  eap : Peer sent method TLS (13)
(3)  eap : EAP TLS (13)
(3)  eap : Calling eap_tls to process EAP data
(3)  eap_tls : Authenticate
(3)  eap_tls : processing EAP-TLS
(3)  eap_tls : Received TLS ACK
(3)  eap_tls : Received TLS ACK
(3)  eap_tls : ACK handshake fragment handler
(3)  eap_tls : eaptls_verify returned 1
(3)  eap_tls : eaptls_process returned 13
(3)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf34aa423
(3)   [eap] = handled
(3)  } #  authenticate = handled
(3) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=0, length=0
(3) EAP-Message =
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
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xf04fa9faf34aa423abe4e4c6bbb3ee47
Sending Access-Challenge Id 0 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf34aa423abe4e4c6bbb3ee47
(3) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 1 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020500060d00
Message-Authenticator = 0x133f34dea4e06a2142cd418cecc88484
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf34aa423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(4) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=1, length=171
(4) User-Name = 'Matthew West'
(4) Service-Type = Framed-User
(4) Framed-MTU = 1500
(4) Called-Station-Id = '08-CC-68-D5-1F-1E'
(4) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(4) EAP-Message = 0x020500060d00
(4) Message-Authenticator = 0x133f34dea4e06a2142cd418cecc88484
(4) NAS-Port-Type = Ethernet
(4) NAS-Port = 50130
(4) NAS-Port-Id = 'GigabitEthernet1/0/30'
(4) State = 0xf04fa9faf34aa423abe4e4c6bbb3ee47
(4) NAS-IP-Address = 10.XX.XX.123
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)   filter_username filter_username {
(4)     if (!&User-Name)
(4)     if (!&User-Name)  -> FALSE
(4)     if (&User-Name =~ /@.*@/ )
(4)     if (&User-Name =~ /@.*@/ )  -> FALSE
(4)     if (&User-Name =~ /\\.\\./ )
(4)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(4)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(4)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(4)     if (&User-Name =~ /\\.$/)
(4)     if (&User-Name =~ /\\.$/)   -> FALSE
(4)     if (&User-Name =~ /@\\./)
(4)     if (&User-Name =~ /@\\./)   -> FALSE
(4)   } # filter_username filter_username = notfound
(4)   [preprocess] = ok
(4)   [chap] = noop
(4)   [mschap] = noop
(4)   [digest] = noop
(4)  suffix : Checking for suffix after "@"
(4)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(4)  suffix : No such realm "NULL"
(4)   [suffix] = noop
(4)  eap : Peer sent code Response (2) ID 5 length 6
(4)  eap : No EAP Start, assuming it's an on-going EAP conversation
(4)   [eap] = updated
(4)   [files] = noop
(4)   [expiration] = noop
(4)   [logintime] = noop
(4)   [pap] = noop
(4)  } #  authorize = updated
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4)  eap : Expiring EAP session with state 0xf04fa9faf34aa423
(4)  eap : Finished EAP session with state 0xf04fa9faf34aa423
(4)  eap : Previous EAP request found for state 0xf04fa9faf34aa423,
released from the list
(4)  eap : Peer sent method TLS (13)
(4)  eap : EAP TLS (13)
(4)  eap : Calling eap_tls to process EAP data
(4)  eap_tls : Authenticate
(4)  eap_tls : processing EAP-TLS
(4)  eap_tls : Received TLS ACK
(4)  eap_tls : Received TLS ACK
(4)  eap_tls : ACK handshake fragment handler
(4)  eap_tls : eaptls_verify returned 1
(4)  eap_tls : eaptls_process returned 13
(4)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf449a423
(4)   [eap] = handled
(4)  } #  authenticate = handled
(4) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=1, length=0
(4) EAP-Message =
0x010600710d800000082b6563686e6f6c6f676965732c204c4c43204341004e304c3120301e060355040a13175961616e6120546563686e6f6c6f676965732c204c4c43312830260603550403131f5961616e6120546563686e6f6c6f676965732c204c4c43204341202d2047320e000000
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xf04fa9faf449a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 1 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010600710d800000082b6563686e6f6c6f676965732c204c4c43204341004e304c3120301e060355040a13175961616e6120546563686e6f6c6f676965732c204c4c43312830260603550403131f5961616e6120546563686e6f6c6f676965732c204c4c43204341202d2047320e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf449a423abe4e4c6bbb3ee47
(4) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 2 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 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
Message-Authenticator = 0x94f42e70e2a693a04a98916fa170e48c
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf449a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(5) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=2, length=1451
(5) User-Name = 'Matthew West'
(5) Service-Type = Framed-User
(5) Framed-MTU = 1500
(5) Called-Station-Id = '08-CC-68-D5-1F-1E'
(5) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(5) EAP-Message =
0x020604fc0dc00000139016030111fa0b0011f60011f3000769308207653082064da0030201020210181ddca644a326886c48039b989b0ef3300d06092a864886f70d01010505003081c9310b3009060355040613025553311d301b060355040a131453796d616e74656320436f72706f726174696f6e311f301d060355040b131653796d616e746563205472757374204e6574776f726b31353033060355040b132c436c6173732032204d616e6167656420504b4920496e646976696475616c2053756273637269626572204341314330410603550403133a53796d616e74656320436c61737320322053686172656420496e7465726d65646961746520436572746966696361746520417574686f72697479301e170d3136303230323030303030305a170d3138303230313233353935395a30753115301306035504030c0c4d6174746865772057657374310f300d060355040b0c06532f4d494d453120301e060355040a0c175961616e6120546563686e6f6c6f676965732c204c4c433129302706092a864886f70d010901161a6d6174746865772e77657374407961616e61746563682e636f6d30820122300d06092a864886f70d01010105000382010f003082010a0282010100d029e7e78636ab2bb56a797b548157f0b285462820c2c4e9e40e0d01bd6c9e94bdada6d32526d452f3511c62
(5) Message-Authenticator = 0x94f42e70e2a693a04a98916fa170e48c
(5) NAS-Port-Type = Ethernet
(5) NAS-Port = 50130
(5) NAS-Port-Id = 'GigabitEthernet1/0/30'
(5) State = 0xf04fa9faf449a423abe4e4c6bbb3ee47
(5) NAS-IP-Address = 10.XX.XX.123
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)   filter_username filter_username {
(5)     if (!&User-Name)
(5)     if (!&User-Name)  -> FALSE
(5)     if (&User-Name =~ /@.*@/ )
(5)     if (&User-Name =~ /@.*@/ )  -> FALSE
(5)     if (&User-Name =~ /\\.\\./ )
(5)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(5)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(5)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(5)     if (&User-Name =~ /\\.$/)
(5)     if (&User-Name =~ /\\.$/)   -> FALSE
(5)     if (&User-Name =~ /@\\./)
(5)     if (&User-Name =~ /@\\./)   -> FALSE
(5)   } # filter_username filter_username = notfound
(5)   [preprocess] = ok
(5)   [chap] = noop
(5)   [mschap] = noop
(5)   [digest] = noop
(5)  suffix : Checking for suffix after "@"
(5)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(5)  suffix : No such realm "NULL"
(5)   [suffix] = noop
(5)  eap : Peer sent code Response (2) ID 6 length 1276
(5)  eap : No EAP Start, assuming it's an on-going EAP conversation
(5)   [eap] = updated
(5)   [files] = noop
(5)   [expiration] = noop
(5)   [logintime] = noop
(5)   [pap] = noop
(5)  } #  authorize = updated
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5)  eap : Expiring EAP session with state 0xf04fa9faf449a423
(5)  eap : Finished EAP session with state 0xf04fa9faf449a423
(5)  eap : Previous EAP request found for state 0xf04fa9faf449a423,
released from the list
(5)  eap : Peer sent method TLS (13)
(5)  eap : EAP TLS (13)
(5)  eap : Calling eap_tls to process EAP data
(5)  eap_tls : Authenticate
(5)  eap_tls : processing EAP-TLS
  TLS Length 5008
(5)  eap_tls : Received EAP-TLS First Fragment of the message
(5)  eap_tls : eaptls_verify returned 9
(5)  eap_tls : eaptls_process returned 13
(5)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf548a423
(5)   [eap] = handled
(5)  } #  authenticate = handled
(5) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=2, length=0
(5) EAP-Message = 0x010700060d00
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xf04fa9faf548a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 2 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010700060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf548a423abe4e4c6bbb3ee47
(5) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 3 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020704fc0d405630543052a050a04e864c687474703a2f2f706b692d63726c2e73796d617574682e636f6d2f63615f30376262376436343737636634663662653936616631623336636162643331362f4c617465737443524c2e63726c306c0603551d20046530633061060b6086480186f845010717023052302606082b06010505070201161a687474703a2f2f7777772e73796d617574682e636f6d2f637073302806082b06010505070202301c1a1a687474703a2f2f7777772e73796d617574682e636f6d2f727061304206092a864886f70d01090f04353033300a06082a864886f70d0307300b0609608648016503040102300b0609608648016503040116300b060960864801650304012a302c060a6086480186f845011003041e301c06126086480186f84501100102020101869ba76e16063138373230393039060a6086480186f845011005042b302902010016246148523063484d364c79397761326b74636d457563336c74595856306143356a6232303d300d06092a864886f70d010105050003820101005cd4d282900ef55d349cabf167608c0e5fcc699e6e23a7e443642d394b5f7c96416df805734d9064f5b538c1515929b6291d796a5f2b7ecec9a702e047fff88f81692c0b9c2553dcae9bed8fc234f3300fe129e79589b3c5779e88412082d68c765420ba86733fa2dcceb
Message-Authenticator = 0x953d6feb75b9e9aa0de007ccf402c872
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf548a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(6) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=3, length=1451
(6) User-Name = 'Matthew West'
(6) Service-Type = Framed-User
(6) Framed-MTU = 1500
(6) Called-Station-Id = '08-CC-68-D5-1F-1E'
(6) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(6) EAP-Message =
0x020704fc0d405630543052a050a04e864c687474703a2f2f706b692d63726c2e73796d617574682e636f6d2f63615f30376262376436343737636634663662653936616631623336636162643331362f4c617465737443524c2e63726c306c0603551d20046530633061060b6086480186f845010717023052302606082b06010505070201161a687474703a2f2f7777772e73796d617574682e636f6d2f637073302806082b06010505070202301c1a1a687474703a2f2f7777772e73796d617574682e636f6d2f727061304206092a864886f70d01090f04353033300a06082a864886f70d0307300b0609608648016503040102300b0609608648016503040116300b060960864801650304012a302c060a6086480186f845011003041e301c06126086480186f84501100102020101869ba76e16063138373230393039060a6086480186f845011005042b302902010016246148523063484d364c79397761326b74636d457563336c74595856306143356a6232303d300d06092a864886f70d010105050003820101005cd4d282900ef55d349cabf167608c0e5fcc699e6e23a7e443642d394b5f7c96416df805734d9064f5b538c1515929b6291d796a5f2b7ecec9a702e047fff88f81692c0b9c2553dcae9bed8fc234f3300fe129e79589b3c5779e88412082d68c765420ba86733fa2dccebd
(6) Message-Authenticator = 0x953d6feb75b9e9aa0de007ccf402c872
(6) NAS-Port-Type = Ethernet
(6) NAS-Port = 50130
(6) NAS-Port-Id = 'GigabitEthernet1/0/30'
(6) State = 0xf04fa9faf548a423abe4e4c6bbb3ee47
(6) NAS-IP-Address = 10.XX.XX.123
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)   filter_username filter_username {
(6)     if (!&User-Name)
(6)     if (!&User-Name)  -> FALSE
(6)     if (&User-Name =~ /@.*@/ )
(6)     if (&User-Name =~ /@.*@/ )  -> FALSE
(6)     if (&User-Name =~ /\\.\\./ )
(6)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(6)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(6)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(6)     if (&User-Name =~ /\\.$/)
(6)     if (&User-Name =~ /\\.$/)   -> FALSE
(6)     if (&User-Name =~ /@\\./)
(6)     if (&User-Name =~ /@\\./)   -> FALSE
(6)   } # filter_username filter_username = notfound
(6)   [preprocess] = ok
(6)   [chap] = noop
(6)   [mschap] = noop
(6)   [digest] = noop
(6)  suffix : Checking for suffix after "@"
(6)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(6)  suffix : No such realm "NULL"
(6)   [suffix] = noop
(6)  eap : Peer sent code Response (2) ID 7 length 1276
(6)  eap : No EAP Start, assuming it's an on-going EAP conversation
(6)   [eap] = updated
(6)   [files] = noop
(6)   [expiration] = noop
(6)   [logintime] = noop
(6)   [pap] = noop
(6)  } #  authorize = updated
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6)  eap : Expiring EAP session with state 0xf04fa9faf548a423
(6)  eap : Finished EAP session with state 0xf04fa9faf548a423
(6)  eap : Previous EAP request found for state 0xf04fa9faf548a423,
released from the list
(6)  eap : Peer sent method TLS (13)
(6)  eap : EAP TLS (13)
(6)  eap : Calling eap_tls to process EAP data
(6)  eap_tls : Authenticate
(6)  eap_tls : processing EAP-TLS
(6)  eap_tls : More fragments to follow
(6)  eap_tls : eaptls_verify returned 10
(6)  eap_tls : eaptls_process returned 13
(6)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf647a423
(6)   [eap] = handled
(6)  } #  authenticate = handled
(6) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=3, length=0
(6) EAP-Message = 0x010800060d00
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xf04fa9faf647a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 3 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010800060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf647a423abe4e4c6bbb3ee47
(6) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 4 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 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
Message-Authenticator = 0xc1c5b9d576679e82e9b9d17928f09712
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf647a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(7) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=4, length=1451
(7) User-Name = 'Matthew West'
(7) Service-Type = Framed-User
(7) Framed-MTU = 1500
(7) Called-Station-Id = '08-CC-68-D5-1F-1E'
(7) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(7) EAP-Message =
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
(7) Message-Authenticator = 0xc1c5b9d576679e82e9b9d17928f09712
(7) NAS-Port-Type = Ethernet
(7) NAS-Port = 50130
(7) NAS-Port-Id = 'GigabitEthernet1/0/30'
(7) State = 0xf04fa9faf647a423abe4e4c6bbb3ee47
(7) NAS-IP-Address = 10.XX.XX.123
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7)   authorize {
(7)   filter_username filter_username {
(7)     if (!&User-Name)
(7)     if (!&User-Name)  -> FALSE
(7)     if (&User-Name =~ /@.*@/ )
(7)     if (&User-Name =~ /@.*@/ )  -> FALSE
(7)     if (&User-Name =~ /\\.\\./ )
(7)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(7)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(7)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(7)     if (&User-Name =~ /\\.$/)
(7)     if (&User-Name =~ /\\.$/)   -> FALSE
(7)     if (&User-Name =~ /@\\./)
(7)     if (&User-Name =~ /@\\./)   -> FALSE
(7)   } # filter_username filter_username = notfound
(7)   [preprocess] = ok
(7)   [chap] = noop
(7)   [mschap] = noop
(7)   [digest] = noop
(7)  suffix : Checking for suffix after "@"
(7)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(7)  suffix : No such realm "NULL"
(7)   [suffix] = noop
(7)  eap : Peer sent code Response (2) ID 8 length 1276
(7)  eap : No EAP Start, assuming it's an on-going EAP conversation
(7)   [eap] = updated
(7)   [files] = noop
(7)   [expiration] = noop
(7)   [logintime] = noop
(7)   [pap] = noop
(7)  } #  authorize = updated
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   authenticate {
(7)  eap : Expiring EAP session with state 0xf04fa9faf647a423
(7)  eap : Finished EAP session with state 0xf04fa9faf647a423
(7)  eap : Previous EAP request found for state 0xf04fa9faf647a423,
released from the list
(7)  eap : Peer sent method TLS (13)
(7)  eap : EAP TLS (13)
(7)  eap : Calling eap_tls to process EAP data
(7)  eap_tls : Authenticate
(7)  eap_tls : processing EAP-TLS
(7)  eap_tls : More fragments to follow
(7)  eap_tls : eaptls_verify returned 10
(7)  eap_tls : eaptls_process returned 13
(7)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf746a423
(7)   [eap] = handled
(7)  } #  authenticate = handled
(7) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=4, length=0
(7) EAP-Message = 0x010900060d00
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xf04fa9faf746a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 4 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010900060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf746a423abe4e4c6bbb3ee47
(7) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 5 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 1381
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 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
Message-Authenticator = 0xb5bed396e8075f3e329a22154cbf2c28
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf746a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(8) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=5, length=1381
(8) User-Name = 'Matthew West'
(8) Service-Type = Framed-User
(8) Framed-MTU = 1500
(8) Called-Station-Id = '08-CC-68-D5-1F-1E'
(8) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(8) EAP-Message =
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
(8) Message-Authenticator = 0xb5bed396e8075f3e329a22154cbf2c28
(8) NAS-Port-Type = Ethernet
(8) NAS-Port = 50130
(8) NAS-Port-Id = 'GigabitEthernet1/0/30'
(8) State = 0xf04fa9faf746a423abe4e4c6bbb3ee47
(8) NAS-IP-Address = 10.XX.XX.123
(8) # Executing section authorize from file /etc/raddb/sites-enabled/default
(8)   authorize {
(8)   filter_username filter_username {
(8)     if (!&User-Name)
(8)     if (!&User-Name)  -> FALSE
(8)     if (&User-Name =~ /@.*@/ )
(8)     if (&User-Name =~ /@.*@/ )  -> FALSE
(8)     if (&User-Name =~ /\\.\\./ )
(8)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(8)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(8)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(8)     if (&User-Name =~ /\\.$/)
(8)     if (&User-Name =~ /\\.$/)   -> FALSE
(8)     if (&User-Name =~ /@\\./)
(8)     if (&User-Name =~ /@\\./)   -> FALSE
(8)   } # filter_username filter_username = notfound
(8)   [preprocess] = ok
(8)   [chap] = noop
(8)   [mschap] = noop
(8)   [digest] = noop
(8)  suffix : Checking for suffix after "@"
(8)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(8)  suffix : No such realm "NULL"
(8)   [suffix] = noop
(8)  eap : Peer sent code Response (2) ID 9 length 1208
(8)  eap : No EAP Start, assuming it's an on-going EAP conversation
(8)   [eap] = updated
(8)   [files] = noop
(8)   [expiration] = noop
(8)   [logintime] = noop
(8)   [pap] = noop
(8)  } #  authorize = updated
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8)   authenticate {
(8)  eap : Expiring EAP session with state 0xf04fa9faf746a423
(8)  eap : Finished EAP session with state 0xf04fa9faf746a423
(8)  eap : Previous EAP request found for state 0xf04fa9faf746a423,
released from the list
(8)  eap : Peer sent method TLS (13)
(8)  eap : EAP TLS (13)
(8)  eap : Calling eap_tls to process EAP data
(8)  eap_tls : Authenticate
(8)  eap_tls : processing EAP-TLS
(8)  eap_tls : eaptls_verify returned 7
(8)  eap_tls : Done initial handshake
(8)  eap_tls : <<< TLS 1.0 Handshake [length 11fa], Certificate
(8)  eap_tls : chain-depth=2,
(8)  eap_tls : error=0
(8)  eap_tls : --> User-Name = Matthew West
(8)  eap_tls : --> BUF-Name = VeriSign Class 2 Public Primary
Certification Authority - G3
(8)  eap_tls : --> subject = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8)  eap_tls : --> issuer  = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8)  eap_tls : --> verify return:1
(8)  eap_tls : chain-depth=1,
(8)  eap_tls : error=0
(8)  eap_tls : --> User-Name = Matthew West
(8)  eap_tls : --> BUF-Name = Symantec Class 2 Shared Intermediate
Certificate Authority
(8)  eap_tls : --> subject = /C=US/O=Symantec Corporation/OU=Symantec
Trust Network/OU=Class 2 Managed PKI Individual Subscriber
CA/CN=Symantec Class 2 Shared Intermediate Certificate Authority
(8)  eap_tls : --> issuer  = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8)  eap_tls : --> verify return:1
(8)  eap_tls : chain-depth=0,
(8)  eap_tls : error=0
(8)  eap_tls : --> User-Name = Matthew West
(8)  eap_tls : --> BUF-Name = Matthew West
(8)  eap_tls : --> subject = /CN=Matthew West/OU=S/MIME/O=ACME
Technologies, LLC/emailAddress=matthew.west@ACMEtech.com
(8)  eap_tls : --> issuer  = /C=US/O=Symantec Corporation/OU=Symantec
Trust Network/OU=Class 2 Managed PKI Individual Subscriber
CA/CN=Symantec Class 2 Shared Intermediate Certificate Authority
(8)  eap_tls : --> verify return:1
(8)  eap_tls : TLS_accept: SSLv3 read client certificate A
(8)  eap_tls : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(8)  eap_tls : TLS_accept: SSLv3 read client key exchange A
(8)  eap_tls : <<< TLS 1.0 Handshake [length 0106], CertificateVerify
(8)  eap_tls : TLS_accept: SSLv3 read certificate verify A
(8)  eap_tls : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(8)  eap_tls : <<< TLS 1.0 Handshake [length 0010], Finished
(8)  eap_tls : TLS_accept: SSLv3 read finished A
(8)  eap_tls : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(8)  eap_tls : TLS_accept: SSLv3 write change cipher spec A
(8)  eap_tls : >>> TLS 1.0 Handshake [length 0010], Finished
(8)  eap_tls : TLS_accept: SSLv3 write finished A
(8)  eap_tls : TLS_accept: SSLv3 flush data
  SSL: adding session
f334a0969557e364415cbfb4ba2bd54f418d1da5490524c1d394b8b9317942b4 to
cache
(8)  eap_tls : (other): SSL negotiation finished successfully
SSL Connection Established
(8)  eap_tls : eaptls_process returned 13
(8)  eap : New EAP session, adding 'State' attribute to reply 0xf04fa9faf845a423
(8)   [eap] = handled
(8)  } #  authenticate = handled
(8) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=5, length=0
(8) EAP-Message =
0x010a00450d800000003b1403010001011603010030972b5880fa61a3a04063157ce9904c92c768a459de9a5c78d88c35317fef6da0ac3fb8387b9cf365713237487d6b08c9
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0xf04fa9faf845a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 5 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010a00450d800000003b1403010001011603010030972b5880fa61a3a04063157ce9904c92c768a459de9a5c78d88c35317fef6da0ac3fb8387b9cf365713237487d6b08c9
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf845a423abe4e4c6bbb3ee47
(8) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 6 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020a00060d00
Message-Authenticator = 0x850755b28e3e4d3e4817c69f85326117
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf845a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(9) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=6, length=171
(9) User-Name = 'Matthew West'
(9) Service-Type = Framed-User
(9) Framed-MTU = 1500
(9) Called-Station-Id = '08-CC-68-D5-1F-1E'
(9) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(9) EAP-Message = 0x020a00060d00
(9) Message-Authenticator = 0x850755b28e3e4d3e4817c69f85326117
(9) NAS-Port-Type = Ethernet
(9) NAS-Port = 50130
(9) NAS-Port-Id = 'GigabitEthernet1/0/30'
(9) State = 0xf04fa9faf845a423abe4e4c6bbb3ee47
(9) NAS-IP-Address = 10.XX.XX.123
(9) # Executing section authorize from file /etc/raddb/sites-enabled/default
(9)   authorize {
(9)   filter_username filter_username {
(9)     if (!&User-Name)
(9)     if (!&User-Name)  -> FALSE
(9)     if (&User-Name =~ /@.*@/ )
(9)     if (&User-Name =~ /@.*@/ )  -> FALSE
(9)     if (&User-Name =~ /\\.\\./ )
(9)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(9)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(9)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(9)     if (&User-Name =~ /\\.$/)
(9)     if (&User-Name =~ /\\.$/)   -> FALSE
(9)     if (&User-Name =~ /@\\./)
(9)     if (&User-Name =~ /@\\./)   -> FALSE
(9)   } # filter_username filter_username = notfound
(9)   [preprocess] = ok
(9)   [chap] = noop
(9)   [mschap] = noop
(9)   [digest] = noop
(9)  suffix : Checking for suffix after "@"
(9)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(9)  suffix : No such realm "NULL"
(9)   [suffix] = noop
(9)  eap : Peer sent code Response (2) ID 10 length 6
(9)  eap : No EAP Start, assuming it's an on-going EAP conversation
(9)   [eap] = updated
(9)   [files] = noop
(9)   [expiration] = noop
(9)   [logintime] = noop
(9)   [pap] = noop
(9)  } #  authorize = updated
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9)   authenticate {
(9)  eap : Expiring EAP session with state 0xf04fa9faf845a423
(9)  eap : Finished EAP session with state 0xf04fa9faf845a423
(9)  eap : Previous EAP request found for state 0xf04fa9faf845a423,
released from the list
(9)  eap : Peer sent method TLS (13)
(9)  eap : EAP TLS (13)
(9)  eap : Calling eap_tls to process EAP data
(9)  eap_tls : Authenticate
(9)  eap_tls : processing EAP-TLS
(9)  eap_tls : Received TLS ACK
(9)  eap_tls : Received TLS ACK
(9)  eap_tls : ACK handshake is finished
(9)  eap_tls : eaptls_verify returned 3
(9)  eap_tls : eaptls_process returned 3
(9)  eap_tls : Saving session
f334a0969557e364415cbfb4ba2bd54f418d1da5490524c1d394b8b9317942b4 vps
0x7f995732fc00 in the cache
(9)  eap : Freeing handler
(9)   [eap] = ok
(9)  } #  authenticate = ok
(9) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(9)   post-auth {
(9)   [exec] = noop
(9)   remove_reply_message_if_eap remove_reply_message_if_eap {
(9)     if (&reply:EAP-Message && &reply:Reply-Message)
(9)     if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(9)    else else {
(9)     [noop] = noop
(9)    } # else else = noop
(9)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(9)  } #  post-auth = noop
(9) Sending Access-Accept packet to host 10.XX.XX.123 port 1645, id=6, length=0
(9) MS-MPPE-Recv-Key =
0xfaa281c3617f3014221f9d701eb760e7849e6c93550f52b2a05cc943c79a2b4e
(9) MS-MPPE-Send-Key =
0x108a6022d883528237ae8c72beadde69a362e94c7a836f4af3159783f038c3e5
(9) EAP-MSK = 0xfaa281c3617f3014221f9d701eb760e7849e6c93550f52b2a05cc943c79a2b4e108a6022d883528237ae8c72beadde69a362e94c7a836f4af3159783f038c3e5
(9) EAP-EMSK = 0x6480d679d4e11b6cdc2526aa310529e3221d573bba71d705aa779dae0e33968bae4d88c840ff91facd7e6dfda0c53b311a9f24279eddab746cf21cbd089187a9
(9) EAP-Session-Id =
0x0d57d1d43ecd441f115e1ec3d0d32af15b2732f7a02aa95c91b6a650966deab46b57d1dd45939c6a0dee55299d21b5463464981d5fb34fdd834e6e335f1d618323
(9) EAP-Message = 0x030a0004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) User-Name = 'Matthew West'
Sending Access-Accept Id 6 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
MS-MPPE-Recv-Key =
0xfaa281c3617f3014221f9d701eb760e7849e6c93550f52b2a05cc943c79a2b4e
MS-MPPE-Send-Key =
0x108a6022d883528237ae8c72beadde69a362e94c7a836f4af3159783f038c3e5
EAP-Message = 0x030a0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'Matthew West'
(9) Finished request
Waking up in 0.1 seconds.
Waking up in 4.5 seconds.
(0) Cleaning up request packet ID 253 with timestamp +98
(1) Cleaning up request packet ID 254 with timestamp +98
(2) Cleaning up request packet ID 255 with timestamp +98
(3) Cleaning up request packet ID 0 with timestamp +98
(4) Cleaning up request packet ID 1 with timestamp +98
(5) Cleaning up request packet ID 2 with timestamp +98
(6) Cleaning up request packet ID 3 with timestamp +98
(7) Cleaning up request packet ID 4 with timestamp +98
(8) Cleaning up request packet ID 5 with timestamp +98
(9) Cleaning up request packet ID 6 with timestamp +98
Ready to process requests

On Thu, Aug 25, 2016 at 10:54 AM, Matthew West <matthew.t.west@gmail.com> wrote:
...
Hi Alan,
...
For 802.1X is a closed loop system. Only those clients authing against you should trust you, this they can be configured to trust you. ..knowing your CA. If you use a public CA then anyone else can get a cert signed by that CA for small change, they can then do eg evil twin etc attacks and badly configured clients will auth against them. ..thus giving them the users password (or easily cloud cracked mschap challenge/response)... many clients have basic security...eg only trust the CA. So local CA is the one way to ensure lowest common denominator is secure.
So the client would trust anyone holding a cert issued by the root CA?
 That's not good.
...
Also there are requirements/flags in the root CA and server CA for RADIUS clients. ....and several clients do not work with wildcard server certs in RADIUS land (Note, you don't need a cert per RADIUS server either if its the same service)
Fun.  So at this point, I'm looking at either MS-CHAPv2 tied to an AD
server, using 3rd party server cert, or using self-signed certs for
authentication.  When using self-signed/generated certs, if I have
multiple locations with a RADIUS server at each location, can I use
the same user and ca certs across locations so users can roam?  Each
RADIUS server should have it's own server certificate, though,
correct?
I'm trying to understand feasibility here.  My directive was: wired
802.1X with existing user certs.
I've been doing network-specific work for the last decade (Firewalls,
routers, switches, load balancers, APs, etc.), so please excuse any
systems-specific knowledge I'm missing.  All my 802.1X work previously
was using AD, so I'm also new to using certs for network auth as well.
Thanks for your time, Alan.  I'm going back to the drawing board to
see what direction is best pursued.
Thank you,
Matthew
On Thu, Aug 25, 2016 at 10:36 AM, Alan Buxey <A.L.M.Buxey@lboro.ac.uk> wrote:
...
For 802.1X is a closed loop system. Only those clients authing against you
should trust you, this they can be configured to trust you. ..knowing your
CA. If you use a public CA then anyone else can get a cert signed by that CA
for small change, they can then do eg evil twin etc attacks and badly
configured clients will auth against them. ..thus giving them the users
password (or easily cloud cracked mschap challenge/response)... many clients
have basic security...eg only trust the CA. So local CA is the one way to
ensure lowest common denominator is secure. Couple this with other things -
eg if you use a public CA you are a slave to THEIR server timeframes,
policies etc. If that root becomes intermediate or the CA gets revoked by
the OS your service is hosed. Also there are requirements/flags in the root
CA and server CA for RADIUS clients. ....and several clients do not work
with wildcard server certs in RADIUS land
(Note, you don't need a cert per RADIUS server either if its the same
service)
Don't just take my word for it, its Best Common Practice to not use public
CAs - ask one of the main RADIUS RFC authors ;)
alan