Re: EAP-TEAP not doing 2nd inner Method

5 Dec 2024


      ...
The debug log shows it doing only Machine.
Ah yes, you are right. The server does not change the Identity-Type and is
just requesting Machine again:
...
(12) eap_teap: &session-state:FreeRADIUS-EAP-TEAP-TLV-Identity-Type set
so continuing EAP sequence/chaining
...
...
(13) eap_teap: Got Tunneled TEAP TLVs
(13) eap_teap:   FreeRADIUS-EAP-TEAP-Crypto-Binding =
...
0x0001012120d4a17ea3e426b59e5ba4890e39fa9b1d90231cee551afab4
560f20713d4dd30000000000000000000000000000000000000000eded82
e4898493cf26b6208f3d491c1c9aa998cb
(13) eap_teap:   FreeRADIUS-EAP-TEAP-Intermediate-Result = Success

(13) eap_teap:   FreeRADIUS-EAP-TEAP-Identity-Type = Machine

(13) eap_teap:   FreeRADIUS-EAP-TEAP-EAP-Payload =
...
0x020e002301686f73742f6d617274696e2d746573742d636f6d70757465722d63657274
I'll take a look.  I'm not sure what's happening there, but I've pushed
...
some more debug messages which may help clarify the issues.
FreeRADIUS Version 3.2.7
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/totp
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file
/usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/rfc7542
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
 security {
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        logdir = "/usr/local/var/log/radius"
        run_dir = "/usr/local/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        sbindir = "/usr/local/sbin"
        logdir = "/usr/local/var/log/radius"
        run_dir = "/usr/local/var/run/radiusd"
        libdir = "/usr/local/lib"
        radacctdir = "/usr/local/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        proxy_dedup_window = 1
        cleanup_delay = 5
        max_requests = 16384
        max_fds = 512
        postauth_client_lost = no
        pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
        require_message_authenticator = "auto"
        limit_proxy_state = "auto"
        allow_vulnerable_openssl = "no"
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client 0.0.0.0/0 {
        ipaddr = 0.0.0.0/0
        secret = <<< secret >>>
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Shared secret for client 0.0.0.0/0 is short, and likely can be broken by an
attacker.
Debugger not attached
Configuration version: 7ed5-6990-28d9-1125
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename =
"/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename =
"/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename =
"/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.coa" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
        utc = no
  }
  # Loading module "wispr2date" from file
/usr/local/etc/raddb/mods-enabled/date
  date wispr2date {
        format = "%Y-%m-%dT%H:%M:%S"
        utc = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
  detail {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file
/usr/local/etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "teap"
        timer_expire = 60
        max_eap_type = 52
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
        dedup_key = ""
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
        filename = "/usr/local/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile =
"/usr/local/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/usr/local/var/log/radius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/usr/local/var/log/radius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file
/usr/local/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups =
"/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file
/usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/usr/local/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file
/usr/local/etc/raddb/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "sradutmp" from file
/usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/usr/local/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_totp
  # Loading module "totp" from file /usr/local/etc/raddb/mods-enabled/totp
  totp {
        time_step = 30
        otp_length = 6
        lookback_steps = 1
        lookback_interval = 30
        lookforward_steps = 0
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file
/usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  instantiate {
  }
  # Instantiating module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa
  # Instantiating module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file
/usr/local/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/usr/local/etc/raddb/certs/teap"
        pem_file_type = yes
        private_key_file = "/usr/local/etc/raddb/certs/teap/server.pem"
        certificate_file = "/usr/local/etc/raddb/certs/teap/server.pem"
        ca_file = "/usr/local/etc/raddb/certs/teap/ca.pem"
        private_key_password = <<< secret >>>
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        ca_path_reload_interval = 0
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        reject_unknown_intermediate_ca = no
        ecdh_curve = ""
        tls_max_version = "1.2"
        tls_min_version = "1.2"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
   # Linked to sub-module rlm_eap_teap
   teap {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        require_client_cert = no
        authority_identity = "1234"
        virtual_server = "inner-tunnel"
        identity_types = "machine,user"
        user_eap_type = "tls"
        machine_eap_type = "tls"
   }
tls: Using cached TLS configuration from previous invocation
  # Instantiating module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file
/usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file
/usr/local/etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file
/usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file
/usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "bangpath" from file
/usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "totp" from file
/usr/local/etc/raddb/mods-enabled/totp
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/usr/local/etc/raddb/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 1645
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 900
   }
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on auth address * port 1645 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Ready to process requests
(0) Received Access-Request Id 44 from 10.78.1.215:1645 to 10.78.5.223:1645
length 260
(0)   User-Name = "anonymous"
(0)   Service-Type = Framed-User
(0)   Cisco-AVPair = "service-type=Framed"
(0)   Framed-MTU = 1500
(0)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(0)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(0)   EAP-Message = 0x0201000e01616e6f6e796d6f7573
(0)   Message-Authenticator = 0x6952f87e994dc9cd99c35142794587f4
(0)   Cisco-AVPair = "audit-session-id=0A4E01D7000007352E347F3C"
(0)   Cisco-AVPair = "method=dot1x"
(0)   Framed-IP-Address = 10.78.5.3
(0)   NAS-IP-Address = 10.78.1.215
(0)   NAS-Port-Id = "GigabitEthernet1/0/10"
(0)   NAS-Port-Type = Ethernet
(0)   NAS-Port = 50110
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_teap to process data
(0) eap_teap: (TLS) TEAP -Initiating new session
(0) eap_teap: Setting &session-state:FreeRADIUS-EAP-TEAP-Identity-Type =
Machine
(0) eap_teap: Followed by &session-state:FreeRADIUS-EAP-TEAP-Identity-Type
+= Machine
(0) eap: Sending EAP Request (code 1) ID 2 length 18
(0) eap: EAP session adding &reply:State = 0x7a596d877a5b5a00
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 984
(0)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(0)   FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(0) Sent Access-Challenge Id 44 from 10.78.5.223:1645 to 10.78.1.215:1645
length 76
(0)   EAP-Message = 0x010200123731000000080001000431323334
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x7a596d877a5b5a006aa56f4f6e83cec8
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 45 from 10.78.1.215:1645 to 10.78.5.223:1645
length 426
(1)   User-Name = "anonymous"
(1)   Service-Type = Framed-User
(1)   Cisco-AVPair = "service-type=Framed"
(1)   Framed-MTU = 1500
(1)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(1)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(1)   EAP-Message =
0x020200a2370116030300970100009303036751c4c6985ecbcc8fcb6e087c39a49b677dcc21b6b739ec711dd627ed012992000024c02cc02bc030c02fc024c023c028c027c00ac009c014c013009d009c003d003c0035002f01000046000500050100000000000a00080006001d00170018000b00020100000d001a00180804080508060401050102010403050302030202060106030023000000170000ff01000100
(1)   Message-Authenticator = 0xb9258eba55b67ef5e40695b6e9d63750
(1)   Cisco-AVPair = "audit-session-id=0A4E01D7000007352E347F3C"
(1)   Cisco-AVPair = "method=dot1x"
(1)   Framed-IP-Address = 10.78.5.3
(1)   NAS-IP-Address = 10.78.1.215
(1)   NAS-Port-Id = "GigabitEthernet1/0/10"
(1)   NAS-Port-Type = Ethernet
(1)   NAS-Port = 50110
(1)   State = 0x7a596d877a5b5a006aa56f4f6e83cec8
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 984
(1)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(1)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(1) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 162
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Removing EAP session with state 0x7a596d877a5b5a00
(1) eap: Previous EAP request found for state 0x7a596d877a5b5a00, released
from the list
(1) eap: Peer sent packet with method EAP TEAP (55)
(1) eap: Calling submodule eap_teap to process data
(1) eap_teap: Authenticate
(1) eap_teap: (TLS) EAP Got final fragment (156 bytes)
(1) eap_teap: WARNING: (TLS) EAP Total received record fragments (156
bytes), does not equal expected expected data length (0 bytes)
(1) eap_teap: (TLS) EAP Done initial handshake
(1) eap_teap: (TLS) TEAP - Handshake state - before SSL initialization
(1) eap_teap: (TLS) TEAP - Handshake state - Server before SSL
initialization
(1) eap_teap: (TLS) TEAP - Handshake state - Server before SSL
initialization
(1) eap_teap: (TLS) TEAP - recv TLS 1.3 Handshake, ClientHello
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read client
hello
(1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerHello
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server
hello
(1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, Certificate
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write
certificate
(1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write key
exchange
(1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone
(1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server
done
(1) eap_teap: (TLS) TEAP - Server : Need to read more data: SSLv3/TLS write
server done
(1) eap_teap: (TLS) TEAP - In Handshake Phase
(1) eap: Sending EAP Request (code 1) ID 3 length 994
(1) eap: EAP session adding &reply:State = 0x7a596d877b5a5a00
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 984
(1)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(1)   FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(1)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(1)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(1)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(1)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(1)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(1) Sent Access-Challenge Id 45 from 10.78.5.223:1645 to 10.78.1.215:1645
length 1058
(1)   EAP-Message =
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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x7a596d877b5a5a006aa56f4f6e83cec8
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 46 from 10.78.1.215:1645 to 10.78.5.223:1645
length 270
(2)   User-Name = "anonymous"
(2)   Service-Type = Framed-User
(2)   Cisco-AVPair = "service-type=Framed"
(2)   Framed-MTU = 1500
(2)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(2)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(2)   EAP-Message = 0x020300063701
(2)   Message-Authenticator = 0xcc12be8025179f2f60cd640c6e82b94c
(2)   Cisco-AVPair = "audit-session-id=0A4E01D7000007352E347F3C"
(2)   Cisco-AVPair = "method=dot1x"
(2)   Framed-IP-Address = 10.78.5.3
(2)   NAS-IP-Address = 10.78.1.215
(2)   NAS-Port-Id = "GigabitEthernet1/0/10"
(2)   NAS-Port-Type = Ethernet
(2)   NAS-Port = 50110
(2)   State = 0x7a596d877b5a5a006aa56f4f6e83cec8
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 984
(2)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(2)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(2)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(2) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Removing EAP session with state 0x7a596d877b5a5a00
(2) eap: Previous EAP request found for state 0x7a596d877b5a5a00, released
from the list
(2) eap: Peer sent packet with method EAP TEAP (55)
(2) eap: Calling submodule eap_teap to process data
(2) eap_teap: Authenticate
(2) eap_teap: (TLS) Peer ACKed our handshake fragment
(2) eap: Sending EAP Request (code 1) ID 4 length 990
(2) eap: EAP session adding &reply:State = 0x7a596d87785d5a00
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 984
(2)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(2)   FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(2)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(2)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(2)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(2)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(2) Sent Access-Challenge Id 46 from 10.78.5.223:1645 to 10.78.1.215:1645
length 1054
(2)   EAP-Message =
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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x7a596d87785d5a006aa56f4f6e83cec8
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 47 from 10.78.1.215:1645 to 10.78.5.223:1645
length 270
(3)   User-Name = "anonymous"
(3)   Service-Type = Framed-User
(3)   Cisco-AVPair = "service-type=Framed"
(3)   Framed-MTU = 1500
(3)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(3)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(3)   EAP-Message = 0x020400063701
(3)   Message-Authenticator = 0xcccf55c556037e14c21a845197bee436
(3)   Cisco-AVPair = "audit-session-id=0A4E01D7000007352E347F3C"
(3)   Cisco-AVPair = "method=dot1x"
(3)   Framed-IP-Address = 10.78.5.3
(3)   NAS-IP-Address = 10.78.1.215
(3)   NAS-Port-Id = "GigabitEthernet1/0/10"
(3)   NAS-Port-Type = Ethernet
(3)   NAS-Port = 50110
(3)   State = 0x7a596d87785d5a006aa56f4f6e83cec8
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 984
(3)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(3)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(3) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Removing EAP session with state 0x7a596d87785d5a00
(3) eap: Previous EAP request found for state 0x7a596d87785d5a00, released
from the list
(3) eap: Peer sent packet with method EAP TEAP (55)
(3) eap: Calling submodule eap_teap to process data
(3) eap_teap: Authenticate
(3) eap_teap: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 5 length 459
(3) eap: EAP session adding &reply:State = 0x7a596d87795c5a00
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 984
(3)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(3)   FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(3)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(3)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(3)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(3)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(3) Sent Access-Challenge Id 47 from 10.78.5.223:1645 to 10.78.1.215:1645
length 519
(3)   EAP-Message =
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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x7a596d87795c5a006aa56f4f6e83cec8
(3) Finished request
Waking up in 4.8 seconds.
(4) Received Access-Request Id 48 from 10.78.1.215:1645 to 10.78.5.223:1645
length 363
(4)   User-Name = "anonymous"
(4)   Service-Type = Framed-User
(4)   Cisco-AVPair = "service-type=Framed"
(4)   Framed-MTU = 1500
(4)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(4)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(4)   EAP-Message =
0x020500633701160303002510000021205cc2d801255fe0efb776b41691ed303e42d6e194e1236da7ae88938ee2af667214030300010116030300280000000000000000ae43149964e478ded2684a1860b114d581e26ed03f91168fb2c61798928dc5a2
(4)   Message-Authenticator = 0xa46f7ee48cd3b2bd3f61838ca75b0ae1
(4)   Cisco-AVPair = "audit-session-id=0A4E01D7000007352E347F3C"
(4)   Cisco-AVPair = "method=dot1x"
(4)   Framed-IP-Address = 10.78.5.3
(4)   NAS-IP-Address = 10.78.1.215
(4)   NAS-Port-Id = "GigabitEthernet1/0/10"
(4)   NAS-Port-Type = Ethernet
(4)   NAS-Port = 50110
(4)   State = 0x7a596d87795c5a006aa56f4f6e83cec8
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 984
(4)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(4)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(4) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 99
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Removing EAP session with state 0x7a596d87795c5a00
(4) eap: Previous EAP request found for state 0x7a596d87795c5a00, released
from the list
(4) eap: Peer sent packet with method EAP TEAP (55)
(4) eap: Calling submodule eap_teap to process data
(4) eap_teap: Authenticate
(4) eap_teap: (TLS) EAP Done initial handshake
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server
done
(4) eap_teap: (TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read client
key exchange
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read change
cipher spec
(4) eap_teap: (TLS) TEAP - recv TLS 1.2 Handshake, Finished
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read finished
(4) eap_teap: (TLS) TEAP - send TLS 1.2 ChangeCipherSpec
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write change
cipher spec
(4) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, Finished
(4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write finished
(4) eap_teap: (TLS) TEAP - Handshake state - SSL negotiation finished
successfully
(4) eap_teap: (TLS) TEAP - Connection Established
(4) eap_teap:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) eap_teap:   TLS-Session-Version = "TLS 1.2"
(4) eap: Sending EAP Request (code 1) ID 6 length 57
(4) eap: EAP session adding &reply:State = 0x7a596d877e5f5a00
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 984
(4)   FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(4)   FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(4)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake,
ClientHello"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHello"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Certificate"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
ServerHelloDone"
(4)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
ClientKeyExchange"
(4)   TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake,
Finished"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec"
(4)   TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake,
Finished"
(4)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4)   TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 48 from 10.78.5.223:1645 to 10.78.1.215:1645
length 115
(4)   EAP-Message =
0x01060039370114030300010116030300281f7f5aed21ff16ada3a4a2e752074554ad6c4a48b96eeaa97b0072025abb6a3b3949238ef1ff5aa5
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x7a596d877e5f5a006aa56f4f6e83cec8
(4) Finished request
Waking up in 4.8 seconds.
(5) Received Access-Request Id 49 from 10.78.1.215:1645 to 10.78.5.223:1645
length 270
(5)   User-Name = "anonymous"
(5)   Service-Type = Framed-User
(5)   Cisco-AVPair = "service-type=Framed"
(5)   Framed-MTU = 1500
(5)   Called-Station-Id = "00-3C-10-AB-A2-8A"
(5)   Calling-Station-Id = "C8-F7-50-08-DD-9F"
(5)   EAP-Message = 0x020600063701
(5)   Message-Authenticator = 0x74ba42af7396d6b2c0406a936ad4ef33
(5)   Cisco-AVPair = "audit-session-id=0A4E01D7000007352E347F3C"
(5)   Cisco-AVPair = "method=dot1x"
(5)   Framed-IP-Address = 10.78.5.3
(5)   NAS-IP-Address = 10.78.1.215
(5)   NAS-Port-Id = "GigabitEthernet1/0/10"
(5)   NAS-Port-Type = Ethernet
(5)   NAS-Port = 50110
(5)   State = 0x7a596d877e5f5a006aa56f4f6e83cec8
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 984
(5)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type := Machine
(5)   &session-state:FreeRADIUS-EAP-TEAP-Identity-Type += Machine
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3
Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, ServerHelloDone"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, ClientKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2
Handshake, Finished"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
ChangeCipherSpec"
(5)   &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2
Handshake, Finished"
(5)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(5)   &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Removing EAP session with state 0x7a596d877e5f5a00
(5) eap: Previous EAP request found for state 0x7a596d877e5f5a00, released
from the list
(5) eap: Peer sent packet with method EAP TEAP (55)
(5) eap: Calling submodule eap_teap to process data
(5) eap_teap: Authenticate
(5) eap_teap: (TLS) Peer ACKed our handshake fragment.  handshake is
finished
(5) eap_teap: Session established.  Proceeding to decode tunneled attributes
(5) eap_teap: Using authenticated provisioning
(5) eap_teap: Using MAC SHA384 (673)
(5) eap_teap: Deriving EAP-TEAP keys
ASSERT FAILED src/modules/rlm_eap/types/rlm_eap_teap/eap_teap.c[77]:
t->received_version > -1
CAUGHT SIGNAL: Aborted
Backtrace of last 27 frames:
/usr/local/lib/libfreeradius-radius.so(fr_fault+0x114)[0x7fe55bdbb98d]
/usr/local/lib/libfreeradius-server.so(rad_assert_fail+0x46)[0x7fe55c01ec2b]
/usr/local/lib/rlm_eap_teap.so(+0x3446)[0x7fe555f05446]
/usr/local/lib/rlm_eap_teap.so(eap_teap_process+0x23a)[0x7fe555f09d0e]
/usr/local/lib/rlm_eap_teap.so(+0x32a4)[0x7fe555f052a4]
/usr/local/lib/rlm_eap.so(+0x46e4)[0x7fe55918c6e4]
/usr/local/lib/rlm_eap.so(eap_method_select+0x455)[0x7fe55918d0eb]
/usr/local/lib/rlm_eap.so(+0x313d)[0x7fe55918b13d]
radiusd[0x42d652]
radiusd[0x42dd2e]
radiusd[0x42d828]
radiusd[0x42e767]
radiusd(modcall+0xa2)[0x42f4e3]
radiusd(indexed_modcall+0x366)[0x42aa9f]
radiusd(process_authenticate+0x22)[0x42cf34]
radiusd[0x410788]
radiusd(rad_authenticate+0x645)[0x4112d1]
radiusd[0x443309]
radiusd[0x441edb]
radiusd(request_receive+0x9f4)[0x443f11]
radiusd[0x41ab72]
radiusd[0x44bf41]
/usr/local/lib/libfreeradius-radius.so(fr_event_loop+0x574)[0x7fe55bde4729]
radiusd(radius_event_process+0x26)[0x44df37]
radiusd(main+0xd38)[0x435c5b]
/lib64/libc.so.6(__libc_start_main+0xe5)[0x7fe55a4027e5]
radiusd(_start+0x2e)[0x40fa7e]
No panic action set
Aborted (core dumped)

Re: EAP-TEAP not doing 2nd inner Method

Martin B.