On freeradius-1.0.4-1.FC4.1 come with fedora core 4. I want to authorize either UNIX user (/etc/passwd/) or LDAP user. /etc/raddb/users file is: DEFAULT Auth-Type = System Fall-Through = 1 I success with both LDAP user and UNIX user with /etc/raddb/radiusd.conf is: authorize { ldap files } Then I change the order in /etc/raddb/radiusd.conf to: authorize { files ldap } only UNIX user is be accept, but LDAP user is be reject. My sample radtest: radtest myuser mypassword localhost 0 testing123 My sample radius-x output: rad_recv: Access-Request packet from host 127.0.0.1:32775, id=165, length=56 User-Name = "myuser" User-Password = "mypassword" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for demo rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user demo authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rad_recv: Access-Request packet from host 127.0.0.1:32775, id=165, length=56 Sending Access-Reject of id 165 to 127.0.0.1:32775 I wondor that after files modules failed, why not try LDAP modules? Do I need more config? Thanks for all help. --Wipat ----------------------------------------- This email was sent using SquirrelMail. https://front.psu.ac.th/ -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.