Hi all, Recently had to move free radius 1.1.7 from production server to test/backup server due to failed HD in RAID. config is radius + LDAP and worked fine on the old machine but, on the new machine it works fine when debugging, but not at all when running as a daemon. Output from netstat -l shows that the server is listening on the correct ports on the ('listen'ed) sockets when running as a daemon: [root@nw raddb]# netstat -l | grep radius udp 0 0 nw.4ccompany.com:radius *:* udp 0 0 nw.4ccompany.com:radius *:* udp 0 0 nw.4cco:radius-acct *:* udp 0 0 nw.4cco:radius-acct *:* (doubling up is for lo and eth0) (also tried 'bind_address = *') however output from radtest is: [...] Re-sending Access-Request of id 218 to 192.168.0.16 port 1812 User-Name = "john" User-Password = "removed" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 radclient: no response from server for ID 218 and nothing appearing in radius.log. Using radiusd -X: [root@nw raddb]# radtest john removed 192.168.0.16 0 also_removed Sending Access-Request of id 14 to 192.168.0.16 port 1812 User-Name = "john" User-Password = "removed" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 rad_recv: Access-Accept packet from host 192.168.0.16:1812, id=14, length=20 Tried running in debug as radius:radius and still worked, so it doesn't appear to be a problem with config directory/file ownership. Any suggestions would be greatly appreciated... Best regards, jona.