Have you configured that priv level? Only 1 and 15 are configured by default. Ivan Kalik Kalik Informatika ISP Dana 4/3/2008, "David Bell" <David.Bell@dxi.net> piše:
Hi folks, same david Bell, different email address :)
Well I now have RADIUS and Cisco working pretty much as I want.
However it seems to be passing the AVPair stuff back, but the Cisco doesnt seem to recognise it.
Where have I gone wrong.
My Users file has the following
DEFAULT Ldap-Group == "SMC7", Auth-Type := Accept Reply-Message = "You now have level 7 access as part of the SMC Group\n", cisco-avpair = "shell:priv-lvl=7"
When I log in I see freeRADIUS reply with the relevent parts
++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type Accept rad_check_password: Auth-Type = Accept, accepting the user Login OK: [bob/pass1] (from client 212.95.252.0/24 port 0) Sending Access-Accept of id 10 to 212.95.252.25 port 39111 Reply-Message = "You now have level 7 access as part of the SMC Group\n" Cisco-AVPair = "shell:priv-lvl=7" Finished request 0. Going to the next request Waking up in 0.9 seconds. Waking up in 4.0 seconds. Cleaning up request 0 ID 10 with timestamp +7 Ready to process requests.
With verbose RADIUS debugging on the Cisco
Username: bob Password: You now have level 7 access as part of the SMC Group
Switch> 16:10:20: RADIUS: Pick NAS IP for u=0x3C8D5F8 tableid=0 cfg_addr=0.0.00 16:10:20: RADIUS: ustruct sharecount=1 16:10:20: Radius: radius_port_info() success=1 radius_nas_port=1 16:10:20: RADIUS: added cisco VSA 2 len 4 "tty0" 16:10:20: RADIUS: Received from id 1645/10 212.95.255.242:1812, Access-Accept, len 99 16:10:20: RADIUS: saved authorization data for user 3C8D5F8 at 3CD2348
When I ask the cisco for the current privilege level
Switch>show priv Current privilege level is 1
Anyone got any pointers?
David
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html