AD Authentication + radius + foundryAP

16 May 2011

      I followed the guide that was linked from http://wiki.freeradius.org/FreeRADIUS_Active_Directory_Integration_HOWTO because I'm running v2 of the radius server.

After going to the guide I was still unable to authenticate to the AD though the wireless AP controller.  This radius is running on Ubuntu 10.04 and is supposed to replace a free radius controller running v1 on Gentoo.  The one running on Gentoo is working for the most part, just dies from time to time.  So we are just upgrading and refreshing.

For some reason I have not been able to get the radius server to do what I need it to do and that is work with MS-CHAP so that it will authenticate to AD.

FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan  5 2010 at 02:49:11
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/var/run/rad2/rad2.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = no
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        nastype = "other"
 }
 client foundryap {
        ipaddr = 192.168.103.10
        require_message_authenticator = no
        secret = "testing123"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
        encryption_scheme = "auto"
        auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
        use_mppe = yes
        require_encryption = yes
        require_strong = yes
        with_ntdomain_hack = yes
        ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-ATL.EXAMPLE.COM} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00} --require-membership-of=ATL+wifi-secure"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
        default_eap_type = "peap"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 4096
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
    gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        pem_file_type = yes
        private_key_file = "/etc/freeradius/certs/server.key"
        certificate_file = "/etc/freeradius/certs/server.pem"
        CA_file = "/etc/freeradius/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/etc/freeradius/certs/dh"
        random_file = "/etc/freeradius/certs/random"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
        make_cert_command = "/etc/freeradius/certs/bootstrap"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = yes
        use_tunneled_reply = yes
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
        with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
        huntgroups = "/etc/freeradius/huntgroups"
        hints = "/etc/freeradius/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = yes
  }
 Module: Instantiating ntdomain
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = yes
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
        usersfile = "/etc/freeradius/users"
        acctusersfile = "/etc/freeradius/acct_users"
        preproxy_usersfile = "/etc/freeradius/preproxy_users"
        compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
        attrsfile = "/etc/freeradius/attrs.access_reject"
        key = "%{User-Name}"
  }
 } # modules
} # server
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pam
 Module: Instantiating pam
  pam {
        pam_auth = "radiusd"
  }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating auth_log
  detail auth_log {
        detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating acct_unique
  acct_unique {
        key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Instantiating detail
  detail {
        detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
 Module: Instantiating attr_filter.accounting_response
  attr_filter attr_filter.accounting_response {
        attrsfile = "/etc/freeradius/attrs.accounting_response"
        key = "%{User-Name}"
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 1812
}
listen {
        type = "acct"
        ipaddr = *
        port = 1813
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.

rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=83, length=158
        User-Name = "ATL\\user"
        NAS-IP-Address = 192.168.103.10
        NAS-Port = 6145
        Called-Station-Id = "00-90-0B-0A-81-96:radtest"
        Calling-Station-Id = "00-26-C7-6F-FF-64"
        Framed-MTU = 900
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 802.11g"
        EAP-Message = 0x020100110141544c5c7069706b696e5f6d
        Message-Authenticator = 0xf18704d104d0322078509df754b74003
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log]      expand: %t -> Mon May 16 15:28:41 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 1 length 17
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 83 to 192.168.103.10 port 32890
        EAP-Message = 0x010200061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x880bd1788809c8ca896d5b23fad51f0e
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=84, length=296
        User-Name = "ATL\\user"
        NAS-IP-Address = 192.168.103.10
        NAS-Port = 6145
        Called-Station-Id = "00-90-0B-0A-81-96:radtest"
        Calling-Station-Id = "00-26-C7-6F-FF-64"
        Framed-MTU = 900
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 802.11g"
        EAP-Message = 0x0202008919800000007f160301007a0100007603014dd17b10f62607c3d64b96e5d9505d0180e01cb5bd8d86d43136a93b0805404a209e83189d67298bccdaa3ebde678430bac0f21f8fc6ae3786aa1efaadf9822f110018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100
        State = 0x880bd1788809c8ca896d5b23fad51f0e
        Message-Authenticator = 0x013e8d6954e859caabbe5767cb033984
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log]      expand: %t -> Mon May 16 15:28:41 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 2 length 137
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 127
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 007a], ClientHello
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 01c3], Certificate
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 84 to 192.168.103.10 port 32890
        EAP-Message = 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
        EAP-Message = 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
        EAP-Message = 0x3336e1804d16833ff8b416030100040e000000
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x880bd1788908c8ca896d5b23fad51f0e
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=85, length=165
        User-Name = "ATL\\user"
        NAS-IP-Address = 192.168.103.10
        NAS-Port = 6145
        Called-Station-Id = "00-90-0B-0A-81-96:radtest"
        Calling-Station-Id = "00-26-C7-6F-FF-64"
        Framed-MTU = 900
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 802.11g"
        EAP-Message = 0x020300061900
        State = 0x880bd1788908c8ca896d5b23fad51f0e
        Message-Authenticator = 0xada9d2724210731e12da1c6d2f3f0926
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log]      expand: %t -> Mon May 16 15:28:41 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 85 to 192.168.103.10 port 32890
        EAP-Message = 0x010400061900
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x880bd1788a0fc8ca896d5b23fad51f0e
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED
Waking up in 4.3 seconds.
Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED
Waking up in 3.8 seconds.
Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED
Waking up in 3.6 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=88, length=158
        User-Name = "ATL\\user"
        NAS-IP-Address = 192.168.103.10
        NAS-Port = 6145
        Called-Station-Id = "00-90-0B-0A-81-96:radtest"
        Calling-Station-Id = "00-26-C7-6F-FF-64"
        Framed-MTU = 900
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 802.11g"
        EAP-Message = 0x020100110141544c5c7069706b696e5f6d
        Message-Authenticator = 0x26e0f9d13ab7787bf244db77d342326d
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log]      expand: %t -> Mon May 16 15:28:43 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 1 length 17
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 88 to 192.168.103.10 port 32890
        EAP-Message = 0x010200061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x457c467c457e5f9ed7afaf432a46c660
Finished request 3.
Going to the next request
Waking up in 3.6 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=89, length=165
        User-Name = "ATL\\user"
        NAS-IP-Address = 192.168.103.10
        NAS-Port = 6145
        Called-Station-Id = "00-90-0B-0A-81-96:radtest"
        Calling-Station-Id = "00-26-C7-6F-FF-64"
        Framed-MTU = 900
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 802.11g"
        EAP-Message = 0x020200060311
        State = 0x457c467c457e5f9ed7afaf432a46c660
        Message-Authenticator = 0xad2eebc61c93e9f242fc51bf2dafe2c0
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log]      expand: %t -> Mon May 16 15:28:43 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/leap
[eap] processing type leap
  rlm_eap_leap: Stage 2
  rlm_eap_leap: Issuing AP Challenge
  rlm_eap_leap: Successfully initiated
++[eap] returns handled
Sending Access-Challenge of id 89 to 192.168.103.10 port 32890
        EAP-Message = 0x0103001c11010008765dcad2513ca14941544c5c7069706b696e5f6d
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x457c467c447f579ed7afaf432a46c660
Finished request 4.
Going to the next request
Waking up in 3.6 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=90, length=203
        User-Name = "ATL\\user"
        NAS-IP-Address = 192.168.103.10
        NAS-Port = 6145
        Called-Station-Id = "00-90-0B-0A-81-96:radtest"
        Calling-Station-Id = "00-26-C7-6F-FF-64"
        Framed-MTU = 900
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 802.11g"
        EAP-Message = 0x0203002c1101001887b03ee7af25d8731fec4765958f0f4b0775fd12760ca7a341544c5c7069706b696e5f6d
        State = 0x457c467c447f579ed7afaf432a46c660
        Message-Authenticator = 0xcc373dbaa966a554c5a5a842877f7fed
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log]      expand: %t -> Mon May 16 15:28:43 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 3 length 44
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/leap
[eap] processing type leap
rlm_eap_leap: No Cleartext-Password or NT-Password configured for this user
[eap] Handler failed in EAP/leap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> ATL\user
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 5 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 5
Sending Access-Reject of id 90 to 192.168.103.10 port 32890
        EAP-Message = 0x04030004
        Message-Authenticator = 0x00000000000000000000000000000000

Flame on!

Seriously though.. I'm going to keep working at this, just didn't know if someone would be able to help me out.

Thanks.

Mark PIpkin
Systems Administrator
Air2Web
Office:  +1 404 942 5365
E-mail:  mark.pipkin@air2web.com

Mobilize your business.
Find out how at www.air2web.com
Follow us on Twitter @a2wmobile

This message contains privileged and confidential information.  If received in error, please delete immediately.

AD Authentication + radius + foundryAP

Mark Pipkin