well, cp -v is not same as ln -s (command) :) try setting selinux to permissive mode first. Eero 2017-10-25 21:01 GMT+03:00 Andrew Meyer via Freeradius-Users < freeradius-users@lists.freeradius.org>:
Ok, in doing more reading I have made a symbolic link for the default config: cp -v /etc/raddb/sites-available/default /etc/raddb/sites-enabled/
It then started to complain about not having the authentication modules. So I start to copy those over as well.
I think I'm heading in the right direction. (Also had to allow freeradius through SELinux)
Here is the latest i'm seeing in my logs: Wed Oct 25 10:42:09 2017 : Error: rlm_eap_tls: Failed initializing SSL context Wed Oct 25 10:42:09 2017 : Error: rlm_eap (EAP): Failed to initialise rlm_eap_tls Wed Oct 25 10:42:09 2017 : Error: /etc/raddb/mods-enabled/eap[14]: Instantiation failed for module "eap"
On Wednesday, October 25, 2017 8:30 AM, Andrew Meyer via Freeradius-Users <freeradius-users@lists.freeradius.org> wrote:
Alan, My apologies. Yahoo defaults to Rich Text and there is no way to set the default to plain text that I can see. However here is my output in plain text. Hope this is legible now.
So I also added a client config and told it to allow my network to have the ability to communicate w/ FreeRADIUS. Tue Oct 24 21:17:58 2017 : Auth: (0) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [bob/hello] (from client ASM port 0) Tue Oct 24 21:18:04 2017 : Auth: (1) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [bob/hello] (from client ASM port 0)
On Wednesday, October 25, 2017 5:31 AM, Alan DeKok < aland@deployingradius.com> wrote:
On Oct 24, 2017, at 9:27 PM, Andrew Meyer via Freeradius-Users < freeradius-users@lists.freeradius.org> wrote:
Ok, I did what you said, I started fresh. The only thing I have put in the /etc/raddb/radiusd.conf is a listen directive. So now in the logs i'm getting this: Tue Oct 24 20:26:54 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udpTue Oct 24 20:26:59 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udpTue Oct 24 20:27:04 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udp]
You've been told repeatedly to fix your messages so that the contents aren't mangled. Despite that, you're still not following instructions.
If you don't care enough to post READABLE logs, I don't care to answer your questions.
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html