I thought if you had a certificate signed by a trusted root CA, you were good and didn't need to install anything on the client. I don't have my server certificate installed on my windows clients, only my CA certificate. if I chose to use verisign, I wouldn't have needed to do that, but I would have needed to verisign ALL of my client certificates (I use wpa2-eap-tls). On 9/19/2011 16:15, Sallee, Stephen (Jake) wrote:
If I understand your question correctly you want to use FR to authenticate users against a Microsoft AD server, that the clients themselves are windows based or not is not altogether too important.
If this is indeed what you are trying to do, is there any reason you are not able to use NTLM? It makes the actual authentication portion VERY easy, you can then do any fancy stuff with LDAP searches for group memberships, etc. knowing that the user IS an authenticated user. NTLM will allow your users to do PEAP/MSCHAPv2 authentication, the catch is that they need to have the cert for the FR server installed OR do some manual tweaking of the interface. We worked around this by writing a simple program to install the server cert and configure the wifi interface for the user.
The cert issue is a limitation of Windows NOT FR! MS claims it is for security reasons, but in truth it is just a foolish blunder. 3rd party supplicants will do the trick but they area pain to deploy to assets that you do not manage. Long story short: on Windows, there is NO way to use PEAP/MSCHAPv2 (or indeed any cert based auth method) without installing the server cert or manually tweaking the interface config, or using a less broken supplicant ... sorry.
If someone can prove me wrong, please, please, PLEASE, tell me, this has been a huge pain for us!
Jake Sallee Godfather of Bandwidth System Engineer University of Mary Hardin-Baylor 900 College St. Belton, Texas 76513 Fone: 254-295-4658 Phax: 254-295-4221
-----Original Message----- From: freeradius-users-bounces+jake.sallee=umhb.edu@lists.freeradius.org [mailto:freeradius-users-bounces+jake.sallee=umhb.edu@lists.freeradius.org] On Behalf Of uselessidbr Sent: Monday, September 19, 2011 5:19 PM To: freeradius-users@lists.freeradius.org Subject: Freeradius + Fedora-DS + EAP-MSCHAPv2 for WIFI/AP authentication
Hello.
People, i've read a lot about the WIFI/AP authentication over Freeradius using LDAP but it seems i cannot make it work unless i use clear-text password or Nt/Lmpassword which as far as i know implies in Samba + LDAP integration.
My question is, is that really the only way to make freeradius authenticate users using a LDAP database?
Do i need to have samba + ldap to authenticate WIFI users using freeradius + LDAP with EAP-MSCHAPv2?
If so, is there any other solution to authenticate Windows WIFI users without using a 3rd party wifi supplicant?
Definetely, theres no other way i can use freeradius and fedora-ds without Samba/clear-text password OR a 3rd party supplicant that supports EAP/PAP?
With my current configuration i was able to authenticate LDAP users with clear-text password but thats not i really want as a WIFI authentication solution. My goal is to use freeradius to authenticate WIFI users using a LDAP database and without the need of use a non-native Windows application.
Here goes my debug using a encrypted user password (which fails):
*FreeRADIUS Version 2.1.10, for host x86_64-redhat-linux-gnu, built on Mar 25 2011 at 10:54:38 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm mydomain { authhost = LOCAL accthost = LOCAL } realm host { authhost = LOCAL accthost = LOCAL } realm teste { authhost = LOCAL accthost = LOCAL } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.10.10.1 { require_message_authenticator = no secret = "password" shortname = "AP1" } client 10.10.10.2 { require_message_authenticator = no secret = "password" shortname = "AP2" }
radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap ldap { server = "10.10.10.15" port = 389 password = "mypassword" identity = "cn=user,dc=domain" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no cacertfile = "/etc/raddb/cacert.pem" cacertdir = "/etc/raddb/" certfile = "/etc/raddb/server.pem" keyfile = "/etc/raddb/certs/server.key" randfile = "/dev/urandom" require_cert = "allow" } basedn = "ou=User,dc=domain" filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "userPassword" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x7fbe6f08c1d0 Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.key" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "password" dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "IPASS" from file /etc/raddb/modules/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Instantiating module "ntdomain" from file /etc/raddb/modules/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=214 User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 0x0200000b01746573746532 Message-Authenticator = 0xcd3cde11fdb9c9e173401a1ab63137d0 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 0 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for teste2 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> teste2 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=teste2) [ldap] expand: ou=Users,dc=domain -> ou=Users,dc=domain [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to 10.10.10.15:389, authentication 0 [ldap] setting TLS CACert File to /etc/raddb/cacert.pem [ldap] setting TLS CACert Directory to /etc/raddb/ [ldap] setting TLS Cert File to /etc/raddb/server.pem [ldap] setting TLS Key File to /etc/raddb/certs/server.key [ldap] setting TLS Key File to /dev/urandom [ldap] bind as cn=user,dc=domain/password to 10.10.10.15:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=Users,dc=domain, with filter (uid=teste2) [ldap] Added User-Password = {SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk= in check items [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk=" [ldap] looking for reply items in directory... [ldap] user teste2 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 254 to 10.10.10.1 port 42873 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7c592a0f7c48bb76be870fae22db0ee Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=326 Cleaning up request 0 ID 254 with timestamp +15 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf7c592a0f7c48bb7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 0x0201006919800000005f160301005a0100005603014e77ac4ef302031ce6cf78b5efa69c7b099159b307be6b4012f60c9ce315c67a000018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100 State = 0xf7c592a0f7c48bb76be870fae22db0ee Message-Authenticator = 0xcc0f4382d29993c82ea7d5f28d83ec6d # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 1 length 105 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 95 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap]<<< TLS 1.0 Handshake [length 005a], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap]>>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap]>>> TLS 1.0 Handshake [length 084e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap]>>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 254 to 10.10.10.1 port 42873 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x6bc456db3a90e9f9bc07dd7cbe5bde908110897dcd7e9de6c433b95f64948d153d3112330ff1c1556ad6f17703448769c8ac1f75be0299da1599afd53077cbbafea440095a26c1f5c7c383a333f1fd17c6006ef66ebab59d4e469dc9fd5a2efcac5c55ccf10832263ad166792185a68ee04eae8004ce13ea9af3319b9cbc8abbf486dc29ae8577c46f57da3311b056f8a525e00c1ba7c728f707ff7e20d730bec81811ba0132fa83030d0c0f2c150a9590d3610e0035f70f562818e395b5e3e9e45c9f692f9992caf1dd21d81d25291f981eda4323de4e3b053480a06e19d5ba7280eea50f03af7ba7041286dfca1c5dbdd43ee90004a5308204a13082 EAP-Message = 0x0389a003020102020900e0c2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7c592a0f6c78bb76be870fae22db0ee Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=227 Cleaning up request 1 ID 254 with timestamp +15 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf7c592a0f6c78bb7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 0x020200061900 State = 0xf7c592a0f6c78bb76be870fae22db0ee Message-Authenticator = 0x841c3e3abcb3dae6bd7e27170021ad46 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 2 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 254 to 10.10.10.1 port 42873 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x80dc01dc76af44cc Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7c592a0f5c68bb76be870fae22db0ee Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=227 Cleaning up request 2 ID 254 with timestamp +15 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf7c592a0f5c68bb7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 0x020300061900 State = 0xf7c592a0f5c68bb76be870fae22db0ee Message-Authenticator = 0x0a39b42d7de2a7b38ed8cf7b807d341c # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 254 to 10.10.10.1 port 42873 EAP-Message = 0x010400ac1900952b3388d9fc8a18902a7ca2464057045b225266793cad184508c644fc450b67d8d016c13e1a97223a5527ed1dd363c511abe6d9e39ea657cf521efa4088ec8560b1fb3bc99c16291861233ee7991f1190ff7ad5dceda93c0806e1d53fd3a51f26ea62917bf1129cd8cf3641e8bfa4578aaf5b05faef5dbe70f444573b7771bcaccffcb6dcb83f3c4219f8a51e65b18379a9a234940a859e6796bbc39816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7c592a0f4c18bb76be870fae22db0ee Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=559 Cleaning up request 3 ID 254 with timestamp +15 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf7c592a0f4c18bb7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 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 EAP-Message = 0x023c90c2eaa483212cd56dee5f2eb41ce20867c910eac4920114030100010116030100302bdb38b496d679466f1893edff2f8eb093624b411c47368c13c583a737d0bec2f68dd3e7d53b98d27dfbc986248cb05f State = 0xf7c592a0f4c18bb76be870fae22db0ee Message-Authenticator = 0xa522fecab2ac7eca750166755205bf27 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 4 length 252 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap]<<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap]<<< TLS 1.0 ChangeCipherSpec [length 0001] [peap]<<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap]>>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap]>>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 254 to 10.10.10.1 port 42873 EAP-Message = 0x0105004119001403010001011603010030d1e5dba0e82d06aa0efc4287843d8208d124a58d449a582c793dc50977fc3d0b85c0aef80bfc5e004d93ae6ce60d0ed5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7c592a0f3c08bb76be870fae22db0ee Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=227 Cleaning up request 4 ID 254 with timestamp +15 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf7c592a0f3c08bb7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 0x020500061900 State = 0xf7c592a0f3c08bb76be870fae22db0ee Message-Authenticator = 0x0b80ba1e60a27eeb5eb41f1458465a19 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 254 to 10.10.10.1 port 42873 EAP-Message = 0x0106002b190017030100205764f8ef2b3b7d310fa296587d149cb2a3f7ed99b582d06f9083773de55dc14d Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7c592a0f2c38bb76be870fae22db0ee Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=264 Cleaning up request 5 ID 254 with timestamp +15 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf7c592a0f2c38bb7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 0x0206002b190017030100207dea7432b1b04d11512baf1695f76ff6b7b9ce4b2b3ae758c52da2236bbfc395 State = 0xf7c592a0f2c38bb76be870fae22db0ee Message-Authenticator = 0x85cf9261aac6080e4048a0b9d23c7176 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 6 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - teste2 [peap] Got inner identity 'teste2' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0206000b01746573746532 server { PEAP: Setting User-Name to teste2 Sending tunneled request EAP-Message = 0x0206000b01746573746532 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 server inner-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop ++[control] returns noop [eap] EAP packet type response id 6 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for teste2 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> teste2 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=teste2) [ldap] expand: ou=Users,dc=domain -> ou=Users,dc=domain [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=Users,dc=domain, with filter (uid=teste2) [ldap] Added User-Password = {SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk= in check items [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk=" [ldap] looking for reply items in directory... [ldap] user teste2 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010700201a0107001b103a5115f773349150b9b5946cfbff32d0746573746532 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbe0fa53abe08bf4800211b259017b493 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010700201a0107001b103a5115f773349150b9b5946cfbff32d0746573746532 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbe0fa53abe08bf4800211b259017b493 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 254 to 10.10.10.1 port 42873 EAP-Message = 0x0107004b1900170301004042ba4c5209794b623511eacc7f0bb8ee3e5bb95842822987291efd1f421464113439a4b10135432498834418ec8a98a86a81aa45f7acfe3832bbb6f8322e7977 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7c592a0f1c28bb76be870fae22db0ee Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=328 Cleaning up request 6 ID 254 with timestamp +15 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf7c592a0f1c28bb7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 0x0207006b1900170301006081c9d132cfa04368529dade57d67641e7fd3b378acac26d660c7a84c45a8f53ad96d366b40632a6fa8edaf935b809d4470016bde67708bbb5c33faa93f9a7f7df7e87f30fb963c0bd4c0e435206f2e235c56100377c8acba97ab332b6b7cff4e State = 0xf7c592a0f1c28bb76be870fae22db0ee Message-Authenticator = 0xca3d17d60332ac20951db7bde6f666a0 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 7 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020700411a0207003c3166967fb6fe3977d049f2c9bc6916ed8c000000000000000088e0c96ae4e8b5f451d108eff34d695a452a9b67e1348db400746573746532 server { PEAP: Setting User-Name to teste2 Sending tunneled request EAP-Message = 0x020700411a0207003c3166967fb6fe3977d049f2c9bc6916ed8c000000000000000088e0c96ae4e8b5f451d108eff34d695a452a9b67e1348db400746573746532 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "teste2" State = 0xbe0fa53abe08bf4800211b259017b493 NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 server inner-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop ++[control] returns noop [eap] EAP packet type response id 7 length 65 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for teste2 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> teste2 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=teste2) [ldap] expand: ou=Users,dc=domain -> ou=Users,dc=domain [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=Users,dc=domain, with filter (uid=teste2) [ldap] Added User-Password = {SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk= in check items [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk=" [ldap] looking for reply items in directory... [ldap] user teste2 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/raddb/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: teste2 [mschap] Told to do MS-CHAPv2 for teste2 with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 254 to 10.10.10.1 port 42873 EAP-Message = 0x0108002b190017030100201e991601faad6e17dbd36948aaa0ffa54bab24d9694a5f874f454b3c9068678f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7c592a0f0cd8bb76be870fae22db0ee Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254, length=264 Cleaning up request 7 ID 254 with timestamp +15 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf7c592a0f0cd8bb7 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "teste2" NAS-IP-Address = 10.10.10.2 NAS-Port = 51 Framed-MTU = 1400 Called-Station-Id = "00:04:96:32:c1:bd" Calling-Station-Id = "74:f0:6d:0a:ce:4f" NAS-Port-Type = Wireless-802.11 NAS-Identifier = "teste" Extreme-Attr-3 = 0x31303030303038303144303831323937 Extreme-Attr-2 = 0x544943 Extreme-Attr-4 = 0x7465737465 Extreme-Attr-5 = 0x7465737465 Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264 EAP-Message = 0x0208002b190017030100200f24e2e08569178721784c13cfa2fed7b033940f2b653d7616966358be7e87eb State = 0xf7c592a0f0cd8bb76be870fae22db0ee Message-Authenticator = 0x775b3a54b6f3809cbff7365813a3ae59 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "teste2", looking up realm NULL [IPASS] No such realm "NULL" ++[IPASS] returns noop [suffix] No '@' in User-Name = "teste2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 8 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> teste2 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 254 to 10.10.10.1 port 42873 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 4.9 seconds.*
Thanks in advance, Gustavo.
-- View this message in context: http://freeradius.1045715.n5.nabble.com/Freeradius-Fedora-DS-EAP-MSCHAPv2-fo... Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html