Here it is installed : radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf And this is the error : rad_recv: Access-Request packet from host 127.0.0.1 port 57115, id=255, length=115 Service-Type = Framed-User Framed-Protocol = PPP User-Name = "phlander" CHAP-Challenge = 0xf73651aeca5a7c950c9aa1bb7c2717b2c069a238e8 CHAP-Password = 0x73ebd7551d76b3caa221e5b64085a07b1d Calling-Station-Id = "00:42:15:11:24:57" NAS-IP-Address = 10.0.0.1 NAS-Port = 0 WARNING: Empty authorize section. Using default return values. ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 255 to 127.0.0.1 port 57115 Waking up in 4.9 seconds. ----- Original Message ----- From: "Alan Buxey" <A.L.M.Buxey@lboro.ac.uk> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Sent: Tuesday, October 12, 2010 11:20 AM Subject: Re: SQL query error; rejecting user
Hi,
So I did, I deleted everything in / etc / raddb and I configuration, again depending on the requirements there.
check that the raddb directory is the right onw - I seem to recall that one of your logs showed it was /usr/local/etc/raddb/
the default configuration works for basic tests etc - it certainly doesnt have the blank query error that you posted.
alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html