Good day, I've had a freeradius + daloradius + mysql setup to be used for the authentication of our Allied Telesis switches at our different branches. I configured the switch to use radius authentication at Login, could someone check whether the output if radius works on the switch? As there is no access-accept message I received on radiusd -X Password is MD5 encrypted, if that helps. Thanks! ----- Ready to process requests. rad_recv: Accounting-Request packet from host 10.141.1.129 port 49154, id=0, length=84 User-Name = "netops" NAS-IP-Address = 10.141.1.129 Called-Station-Id = "10.141.1.129" Calling-Station-Id = "10.96.100.72" Acct-Status-Type = Start Acct-Session-Id = "0500001F" Acct-Authentic = Local # Executing section preacct from file /etc/raddb/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] WARNING: Attribute NAS-Port was not found in request, unique ID MAY be inconsistent [acct_unique] Hashing ',Client-IP-Address = 10.141.1.129,NAS-IP-Address = 10.141.1.129,Acct-Session-Id = "0500001F",User-Name = "netops"' [acct_unique] Acct-Unique-Session-ID = "b320652fa80c290b". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "netops", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: %{Packet-Src-IP-Address} -> 10.141.1.129 [detail] expand: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radius/radacct/10.141.1.129/detail-20130708 [detail] /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.141.1.129/detail-20130708 [detail] expand: %t -> Mon Jul 8 14:12:31 2013 ++[detail] returns ok ++[unix] returns noop [radutmp] expand: /var/log/radius/radutmp -> /var/log/radius/radutmp [radutmp] expand: %{User-Name} -> netops rlm_radutmp: No NAS-Port seen. Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work! ++[radutmp] returns noop [sql] expand: %{User-Name} -> netops [sql] sql_set_user escaped user --> 'netops' [sql] expand: %{Acct-Delay-Time} -> [sql] ... expanding second conditional [sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[exec] returns noop [attr_filter.accounting_response] expand: %{User-Name} -> netops attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 0 to 10.141.1.129 port 49154 Finished request 0. Cleaning up request 0 ID 0 with timestamp +72 Going to the next request Ready to process requests.