Alan, here is full (sorry for that) output of "radiusd -X" test during which an attempt was unsuccessfull again with tls cache disabled. As you can see below, there is not TLS-Client-Cert-Common-Name in the output so the check-eap-tls fails. radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Mar 5 2015 at 23:41:36 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/dynamic_clients including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/dhcp including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/check-eap-tls including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 64 idle_timeout = 30 } } client wlc2504 { ipaddr = 172.16.0.20 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" virtual_server = "check-eap-tls" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-RSA-CAMELLIA128-SHA" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 name = "EAP module" } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:215 Cistron compatibility checks for entry testuser ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:215 Cistron compatibility checks for entry testuser ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server check-eap-tls { # from file /etc/raddb/sites-enabled/check-eap-tls # Loading authorize {...} } # server check-eap-tls server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address :: port 1812 as server default Listening on acct address :: port 1813 as server default Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 47703 Ready to process requests Received Access-Request Id 194 from 172.16.0.20:32769 to 172.16.110.17:1812 length 269 User-Name = 'mib@example.cz' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '20-10-7a-01-c1-80' Called-Station-Id = 'd0-c2-82-e0-cb-80' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' NAS-IP-Address = 172.16.0.20 NAS-Identifier = 'wlc' Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '200' EAP-Message = 0x02010014016d696240616c696e766573742e637a Message-Authenticator = 0x1bab59fd5ca9faa4fa61fb1e92a22ef0 (0) Received Access-Request packet from host 172.16.0.20 port 32769, id=194, length=269 (0) User-Name = 'mib@example.cz' (0) Chargeable-User-Identity = 0x00 (0) Location-Capable = Civix-Location (0) Calling-Station-Id = '20-10-7a-01-c1-80' (0) Called-Station-Id = 'd0-c2-82-e0-cb-80' (0) NAS-Port = 1 (0) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' (0) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' (0) NAS-IP-Address = 172.16.0.20 (0) NAS-Identifier = 'wlc' (0) Airespace-Wlan-Id = 3 (0) Service-Type = Framed-User (0) Framed-MTU = 1300 (0) NAS-Port-Type = Wireless-802.11 (0) Tunnel-Type:0 = VLAN (0) Tunnel-Medium-Type:0 = IEEE-802 (0) Tunnel-Private-Group-Id:0 = '200' (0) EAP-Message = 0x02010014016d696240616c696e766573742e637a (0) Message-Authenticator = 0x1bab59fd5ca9faa4fa61fb1e92a22ef0 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) filter_username filter_username { (0) if (!&User-Name) (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\\.$/) (0) if (&User-Name =~ /\\.$/) -> FALSE (0) if (&User-Name =~ /@\\./) (0) if (&User-Name =~ /@\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix : Checking for suffix after "@" (0) suffix : Looking up realm "example.cz" for User-Name = "mib@example.cz" (0) suffix : No such realm "example.cz" (0) [suffix] = noop (0) eap : Peer sent code Response (2) ID 1 length 20 (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap : Peer sent method Identity (1) (0) eap : Calling eap_tls to process EAP data (0) eap_tls : Requiring client certificate (0) eap_tls : Initiate (0) eap_tls : Requiring client certificate (0) eap_tls : Start returned 1 (0) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9ffd2e86 (0) [eap] = handled (0) } # authenticate = handled (0) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=194, length=0 (0) EAP-Message = 0x010200060d20 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x9fff236a9ffd2e86923483cd2cba31b1 Sending Access-Challenge Id 194 from 172.16.110.17:1812 to 172.16.0.20:32769 EAP-Message = 0x010200060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9fff236a9ffd2e86923483cd2cba31b1 (0) Finished request Waking up in 0.3 seconds. Received Access-Request Id 195 from 172.16.0.20:32769 to 172.16.110.17:1812 length 374 User-Name = 'mib@example.cz' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '20-10-7a-01-c1-80' Called-Station-Id = 'd0-c2-82-e0-cb-80' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' NAS-IP-Address = 172.16.0.20 NAS-Identifier = 'wlc' Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '200' EAP-Message = 0x0202006b0d8000000061160301005c01000058030156632be3cd7be1024baf6a80d10cb073231da2b3505481eb9db66a806656828b000018c014c013c00ac0090035002f00380032000a00130005000401000017000a00080006001900170018000b00020100ff01000100 State = 0x9fff236a9ffd2e86923483cd2cba31b1 Message-Authenticator = 0xb73eb59476ea43f1e2a4302781dfd8e0 (1) Received Access-Request packet from host 172.16.0.20 port 32769, id=195, length=374 (1) User-Name = 'mib@example.cz' (1) Chargeable-User-Identity = 0x00 (1) Location-Capable = Civix-Location (1) Calling-Station-Id = '20-10-7a-01-c1-80' (1) Called-Station-Id = 'd0-c2-82-e0-cb-80' (1) NAS-Port = 1 (1) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' (1) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' (1) NAS-IP-Address = 172.16.0.20 (1) NAS-Identifier = 'wlc' (1) Airespace-Wlan-Id = 3 (1) Service-Type = Framed-User (1) Framed-MTU = 1300 (1) NAS-Port-Type = Wireless-802.11 (1) Tunnel-Type:0 = VLAN (1) Tunnel-Medium-Type:0 = IEEE-802 (1) Tunnel-Private-Group-Id:0 = '200' (1) EAP-Message = 0x0202006b0d8000000061160301005c01000058030156632be3cd7be1024baf6a80d10cb073231da2b3505481eb9db66a806656828b000018c014c013c00ac0090035002f00380032000a00130005000401000017000a00080006001900170018000b00020100ff01000100 (1) State = 0x9fff236a9ffd2e86923483cd2cba31b1 (1) Message-Authenticator = 0xb73eb59476ea43f1e2a4302781dfd8e0 (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) filter_username filter_username { (1) if (!&User-Name) (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\\.\\./ ) (1) if (&User-Name =~ /\\.\\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\\.$/) (1) if (&User-Name =~ /\\.$/) -> FALSE (1) if (&User-Name =~ /@\\./) (1) if (&User-Name =~ /@\\./) -> FALSE (1) } # filter_username filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix : Checking for suffix after "@" (1) suffix : Looking up realm "example.cz" for User-Name = "mib@example.cz" (1) suffix : No such realm "example.cz" (1) [suffix] = noop (1) eap : Peer sent code Response (2) ID 2 length 107 (1) eap : No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = EAP (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap : Expiring EAP session with state 0x9fff236a9ffd2e86 (1) eap : Finished EAP session with state 0x9fff236a9ffd2e86 (1) eap : Previous EAP request found for state 0x9fff236a9ffd2e86, released from the list (1) eap : Peer sent method TLS (13) (1) eap : EAP TLS (13) (1) eap : Calling eap_tls to process EAP data (1) eap_tls : Authenticate (1) eap_tls : processing EAP-TLS TLS Length 97 (1) eap_tls : Length Included (1) eap_tls : eaptls_verify returned 11 (1) eap_tls : (other): before/accept initialization (1) eap_tls : TLS_accept: before/accept initialization (1) eap_tls : <<< TLS 1.0 Handshake [length 005c], ClientHello (1) eap_tls : TLS_accept: SSLv3 read client hello A (1) eap_tls : >>> TLS 1.0 Handshake [length 0039], ServerHello (1) eap_tls : TLS_accept: SSLv3 write server hello A (1) eap_tls : >>> TLS 1.0 Handshake [length 0909], Certificate (1) eap_tls : TLS_accept: SSLv3 write certificate A (1) eap_tls : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_tls : TLS_accept: SSLv3 write key exchange A (1) eap_tls : >>> TLS 1.0 Handshake [length 00b2], CertificateRequest (1) eap_tls : TLS_accept: SSLv3 write certificate request A (1) eap_tls : TLS_accept: SSLv3 flush data (1) eap_tls : TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (1) eap_tls : eaptls_process returned 13 (1) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9efc2e86 (1) [eap] = handled (1) } # authenticate = handled (1) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=195, length=0 (1) EAP-Message = 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 2f01a15eabedcb01c483a08963b50e6f28951 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x9fff236a9efc2e86923483cd2cba31b1 Sending Access-Challenge Id 195 from 172.16.110.17:1812 to 172.16.0.20:32769 EAP-Message = 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 a15eabedcb01c483a08963b50e6f2895 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9fff236a9efc2e86923483cd2cba31b1 (1) Finished request Waking up in 0.3 seconds. Received Access-Request Id 196 from 172.16.0.20:32769 to 172.16.110.17:1812 length 273 User-Name = 'mib@example.cz' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '20-10-7a-01-c1-80' Called-Station-Id = 'd0-c2-82-e0-cb-80' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' NAS-IP-Address = 172.16.0.20 NAS-Identifier = 'wlc' Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '200' EAP-Message = 0x020300060d00 State = 0x9fff236a9efc2e86923483cd2cba31b1 Message-Authenticator = 0x938805f4ed9b8f3b92a739a3a7e2f639 (2) Received Access-Request packet from host 172.16.0.20 port 32769, id=196, length=273 (2) User-Name = 'mib@example.cz' (2) Chargeable-User-Identity = 0x00 (2) Location-Capable = Civix-Location (2) Calling-Station-Id = '20-10-7a-01-c1-80' (2) Called-Station-Id = 'd0-c2-82-e0-cb-80' (2) NAS-Port = 1 (2) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' (2) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' (2) NAS-IP-Address = 172.16.0.20 (2) NAS-Identifier = 'wlc' (2) Airespace-Wlan-Id = 3 (2) Service-Type = Framed-User (2) Framed-MTU = 1300 (2) NAS-Port-Type = Wireless-802.11 (2) Tunnel-Type:0 = VLAN (2) Tunnel-Medium-Type:0 = IEEE-802 (2) Tunnel-Private-Group-Id:0 = '200' (2) EAP-Message = 0x020300060d00 (2) State = 0x9fff236a9efc2e86923483cd2cba31b1 (2) Message-Authenticator = 0x938805f4ed9b8f3b92a739a3a7e2f639 (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) filter_username filter_username { (2) if (!&User-Name) (2) if (!&User-Name) -> FALSE (2) if (&User-Name =~ / /) (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@.*@/ ) (2) if (&User-Name =~ /@.*@/ ) -> FALSE (2) if (&User-Name =~ /\\.\\./ ) (2) if (&User-Name =~ /\\.\\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\\.$/) (2) if (&User-Name =~ /\\.$/) -> FALSE (2) if (&User-Name =~ /@\\./) (2) if (&User-Name =~ /@\\./) -> FALSE (2) } # filter_username filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix : Checking for suffix after "@" (2) suffix : Looking up realm "example.cz" for User-Name = "mib@example.cz" (2) suffix : No such realm "example.cz" (2) [suffix] = noop (2) eap : Peer sent code Response (2) ID 3 length 6 (2) eap : No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) [files] = noop (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = EAP (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap : Expiring EAP session with state 0x9fff236a9efc2e86 (2) eap : Finished EAP session with state 0x9fff236a9efc2e86 (2) eap : Previous EAP request found for state 0x9fff236a9efc2e86, released from the list (2) eap : Peer sent method TLS (13) (2) eap : EAP TLS (13) (2) eap : Calling eap_tls to process EAP data (2) eap_tls : Authenticate (2) eap_tls : processing EAP-TLS (2) eap_tls : Received TLS ACK (2) eap_tls : Received TLS ACK (2) eap_tls : ACK handshake fragment handler (2) eap_tls : eaptls_verify returned 1 (2) eap_tls : eaptls_process returned 13 (2) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9dfb2e86 (2) [eap] = handled (2) } # authenticate = handled (2) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=196, length=0 (2) EAP-Message = 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 122300d06092a864886f70d01010105000382 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x9fff236a9dfb2e86923483cd2cba31b1 Sending Access-Challenge Id 196 from 172.16.110.17:1812 to 172.16.0.20:32769 EAP-Message = 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 00d06092a864886f70d0101010500038 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9fff236a9dfb2e86923483cd2cba31b1 (2) Finished request Waking up in 0.3 seconds. Received Access-Request Id 197 from 172.16.0.20:32769 to 172.16.110.17:1812 length 273 User-Name = 'mib@example.cz' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '20-10-7a-01-c1-80' Called-Station-Id = 'd0-c2-82-e0-cb-80' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' NAS-IP-Address = 172.16.0.20 NAS-Identifier = 'wlc' Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '200' EAP-Message = 0x020400060d00 State = 0x9fff236a9dfb2e86923483cd2cba31b1 Message-Authenticator = 0x0db3c750734a94c54375e9219c8db678 (3) Received Access-Request packet from host 172.16.0.20 port 32769, id=197, length=273 (3) User-Name = 'mib@example.cz' (3) Chargeable-User-Identity = 0x00 (3) Location-Capable = Civix-Location (3) Calling-Station-Id = '20-10-7a-01-c1-80' (3) Called-Station-Id = 'd0-c2-82-e0-cb-80' (3) NAS-Port = 1 (3) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' (3) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' (3) NAS-IP-Address = 172.16.0.20 (3) NAS-Identifier = 'wlc' (3) Airespace-Wlan-Id = 3 (3) Service-Type = Framed-User (3) Framed-MTU = 1300 (3) NAS-Port-Type = Wireless-802.11 (3) Tunnel-Type:0 = VLAN (3) Tunnel-Medium-Type:0 = IEEE-802 (3) Tunnel-Private-Group-Id:0 = '200' (3) EAP-Message = 0x020400060d00 (3) State = 0x9fff236a9dfb2e86923483cd2cba31b1 (3) Message-Authenticator = 0x0db3c750734a94c54375e9219c8db678 (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) filter_username filter_username { (3) if (!&User-Name) (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\\.\\./ ) (3) if (&User-Name =~ /\\.\\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\\.$/) (3) if (&User-Name =~ /\\.$/) -> FALSE (3) if (&User-Name =~ /@\\./) (3) if (&User-Name =~ /@\\./) -> FALSE (3) } # filter_username filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix : Checking for suffix after "@" (3) suffix : Looking up realm "example.cz" for User-Name = "mib@example.cz" (3) suffix : No such realm "example.cz" (3) [suffix] = noop (3) eap : Peer sent code Response (2) ID 4 length 6 (3) eap : No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) [files] = noop (3) [expiration] = noop (3) [logintime] = noop (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = EAP (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap : Expiring EAP session with state 0x9fff236a9dfb2e86 (3) eap : Finished EAP session with state 0x9fff236a9dfb2e86 (3) eap : Previous EAP request found for state 0x9fff236a9dfb2e86, released from the list (3) eap : Peer sent method TLS (13) (3) eap : EAP TLS (13) (3) eap : Calling eap_tls to process EAP data (3) eap_tls : Authenticate (3) eap_tls : processing EAP-TLS (3) eap_tls : Received TLS ACK (3) eap_tls : Received TLS ACK (3) eap_tls : ACK handshake fragment handler (3) eap_tls : eaptls_verify returned 1 (3) eap_tls : eaptls_process returned 13 (3) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9cfa2e86 (3) [eap] = handled (3) } # authenticate = handled (3) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=197, length=0 (3) EAP-Message = 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 1639f71f57ade5862b9dc8ade01113380c4bb (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x9fff236a9cfa2e86923483cd2cba31b1 Sending Access-Challenge Id 197 from 172.16.110.17:1812 to 172.16.0.20:32769 EAP-Message = 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 f71f57ade5862b9dc8ade01113380c4b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9fff236a9cfa2e86923483cd2cba31b1 (3) Finished request Waking up in 0.2 seconds. Received Access-Request Id 198 from 172.16.0.20:32769 to 172.16.110.17:1812 length 1701 User-Name = 'mib@example.cz' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '20-10-7a-01-c1-80' Called-Station-Id = 'd0-c2-82-e0-cb-80' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' NAS-IP-Address = 172.16.0.20 NAS-Identifier = 'wlc' Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '200' EAP-Message = 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 b26256ecfafcdcb0ffca2cb6bc5848ca State = 0x9fff236a9cfa2e86923483cd2cba31b1 Message-Authenticator = 0x9baeed985e6260828cc3be11bb79931d (4) Received Access-Request packet from host 172.16.0.20 port 32769, id=198, length=1701 (4) User-Name = 'mib@example.cz' (4) Chargeable-User-Identity = 0x00 (4) Location-Capable = Civix-Location (4) Calling-Station-Id = '20-10-7a-01-c1-80' (4) Called-Station-Id = 'd0-c2-82-e0-cb-80' (4) NAS-Port = 1 (4) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' (4) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' (4) NAS-IP-Address = 172.16.0.20 (4) NAS-Identifier = 'wlc' (4) Airespace-Wlan-Id = 3 (4) Service-Type = Framed-User (4) Framed-MTU = 1300 (4) NAS-Port-Type = Wireless-802.11 (4) Tunnel-Type:0 = VLAN (4) Tunnel-Medium-Type:0 = IEEE-802 (4) Tunnel-Private-Group-Id:0 = '200' (4) EAP-Message = 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 6459b26256ecfafcdcb0ffca2cb6bc5848ca3 (4) State = 0x9fff236a9cfa2e86923483cd2cba31b1 (4) Message-Authenticator = 0x9baeed985e6260828cc3be11bb79931d (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) filter_username filter_username { (4) if (!&User-Name) (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\\.\\./ ) (4) if (&User-Name =~ /\\.\\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\\.$/) (4) if (&User-Name =~ /\\.$/) -> FALSE (4) if (&User-Name =~ /@\\./) (4) if (&User-Name =~ /@\\./) -> FALSE (4) } # filter_username filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix : Checking for suffix after "@" (4) suffix : Looking up realm "example.cz" for User-Name = "mib@example.cz" (4) suffix : No such realm "example.cz" (4) [suffix] = noop (4) eap : Peer sent code Response (2) ID 5 length 1424 (4) eap : No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) [files] = noop (4) [expiration] = noop (4) [logintime] = noop (4) [pap] = noop (4) } # authorize = updated (4) Found Auth-Type = EAP (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap : Expiring EAP session with state 0x9fff236a9cfa2e86 (4) eap : Finished EAP session with state 0x9fff236a9cfa2e86 (4) eap : Previous EAP request found for state 0x9fff236a9cfa2e86, released from the list (4) eap : Peer sent method TLS (13) (4) eap : EAP TLS (13) (4) eap : Calling eap_tls to process EAP data (4) eap_tls : Authenticate (4) eap_tls : processing EAP-TLS TLS Length 1414 (4) eap_tls : Length Included (4) eap_tls : eaptls_verify returned 11 (4) eap_tls : <<< TLS 1.0 Handshake [length 03fa], Certificate (4) eap_tls : chain-depth=1, (4) eap_tls : error=0 (4) eap_tls : --> User-Name = mib@example.cz (4) eap_tls : --> BUF-Name = SelfSigned certificate (4) eap_tls : --> subject = /C=CZ/ST=CzechRepublic/L=NorthMoravia/O=AIB/emailAddress=it@example.cz/CN=SelfSigned certificate (4) eap_tls : --> issuer = /C=CZ/ST=CzechRepublic/L=NorthMoravia/O=AIB/emailAddress=it@example.cz/CN=SelfSigned certificate (4) eap_tls : --> verify return:1 (4) eap_tls : chain-depth=0, (4) eap_tls : error=0 (4) eap_tls : --> User-Name = mib@example.cz (4) eap_tls : --> BUF-Name = mib@example.cz (4) eap_tls : --> subject = /C=CZ/ST=CzechRepublic/O=AIB/CN=mib@example.cz/emailAddress=it@example.cz (4) eap_tls : --> issuer = /C=CZ/ST=CzechRepublic/L=NorthMoravia/O=AIB/emailAddress=it@example.cz/CN=SelfSigned certificate (4) eap_tls : --> verify return:1 (4) eap_tls : TLS_accept: SSLv3 read client certificate A (4) eap_tls : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange (4) eap_tls : TLS_accept: SSLv3 read client key exchange A (4) eap_tls : <<< TLS 1.0 Handshake [length 0106], CertificateVerify (4) eap_tls : TLS_accept: SSLv3 read certificate verify A (4) eap_tls : <<< TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_tls : <<< TLS 1.0 Handshake [length 0010], Finished (4) eap_tls : TLS_accept: SSLv3 read finished A (4) eap_tls : >>> TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_tls : TLS_accept: SSLv3 write change cipher spec A (4) eap_tls : >>> TLS 1.0 Handshake [length 0010], Finished (4) eap_tls : TLS_accept: SSLv3 write finished A (4) eap_tls : TLS_accept: SSLv3 flush data (4) eap_tls : (other): SSL negotiation finished successfully SSL Connection Established (4) eap_tls : eaptls_process returned 13 (4) eap : New EAP session, adding 'State' attribute to reply 0x9fff236a9bf92e86 (4) [eap] = handled (4) } # authenticate = handled (4) Sending Access-Challenge packet to host 172.16.0.20 port 32769, id=198, length=0 (4) EAP-Message = 0x010600450d800000003b140301000101160301003092eb4fba004b8fca7b15972c8d337c0f3b6660c6102d39d59fd772f1e11088113288b3fbdbfe92d783ab6d34f0aba8cc (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x9fff236a9bf92e86923483cd2cba31b1 Sending Access-Challenge Id 198 from 172.16.110.17:1812 to 172.16.0.20:32769 EAP-Message = 0x010600450d800000003b140301000101160301003092eb4fba004b8fca7b15972c8d337c0f3b6660c6102d39d59fd772f1e11088113288b3fbdbfe92d783ab6d34f0aba8cc Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9fff236a9bf92e86923483cd2cba31b1 (4) Finished request Waking up in 0.2 seconds. Received Access-Request Id 199 from 172.16.0.20:32769 to 172.16.110.17:1812 length 273 User-Name = 'mib@example.cz' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '20-10-7a-01-c1-80' Called-Station-Id = 'd0-c2-82-e0-cb-80' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' NAS-IP-Address = 172.16.0.20 NAS-Identifier = 'wlc' Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '200' EAP-Message = 0x020600060d00 State = 0x9fff236a9bf92e86923483cd2cba31b1 Message-Authenticator = 0x2430e3517ff9c9dc9ef80772144fcb31 (5) Received Access-Request packet from host 172.16.0.20 port 32769, id=199, length=273 (5) User-Name = 'mib@example.cz' (5) Chargeable-User-Identity = 0x00 (5) Location-Capable = Civix-Location (5) Calling-Station-Id = '20-10-7a-01-c1-80' (5) Called-Station-Id = 'd0-c2-82-e0-cb-80' (5) NAS-Port = 1 (5) Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' (5) Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' (5) NAS-IP-Address = 172.16.0.20 (5) NAS-Identifier = 'wlc' (5) Airespace-Wlan-Id = 3 (5) Service-Type = Framed-User (5) Framed-MTU = 1300 (5) NAS-Port-Type = Wireless-802.11 (5) Tunnel-Type:0 = VLAN (5) Tunnel-Medium-Type:0 = IEEE-802 (5) Tunnel-Private-Group-Id:0 = '200' (5) EAP-Message = 0x020600060d00 (5) State = 0x9fff236a9bf92e86923483cd2cba31b1 (5) Message-Authenticator = 0x2430e3517ff9c9dc9ef80772144fcb31 (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) filter_username filter_username { (5) if (!&User-Name) (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\\.\\./ ) (5) if (&User-Name =~ /\\.\\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\\.$/) (5) if (&User-Name =~ /\\.$/) -> FALSE (5) if (&User-Name =~ /@\\./) (5) if (&User-Name =~ /@\\./) -> FALSE (5) } # filter_username filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix : Checking for suffix after "@" (5) suffix : Looking up realm "example.cz" for User-Name = "mib@example.cz" (5) suffix : No such realm "example.cz" (5) [suffix] = noop (5) eap : Peer sent code Response (2) ID 6 length 6 (5) eap : No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) [files] = noop (5) [expiration] = noop (5) [logintime] = noop (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap : Expiring EAP session with state 0x9fff236a9bf92e86 (5) eap : Finished EAP session with state 0x9fff236a9bf92e86 (5) eap : Previous EAP request found for state 0x9fff236a9bf92e86, released from the list (5) eap : Peer sent method TLS (13) (5) eap : EAP TLS (13) (5) eap : Calling eap_tls to process EAP data (5) eap_tls : Authenticate (5) eap_tls : processing EAP-TLS (5) eap_tls : Received TLS ACK (5) eap_tls : Received TLS ACK (5) eap_tls : ACK handshake is finished (5) eap_tls : eaptls_verify returned 3 (5) eap_tls : eaptls_process returned 3 (5) eap_tls : Processing EAP-TLS Certificate check: (5) server check-eap-tls { (5) Request: User-Name = 'mib@example.cz' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '20-10-7a-01-c1-80' Called-Station-Id = 'd0-c2-82-e0-cb-80' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=ac1000140000066956632be4' Acct-Session-Id = '56632be4/20:10:7a:01:c1:80/574' NAS-IP-Address = 172.16.0.20 NAS-Identifier = 'wlc' Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = '200' EAP-Message = 0x020600060d00 State = 0x9fff236a9bf92e86923483cd2cba31b1 Message-Authenticator = 0x2430e3517ff9c9dc9ef80772144fcb31 Event-Timestamp = 'Dec 5 2015 19:24:37 CET' EAP-Type = TLS (5) # Executing section authorize from file /etc/raddb/sites-enabled/check-eap-tls (5) authorize { (5) update config { (5) Auth-Type := Accept (5) } # update config = noop (5) if ("%{TLS-Client-Cert-Common-Name}" =~ /^[A-z.]*@example\.cz$/) (5) EXPAND %{TLS-Client-Cert-Common-Name} (5) --> (5) if ("%{TLS-Client-Cert-Common-Name}" =~ /^[A-z.]*@example\.cz$/) -> FALSE (5) else else { (5) update config { (5) Auth-Type := Reject (5) } # update config = noop (5) update reply { (5) Reply-Message := 'Your certificate is not valid.' (5) } # update reply = noop (5) } # else else = noop (5) auth_log : EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (5) auth_log : --> /var/log/radius/radacct/172.16.0.20/auth-detail-20151205 (5) auth_log : /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/172.16.0.20/auth-detail-20151205 (5) auth_log : EXPAND %t (5) auth_log : --> Sat Dec 5 19:24:37 2015 (5) [auth_log] = ok (5) } # authorize = ok (5) Found Auth-Type = Reject (5) Auth-Type = Reject, rejecting user (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) Reply: Reply-Message := 'Your certificate is not valid.' (5) } # server check-eap-tls (5) eap_tls : Certificates were rejected by the virtual server (5) ERROR: eap : Failed continuing EAP TLS (13) session. EAP sub-module failed (5) eap : Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Post-Auth-Type REJECT { (5) attr_filter.access_reject : EXPAND %{User-Name} (5) attr_filter.access_reject : --> mib@example.cz (5) attr_filter.access_reject : Matched entry DEFAULT at line 11 (5) [attr_filter.access_reject] = updated (5) eap : Reply already contained an EAP-Message, not inserting EAP-Failure (5) [eap] = noop (5) remove_reply_message_if_eap remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) (5) if (&reply:EAP-Message && &reply:Reply-Message) -> TRUE (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) update reply { (5) Reply-Message !* ANY (5) } # update reply = noop (5) } # if (&reply:EAP-Message && &reply:Reply-Message) = noop (5) ... skipping else for request 5: Preceding "if" was taken (5) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1 seconds Waking up in 0.2 seconds. Waking up in 0.6 seconds. (5) Sending delayed response (5) Sending Access-Reject packet to host 172.16.0.20 port 32769, id=199, length=0 (5) EAP-Message = 0x04060004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Sending Access-Reject Id 199 from 172.16.110.17:1812 to 172.16.0.20:32769 EAP-Message = 0x04060004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (0) Cleaning up request packet ID 194 with timestamp +10 (1) Cleaning up request packet ID 195 with timestamp +10 (2) Cleaning up request packet ID 196 with timestamp +10 (3) Cleaning up request packet ID 197 with timestamp +10 (4) Cleaning up request packet ID 198 with timestamp +11 (5) Cleaning up request packet ID 199 with timestamp +11 Ready to process requests