No error detected (refer below debug logs).. only that radius cannot assign Auth-Type since i do not specify in users file.. I let radius detect by itself... but since in my users file.. there are a few lines that been specified with Auth-Type... it cannot figure it out on its own.. i've a few services refer to different LDAP tree.. So i need to specify the Auth-Type for other services... Any other solution...?? The EAP should follow line with OCE.. but I do not specify any Auth-Type on that line... DEFAULT NAS-Identifier == "Wireless-802.11", Autz-Type := Y5, Auth-Type :=Y5 DEFAULT Realm == "ocemy015.com", Autz-Type := OCE DEFAULT Autz-Type := LDAP, Auth-Type :=LDAP rad_recv: Access-Request packet from host 202.73.10.12:1814, id=20, length=216 Framed-MTU = 1466 NAS-IP-Address = 10.220.0.3 NAS-Identifier = "OCEPOP2" User-Name = "jaroce2@ocemy015.com" Service-Type = Framed-User NAS-Port = 241 NAS-Port-Type = Ethernet NAS-Port-Id = "ether16_241" Called-Station-Id = "00-11-95-dd-31-0a" Calling-Station-Id = "00-11-5b-2d-b2-8e" Connect-Info = "CONNECT Ethernet 2Mbps Full duplex" EAP-Message = 0x02010019016a61726f636532406f63656d793031352e636f6d Message-Authenticator = 0xf66af566c577294fbd2873cf99c82fd6 Proxy-State = 0x32 rad_rmspace_pair: User-Name now 'jaroce2@ocemy015.com' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '/' in User-Name = "jaroce2@ocemy015.com", skipping NULL due to config. modcall[authorize]: module "IPASS" returns noop for request 5 rlm_realm: Looking up realm "ocemy015.com" for User-Name = "jaroce2@ocemy015.com" rlm_realm: Found realm "ocemy015.com" rlm_realm: Adding Stripped-User-Name = "jaroce2" rlm_realm: Proxying request from user jaroce2 to realm ocemy015.com rlm_realm: Adding Realm = "ocemy015.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 1 length 25 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 19 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 Found Autz-Type OCE Processing the authorize section of radiusd.conf modcall: entering group OCE for request 5 rlm_ldap: - authorize rlm_ldap: performing user authorization for jaroce2 radius_xlat: '(uid=jaroce2)' radius_xlat: 'ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 61.6.32.201:389, authentication 0 rlm_ldap: bind as cn=Sysadmin,ou=Applications,dc=jaring,dc=my/kh4l1f4h to 61.6.32.201:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my, with filter (uid=jaroce2) rlm_ldap: checking if remote access for jaroce2 is allowed by dialupAccess rlm_ldap: Added password {CRYPT}$1$ZRXMvi1s$zBQaHYkaxDjGi5zL2geNN0 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFramedCompression as Framed-Compression, value Van-Jacobson-TCP-IP & op=11 rlm_ldap: Adding radiusFramedMTU as Framed-MTU, value 1500 & op=11 rlm_ldap: Adding radiusFramedProtocol as Framed-Protocol, value PPP & op=11 rlm_ldap: Adding radiusServiceType as Service-Type, value Framed-User & op=11 rlm_ldap: user jaroce2 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldapOCE" returns ok for request 5 modcall: leaving group OCE (returns ok) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 Sending Access-Challenge of id 20 to 202.73.10.12 port 1814 Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Framed-Protocol = PPP Service-Type = Framed-User EAP-Message = 0x010200061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6f8d462fc1d7a9ef273cff67a79b9225 Proxy-State = 0x32 Finished request 5 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 202.73.10.12:1814, id=21, length=269 Framed-MTU = 1466 NAS-IP-Address = 10.220.0.3 NAS-Identifier = "OCEPOP2" User-Name = "jaroce2@ocemy015.com" Service-Type = Framed-User NAS-Port = 241 NAS-Port-Type = Ethernet NAS-Port-Id = "ether16_241" Called-Station-Id = "00-11-95-dd-31-0a" Calling-Station-Id = "00-11-5b-2d-b2-8e" Connect-Info = "CONNECT Ethernet 2Mbps Full duplex" State = 0x6f8d462fc1d7a9ef273cff67a79b9225 EAP-Message = 0x0202003c158000000032160301002d01000029030186f82eb5952be3b8ceadc4a4edc478c2c08acc553c7f ee894a2a9361bfdcfbb5000002000a0100 Message-Authenticator = 0x9eabe246450cacd8dfd7f8ab25d623e9 Proxy-State = 0x33 rad_rmspace_pair: User-Name now 'jaroce2@ocemy015.com' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '/' in User-Name = "jaroce2@ocemy015.com", skipping NULL due to config. modcall[authorize]: module "IPASS" returns noop for request 6 rlm_realm: Looking up realm "ocemy015.com" for User-Name = "jaroce2@ocemy015.com" rlm_realm: Found realm "ocemy015.com" rlm_realm: Adding Stripped-User-Name = "jaroce2" rlm_realm: Proxying request from user jaroce2 to realm ocemy015.com rlm_realm: Adding Realm = "ocemy015.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 2 length 60 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry DEFAULT at line 19 modcall[authorize]: module "files" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 Found Autz-Type OCE Processing the authorize section of radiusd.conf modcall: entering group OCE for request 6 rlm_ldap: - authorize rlm_ldap: performing user authorization for jaroce2 radius_xlat: '(uid=jaroce2)' radius_xlat: 'ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my, with filter (uid=jaroce2) rlm_ldap: checking if remote access for jaroce2 is allowed by dialupAccess rlm_ldap: Added password {CRYPT}$1$ZRXMvi1s$zBQaHYkaxDjGi5zL2geNN0 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFramedCompression as Framed-Compression, value Van-Jacobson-TCP-IP & op=11 rlm_ldap: Adding radiusFramedMTU as Framed-MTU, value 1500 & op=11 rlm_ldap: Adding radiusFramedProtocol as Framed-Protocol, value PPP & op=11 rlm_ldap: Adding radiusServiceType as Service-Type, value Framed-User & op=11 rlm_ldap: user jaroce2 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldapOCE" returns ok for request 6 modcall: leaving group OCE (returns ok) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 002d], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 Sending Access-Challenge of id 21 to 202.73.10.12 port 1814 Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Framed-Protocol = PPP Service-Type = Framed-User EAP-Message = 0x0103040a15c0000006f1160301004a02000046030144b70003608201d67571c6b0b8e90af392f94fcfd408 987fb99af1ad06a5a02620e8a88c919eb766ca2a2893ad7e552bd5348071e5638448deb60aa9eb709ccfa6000a0016030106940b000690 00068d0002cd308202c930820232a003020102020102300d06092a864886f70d010104050030819f310b30090603550406130243413111 300f0603550408130850726f76696e63653112301006035504071309536f6d65204369747931153013060355040a130c4f7267616e697a 6174696f6e31123010060355040b13096c6f63616c686f7374311b301906035504031312436c69656e74206365 EAP-Message = 0x7274696669636174653121301f06092a864886f70d0109011612636c69656e74406578616d706c652e636f 6d301e170d3034303132353133323631305a170d3035303132343133323631305a30819b310b30090603550406130243413111300f0603 550408130850726f76696e63653112301006035504071309536f6d65204369747931153013060355040a130c4f7267616e697a6174696f 6e31123010060355040b13096c6f63616c686f73743119301706035504031310526f6f74206365727469666963617465311f301d06092a 864886f70d0109011610726f6f74406578616d706c652e636f6d30819f300d06092a864886f70d010101050003 EAP-Message = 0x818d0030818902818100dac525422bfedb082629a2cba44b3449c90d0ab462fb72c8434a782098863d7eb7 d7e70028c2b7ad555a51cc756cf4fa1d7091615ab450d5289553ae6616aff014a55085d6b8fb4aee98638e426175cdd36c665c63cda177 d34920eb30585edc8773999c2980f81ad4638bbbea1c82d054023db7ef24a3ec1c3f6241a903d7f30203010001a317301530130603551d 25040c300a06082b06010505070301300d06092a864886f70d0101040500038181007a2d921b1cf13bf2982a9178ec9ede6d88edc178a2 e8bd40a0a06fb6f0769957884cd7084537083496fd184165293f583c8e8240eb68e042c94b15752e4c07e80d09 EAP-Message = 0x779afa3dd55c24fa54ac292d77205d1c2477ed30d59f57caf9bd21ff2a8d16cc0911c50e4f295763fcb60e fa3c3d2d0e43850f6e6fbe284902f6e83503650003ba308203b63082031fa003020102020100300d06092a864886f70d01010405003081 9f310b30090603550406130243413111300f0603550408130850726f76696e63653112301006035504071309536f6d6520436974793115 3013060355040a130c4f7267616e697a6174696f6e31123010060355040b13096c6f63616c686f7374311b301906035504031312436c69 656e742063657274696669636174653121301f06092a864886f70d0109011612636c69656e74406578616d706c EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7b50f803a4bf2fad1484ad156677437 Proxy-State = 0x33 Finished request 6 Going to the next request --- Walking the entire request list --- Waking up in 4 seconds... rad_recv: Access-Request packet from host 202.73.10.12:1814, id=22, length=215 Framed-MTU = 1466 NAS-IP-Address = 10.220.0.3 NAS-Identifier = "OCEPOP2" User-Name = "jaroce2@ocemy015.com" Service-Type = Framed-User NAS-Port = 241 NAS-Port-Type = Ethernet NAS-Port-Id = "ether16_241" Called-Station-Id = "00-11-95-dd-31-0a" Calling-Station-Id = "00-11-5b-2d-b2-8e" Connect-Info = "CONNECT Ethernet 2Mbps Full duplex" State = 0xf7b50f803a4bf2fad1484ad156677437 EAP-Message = 0x020300061500 Message-Authenticator = 0x37401c244125eb3618d68d4f8a6414f3 Proxy-State = 0x34 rad_rmspace_pair: User-Name now 'jaroce2@ocemy015.com' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: No '/' in User-Name = "jaroce2@ocemy015.com", skipping NULL due to config. modcall[authorize]: module "IPASS" returns noop for request 7 rlm_realm: Looking up realm "ocemy015.com" for User-Name = "jaroce2@ocemy015.com" rlm_realm: Found realm "ocemy015.com" rlm_realm: Adding Stripped-User-Name = "jaroce2" rlm_realm: Proxying request from user jaroce2 to realm ocemy015.com rlm_realm: Adding Realm = "ocemy015.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 users: Matched entry DEFAULT at line 19 modcall[authorize]: module "files" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 Found Autz-Type OCE Processing the authorize section of radiusd.conf modcall: entering group OCE for request 7 rlm_ldap: - authorize rlm_ldap: performing user authorization for jaroce2 radius_xlat: '(uid=jaroce2)' radius_xlat: 'ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my, with filter (uid=jaroce2) rlm_ldap: checking if remote access for jaroce2 is allowed by dialupAccess rlm_ldap: Added password {CRYPT}$1$ZRXMvi1s$zBQaHYkaxDjGi5zL2geNN0 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFramedCompression as Framed-Compression, value Van-Jacobson-TCP-IP & op=11 rlm_ldap: Adding radiusFramedMTU as Framed-MTU, value 1500 & op=11 rlm_ldap: Adding radiusFramedProtocol as Framed-Protocol, value PPP & op=11 rlm_ldap: Adding radiusServiceType as Service-Type, value Framed-User & op=11 rlm_ldap: user jaroce2 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldapOCE" returns ok for request 7 modcall: leaving group OCE (returns ok) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 7 modcall: leaving group authenticate (returns handled) for request 7 Sending Access-Challenge of id 22 to 202.73.10.12 port 1814 Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Framed-Protocol = PPP Service-Type = Framed-User EAP-Message = 0x010402fb1580000006f1170d3036303132343133323630375a30819f310b30090603550406130243413111 300f0603550408130850726f76696e63653112301006035504071309536f6d65204369747931153013060355040a130c4f7267616e697a 6174696f6e31123010060355040b13096c6f63616c686f7374311b301906035504031312436c69656e7420636572746966696361746531 21301f06092a864886f70d0109011612636c69656e74406578616d706c652e636f6d30819f300d06092a864886f70d010101050003818d 0030818902818100d4c5b19724f164acf1ffb189db1c8fbff4f14396ea7cb1e90f78d69451725377895dfe52cc EAP-Message = 0xb99b41e80ddeb58b127a943f4f58cbc562878192fbdc6fece9f871e7c130d35cf5188817e9b133249edd2a 1c75d31043ae87553cec7a77ef26aa7d74281db9b77e17c6446c5dd9b188b43250ca0229963722a123a726b00b4027fd0203010001a381 ff3081fc301d0603551d0e0416041468d36d3e1ee7bc9d5a057021c363da1365d1ade33081cc0603551d230481c43081c1801468d36d3e 1ee7bc9d5a057021c363da1365d1ade3a181a5a481a230819f310b30090603550406130243413111300f0603550408130850726f76696e 63653112301006035504071309536f6d65204369747931153013060355040a130c4f7267616e697a6174696f6e EAP-Message = 0x31123010060355040b13096c6f63616c686f7374311b301906035504031312436c69656e74206365727469 6669636174653121301f06092a864886f70d0109011612636c69656e74406578616d706c652e636f6d820100300c0603551d1304053003 0101ff300d06092a864886f70d01010405000381810033c00b66b1e579ef73a06798252dab8d5e5511fc00fd276d80d12f834777c6743f dc2743fca1507704e4bc0979e4f60ac3ad9ee83e6f347369229d1f77229ba2e982359da563024a00163dba6d6c986c0bad28af85132ff8 f0d76501bf1b7c2dff658ce1e62c01997b6e64e3e8d4373354ce9912847651539063b85bbc5485c51603010004 EAP-Message = 0x0e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x72dce9b7a77986474ff02c3969a61113 Proxy-State = 0x34 Finished request 7 Going to the next request --- Walking the entire request list --- Waking up in 2 seconds... rad_recv: Access-Request packet from host 202.73.10.12:1814, id=23, length=409 Framed-MTU = 1466 NAS-IP-Address = 10.220.0.3 NAS-Identifier = "OCEPOP2" User-Name = "jaroce2@ocemy015.com" Service-Type = Framed-User NAS-Port = 241 NAS-Port-Type = Ethernet NAS-Port-Id = "ether16_241" Called-Station-Id = "00-11-95-dd-31-0a" Calling-Station-Id = "00-11-5b-2d-b2-8e" Connect-Info = "CONNECT Ethernet 2Mbps Full duplex" State = 0x72dce9b7a77986474ff02c3969a61113 EAP-Message = 0x020400c81580000000be16030100861000008200802341c2779273ae281a27779473d8ed419e99960f32c2 3b1c039a1375aca953a7471fefacd95dc62f99694c5e978848a43c4338f2b3883a8da396d5222ebf2e9167d1ff10e2a894a5a54b04a332 0e01c71942038dbcaa9bc8270e260d0f456c5d2b9263144f7b892ea6b17a0665235eb771455338a6a6d5a4cadba19e5de785a914030100 010116030100282d7702a5c85bb95a5f50397748a82d9704435586553fcfe6dfe21ab12d2ad770675feaa6d109bfe6 Message-Authenticator = 0x13f423390144c1ce2959e3338dd5cddd Proxy-State = 0x35 rad_rmspace_pair: User-Name now 'jaroce2@ocemy015.com' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 modcall[authorize]: module "chap" returns noop for request 8 modcall[authorize]: module "mschap" returns noop for request 8 rlm_realm: No '/' in User-Name = "jaroce2@ocemy015.com", skipping NULL due to config. modcall[authorize]: module "IPASS" returns noop for request 8 rlm_realm: Looking up realm "ocemy015.com" for User-Name = "jaroce2@ocemy015.com" rlm_realm: Found realm "ocemy015.com" rlm_realm: Adding Stripped-User-Name = "jaroce2" rlm_realm: Proxying request from user jaroce2 to realm ocemy015.com rlm_realm: Adding Realm = "ocemy015.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 8 rlm_eap: EAP packet type response id 4 length 200 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 users: Matched entry DEFAULT at line 19 modcall[authorize]: module "files" returns ok for request 8 modcall: leaving group authorize (returns updated) for request 8 Found Autz-Type OCE Processing the authorize section of radiusd.conf modcall: entering group OCE for request 8 rlm_ldap: - authorize rlm_ldap: performing user authorization for jaroce2 radius_xlat: '(uid=jaroce2)' radius_xlat: 'ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my, with filter (uid=jaroce2) rlm_ldap: checking if remote access for jaroce2 is allowed by dialupAccess rlm_ldap: Added password {CRYPT}$1$ZRXMvi1s$zBQaHYkaxDjGi5zL2geNN0 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFramedCompression as Framed-Compression, value Van-Jacobson-TCP-IP & op=11 rlm_ldap: Adding radiusFramedMTU as Framed-MTU, value 1500 & op=11 rlm_ldap: Adding radiusFramedProtocol as Framed-Protocol, value PPP & op=11 rlm_ldap: Adding radiusServiceType as Service-Type, value Framed-User & op=11 rlm_ldap: user jaroce2 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldapOCE" returns ok for request 8 modcall: leaving group OCE (returns ok) for request 8 modcall: leaving group OCE (returns ok) for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 8 modcall: leaving group authenticate (returns handled) for request 8 Sending Access-Challenge of id 23 to 202.73.10.12 port 1814 Framed-Compression = Van-Jacobson-TCP-IP Framed-MTU = 1500 Framed-Protocol = PPP Service-Type = Framed-User EAP-Message = 0x0105003d15800000003314030100010116030100288659a2b78a274b717ac1b8bf139eb525b05a0e9a694b 72e6a4e6ed3c1778505495aa9ee7b32acafb Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5fe274409d7706e1604ff620c6127976 Proxy-State = 0x35 Finished request 8 Going to the next request --- Walking the entire request list --- Cleaning up request 5 ID 20 with timestamp 44b70001 Waking up in 2 seconds... rad_recv: Access-Request packet from host 202.73.10.12:1814, id=24, length=296 Framed-MTU = 1466 NAS-IP-Address = 10.220.0.3 NAS-Identifier = "OCEPOP2" User-Name = "jaroce2@ocemy015.com" Service-Type = Framed-User NAS-Port = 241 NAS-Port-Type = Ethernet NAS-Port-Id = "ether16_241" Called-Station-Id = "00-11-95-dd-31-0a" Calling-Station-Id = "00-11-5b-2d-b2-8e" Connect-Info = "CONNECT Ethernet 2Mbps Full duplex" State = 0x5fe274409d7706e1604ff620c6127976 EAP-Message = 0x0205005715800000004d1703010048b645119ae14f1c156bb2e3b69bd88bb186fc2cf221206ebdcc4ae1cb dcfae0ab7a32d8cac7622c63b8e814905a560d43c8daae1451d22298ba548e2c6321606160affc5f06ebe8c1 Message-Authenticator = 0x9b6c55824f48dfc98d759efe2022f9cc Proxy-State = 0x36 rad_rmspace_pair: User-Name now 'jaroce2@ocemy015.com' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 9 modcall[authorize]: module "preprocess" returns ok for request 9 modcall[authorize]: module "chap" returns noop for request 9 modcall[authorize]: module "mschap" returns noop for request 9 rlm_realm: No '/' in User-Name = "jaroce2@ocemy015.com", skipping NULL due to config. modcall[authorize]: module "IPASS" returns noop for request 9 rlm_realm: Looking up realm "ocemy015.com" for User-Name = "jaroce2@ocemy015.com" rlm_realm: Found realm "ocemy015.com" rlm_realm: Adding Stripped-User-Name = "jaroce2" rlm_realm: Proxying request from user jaroce2 to realm ocemy015.com rlm_realm: Adding Realm = "ocemy015.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 9 rlm_eap: EAP packet type response id 5 length 87 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 9 users: Matched entry DEFAULT at line 19 modcall[authorize]: module "files" returns ok for request 9 modcall: leaving group authorize (returns updated) for request 9 Found Autz-Type OCE Processing the authorize section of radiusd.conf modcall: entering group OCE for request 9 rlm_ldap: - authorize rlm_ldap: performing user authorization for jaroce2 radius_xlat: '(uid=jaroce2)' radius_xlat: 'ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my, with filter (uid=jaroce2) rlm_ldap: checking if remote access for jaroce2 is allowed by dialupAccess rlm_ldap: Added password {CRYPT}$1$ZRXMvi1s$zBQaHYkaxDjGi5zL2geNN0 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFramedCompression as Framed-Compression, value Van-Jacobson-TCP-IP & op=11 rlm_ldap: Adding radiusFramedMTU as Framed-MTU, value 1500 & op=11 rlm_ldap: Adding radiusFramedProtocol as Framed-Protocol, value PPP & op=11 rlm_ldap: Adding radiusServiceType as Service-Type, value Framed-User & op=11 rlm_ldap: user jaroce2 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldapOCE" returns ok for request 9 modcall: leaving group OCE (returns ok) for request 9 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 9 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 eaptls_process returned 7 rlm_eap_ttls: Session established. Proceeding to decode tunneled attributes. Processing the authorize section of radiusd.conf modcall: entering group authorize for request 9 modcall[authorize]: module "preprocess" returns ok for request 9 modcall[authorize]: module "chap" returns noop for request 9 modcall[authorize]: module "mschap" returns noop for request 9 rlm_realm: No '/' in User-Name = "jaroce2@ocemy015.com", skipping NULL due to config. modcall[authorize]: module "IPASS" returns noop for request 9 rlm_realm: Looking up realm "ocemy015.com" for User-Name = "jaroce2@ocemy015.com" rlm_realm: Found realm "ocemy015.com" rlm_realm: Adding Stripped-User-Name = "jaroce2" rlm_realm: Proxying request from user jaroce2 to realm ocemy015.com rlm_realm: Adding Realm = "ocemy015.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 9 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 9 users: Matched entry DEFAULT at line 19 modcall[authorize]: module "files" returns ok for request 9 modcall: leaving group authorize (returns ok) for request 9 Found Autz-Type OCE Processing the authorize section of radiusd.conf modcall: entering group OCE for request 9 rlm_ldap: - authorize rlm_ldap: performing user authorization for jaroce2 radius_xlat: '(uid=jaroce2)' radius_xlat: 'ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=OCE,ou=AAA,ou=People,dc=jaring,dc=my, with filter (uid=jaroce2) rlm_ldap: checking if remote access for jaroce2 is allowed by dialupAccess rlm_ldap: Added password {CRYPT}$1$ZRXMvi1s$zBQaHYkaxDjGi5zL2geNN0 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFramedCompression as Framed-Compression, value Van-Jacobson-TCP-IP & op=11 rlm_ldap: Adding radiusFramedMTU as Framed-MTU, value 1500 & op=11 rlm_ldap: Adding radiusFramedProtocol as Framed-Protocol, value PPP & op=11 rlm_ldap: Adding radiusServiceType as Service-Type, value Framed-User & op=11 rlm_ldap: user jaroce2 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldapOCE" returns ok for request 9 modcall: leaving group OCE (returns ok) for request 9 auth: type Local auth: user supplied User-Password does NOT match local User-Password auth: Failed to validate the user. Login incorrect: [jaroce2@ocemy015.com] (from client localhost port 0) TTLS: Got tunneled Access-Reject rlm_eap: Handler failed in EAP/ttls rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 9 modcall: leaving group authenticate (returns invalid) for request 9 auth: Failed to validate the user. Login incorrect: [jaroce2@ocemy015.com] (from client OCE_JARING port 241 cli 00-11-5b-2d-b2-8e) ----- Original Message ----- From: "Alan DeKok" <aland@nitros9.org> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Sent: Friday, July 14, 2006 1:44 PM Subject: Re: EAP-TTLS-PAP-LDAP
"Rohaizam Abu Bakar" <haizam@myjaring.net> wrote:
Login incorrect: [jaroce2@ocemy015.com] (from client localhost port 0) TTLS: Got tunneled Access-Reject
So.... read the *previous* debug logs to see why it was rejected.
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html