Yes The parameter here for "Tunnel-Private-Group-ID" if for the "untag". The new parameters to put are : *_with the name of the vlan :_* */Egress-VLAN-Name/* (instead of Tunnel-Private-Group-ID) and 1voice (to tag the vlan "voice") and 2user (to untag the vlan "user") or *_you can choose the "hex" style which means to use the "_**_Egress-VLANID" parameter :_* To TAG ==> "*0x31*", to UNTAG ==> "*0x32*"; then you add 3 zeros, and then the number of your vlan translated into hexadecimal on 3 digits So, in English it means for the tag vlan voice number 10 ==> *0x31 000 00A* for the untag vlan "user" number 200 ==> *0x32 000 0C8* *your example : * as a TAG (such a voip phone) dot1x Cleartext-Password := "voip" Service-Type = login, Tunnel-Type = VLAN , Tunnel-Medium-Type = IEEE-802 , **_**__*Egress-VLAN-Name*__*= *__*1voice*_**or _*Egress-VLANID*__*= 0x3100000A*_ dot1x Cleartext-Password := "linux" Service-Type = login, Tunnel-Type = VLAN , Tunnel-Medium-Type = IEEE-802 , **_**__*Egress-VLAN-Name*__*= *__*2user*_**or _*Egress-VLANID*__*= 0x320000C8*_ I hope it's enough clear for you... :-) These parameters work with a HP Procurve, a Zyxel (1910), a Cisco 3550 and a Cisco 2960 and with VOIP phones too (to be tag, and to untagg devices plugged on it). Ben Gailly. Le 28-04-20 à 14:27, Heikki Lavaste a écrit :
Hi,
I've some client devices connected to a switch. Is there a way to set the vlan that radius assigns to be tagged/untagged? I saw some examples of a HP/Aruba VSA that can do this, but anything vendor neutral way to do the same? Example user:
dot1x Cleartext-Password := "linux" Service-Type = login, Tunnel-Type = VLAN , Tunnel-Medium-Type = IEEE-802 , Tunnel-Private-Group-ID = 100
Kind regards
Heikki Lavaste
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html