Hi! I've deleted the old /sbin /bin /raddb dirs and then i've executed make install in the freerad 2.0.5 dir... So what is the fastest and the cleanest way to remove the old version? Usually I use packages but I've had problems running radiusd when installing from them... Thanks and sorry for my lame eng. On Fri, 11 Jul 2008 19:30:26 +0100, "Ivan Kalik" <tnt@kalik.net> wrote:
You probably have two instances of the server installed. These files don't belong to the server that is running.
Ivan Kalik Kalik Informatika ISP
Dana 11/7/2008, "Maciej Drobniuch" <maciej@drobniuch.pl> piše:
Hi!
radtest fred somepass localhost 1813 somesecret Sending Access-Request of id 102 to 127.0.0.1 port 1812 User-Name = "fred" User-Password = "somepass" NAS-IP-Address = 127.0.0.1 NAS-Port = 1813 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=102, length=20 rad_verify: Received Access-Reject packet from client 127.0.0.1 port 1812 with invalid signature (err=2)! (Shared secret is incorrect.)
radiusd -X rad_recv: Access-Request packet from host 127.0.0.1 port 32770, id=102, length=56 User-Name = "fred" User-Password = "h\347`\005\270\202\336<\336i~e\031\r\021[" NAS-IP-Address = 127.0.0.1 NAS-Port = 1813 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "fred", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. WARNING: Unprintable characters in the password. Double-check
the
shared secret on the server and the NAS! Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> fred attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Sending Access-Reject of id 102 to 127.0.0.1 port 32770 Finished request 2. Going to the next request Waking up in 4.9 seconds. Cleaning up request 2 ID 102 with timestamp +151 Ready to process requests.
cat client.conf client 127.0.0.1 { secret = somesecret shortname = localhost nastype = other }
cat users fred Cleartext-Password =="somepass" Service-Type = Framed-User, Framed-Protocol = PPP
wilma Auth-Type := CHAP, User-password =="somepass" Service-Type = Framed-User, Framed-Protocol = PPP
barney Auth-Type := MS-CHAP, User-Password == "somepass" Service-Type = Framed-User, Framed-Protocol = PPP
What's wrong with this line >User-Password = "h\347`\005\270\202\336<\336i~e\031\r\021[" ??? Thanks for the support!
-- ------------------------ Maciej Drobniuch
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html --
Maciej Drobniuch