FreeRadius experts, We are trying to run FreeRadius on a RedHat AS 2.1 system. We use an external password file for authentication defined in the unix system (password = filename) section of radius.conf. This seems to work fine. Modem users can authenticate to our old 3com Total Control modem pool, but users can not access the Internet. They can access all local domain servers on campus, but they can't get off campus. This really should not be a firewall issue as the same ip addresses are still associated with the modem pool. Note: if we go back to our old Lucent Technology radius server running on AIX, everybody is fine and can access the Internet again. I am trying to find out what might cause a modem pool to only work locally (access servers on our campus) after switching to FreeRadius particularly since it seems that the authentication part is working? I know that the 3com Total Control modem pool is rather old but I don't know why it would behave differently from one radius server to another as long as authentication works. I read in one of the FreeRadius archives that some users have experienced a similar problem of either very slow or won't work at all for some customers accessing the Internet via Freeradius authentication until they modified the MTU setting. This is curious to me. Is there a place in FreeRadius that I might change the mtu setting given that I am using an external unix password crypt file for all authentication? If so, what mtu setting might be recommended? Is there another possible explanation that might relate to Freeradius? any thoughts are much appreciated? Tim Tyler Network Engineer - Beloit College tyler@beloit.edu