That is what I am doing, however they append to the current line, I would like to put a linebreak at the end of each one to make them flow properly David
You most likely want operator += to add multiple attributes with the same name.
http://wiki.freeradius.org/Operators
Ivan Kalik Kalik Informatika ISP
Dana 20/2/2008, "David W Bell" <david@chaoscrypt.com> piše:
yep - tried that :)
Hi David,
Have you tried putting "\n" to see if that puts a line break into the response? Whether the RADIUS client will barf on that is another matter ;-)
Rgds,
Guy
On 20/02/2008, David W Bell <david@chaoscrypt.com> wrote:
David W Bell wrote:
Thanks for the info so far.
Is there a howto on getting this to work?
Questions I still have on this are.
1) Do I need to extend my Schema to include "Cisco-AV-Pair" if so is there an example I can copy
2) What is the exact line that I need to add to my ldap.attrmap file to then refer to that
Can this then be expanded to Group Memberships?
The situation I want is for User David, who is a member of the Edge_Router group to have full access to the routers for that group, while having, say, level 6 access to the core routers from membership of the Core_Router group
Thanks for any further help
David - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Seem to have managed to get a bit further.
Is there any way of adding a line-break to a Radius-Reply string?
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html