<!-- _filtered {margin:0.79in;} P {margin-bottom:0.08in;} -->Hi everyone Merry Christmas and a Happy new year , I am trying to set up freeradius-1.1.3 for a wlan using peap - eap/mschapv2. I have downloaded the source of freeradius-1.1.3 and compile it (./configure , make , make install). My wireless supplicant is on windows xp SP2. I use users file for authentication . I will show you the radiusd -X output and the freeradius behavior when the supplicant tries to connect to the wlan: root@apolyxrono2:~# radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: bind_address = 10.0.0.15 IP address [10.0.0.15] main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = no mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = yes mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/server_keycert.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/server_keycert.pem" tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = yes peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication 10.0.0.15:1812 Listening on accounting 10.0.0.15:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.0.0.10:3794, id=160, length=132 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "someone" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" EAP-Message = 0x0201000c01736f6d656f6e65 Message-Authenticator = 0x160e121c6c28afb7f18ee9f0862390d0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "someone", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 155 users: Matched entry someone at line 219 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type Local auth: type Local auth: No User-Password or CHAP-Password attribute in the request auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 160 to 10.0.0.10 port 3794 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 160 with timestamp 4596dbfe Nothing to do. Sleeping until we see a request. rad_recv: Accounting-Request packet from host 10.0.0.10:3791, id=45, length=166 Acct-Status-Type = Start Acct-Session-Id = "00166f122595-000d54fdb5ea-bcf9" NAS-IP-Address = 10.0.0.10 Acct-Input-Octets = 198 Acct-Output-Octets = 122 Acct-Input-Packets = 3 Acct-Output-Packets = 3 User-Name = "not available" Vendor-Specific = 0x564c414e2049442069733a2030 Vendor-Specific = 0x4553534944203d206d794170 Vendor-Specific = 0x45415020547970652069733a206e6f7420617661696c61626c65 Acct-Session-Time = 26 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 1 modcall[preacct]: module "preprocess" returns noop for request 1 rlm_acct_unique: WARNING: Attribute NAS-Port was not found in request, unique ID MAY be inconsistent rlm_acct_unique: Hashing ',Client-IP-Address = 10.0.0.10,NAS-IP-Address = 10.0.0.10,Acct-Session-Id = "00166f122595-000d54fdb5ea-bcf9",User-Name = "not available"' rlm_acct_unique: Acct-Unique-Session-ID = "11a74fb405c72016". modcall[preacct]: module "acct_unique" returns ok for request 1 rlm_realm: No '@' in User-Name = "not available", looking up realm NULL rlm_realm: No such realm "NULL" modcall[preacct]: module "suffix" returns noop for request 1 modcall[preacct]: module "files" returns noop for request 1 modcall: leaving group preacct (returns ok) for request 1 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 1 radius_xlat: '/usr/local/var/log/radius/radacct/10.0.0.10/detail-20061230' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.0.0.10/detail-20061230 modcall[accounting]: module "detail" returns ok for request 1 modcall[accounting]: module "unix" returns noop for request 1 radius_xlat: '/usr/local/var/log/radius/radutmp' radius_xlat: 'not available' rlm_radutmp: No NAS-Port seen. Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work! modcall[accounting]: module "radutmp" returns noop for request 1 modcall: leaving group accounting (returns ok) for request 1 Sending Accounting-Response of id 45 to 10.0.0.10 port 3791 Finished request 1 Going to the next request --- Walking the entire request list --- Cleaning up request 1 ID 45 with timestamp 4596dc07 Nothing to do. Sleeping until we see a request. .............................. Why the authentication of "someone" user failed ? What does it means : module "mschap" returns noop for request 0 ? Is it important debug info ? thanks Adreas Polyxronopoulos Send instant messages to your online friends http://uk.messenger.yahoo.com Send instant messages to your online friends http://uk.messenger.yahoo.com