Hi, I´ve got freeradius instaled on redhat enterprise 3, configured and working :-) But now I need to create a diferents IP pools, I tryed to do it but I can't :-( I´ve created two ippool on radiusd.conf. # ippool main_pool { # range-start,range-stop: The start and end ip # addresses for the ip pool range-start = 192.168.1.1 range-stop = 192.168.3.254 # netmask: The network mask used for the ip's netmask = 255.255.255.0 # cache-size: The gdbm cache size for the db # files. Should be equal to the number of ip's # available in the ip pool cache-size = 800 # session-db: The main db file used to allocate ip's to clients session-db = ${raddbdir}/db.ippool # ip-index: Helper db index file used in multilink ip-index = ${raddbdir}/db.ipindex # override: Will this ippool override a Framed-IP-Address already set override = no # maximum-timeout: If not zero specifies the maximum time in seconds an # entry may be active. Default: 0 maximum-timeout = 0 } ippool General { range-start = 192.168.75.1 range-stop = 192.168.75.126 netmask = 255.255.255.0 cache-size = 800 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = no maximum-timeout = 0 } If I configure the user to take an static IP it works fine, but when I try to take from IP pool it doesn´t works. javi Auth-Type := Local, User-Password == "123456" Service-Type = Framed, Framed-Protocol = PPP, Framed-IP-Address = 192.168.77.35, Framed-IP-Netmask = 255.255.255.255, Ascend-Maximum-Time = 28800, Ascend-Idle-Limit = 1800 ion Auth-Type := Local, User-Password == "123456" Pool-Name := "General" Service-Type = Framed-User, Framed-Protocol = PPP, Ascend-Assign-IP-Pool = 7, Ascend-Maximum-Time = 28800, Ascend-Idle-Limit = 1800 Any idea?