Hello! I'm trying to find out, if the DELL switch S3148P with OS9 (9.14.2.23) supports dynamically setting of tagged VLAN-IDs. Setting the untagged VLAN-ID with "Tunnel-Private-Group-Id" attribute works. I tried setting the tagged (and untagged) VLAN-IDs with the "Egress-VLANID" attribute, but without success. This still can be a configuration problem on my side. If I execute the "show vlan" command, I see the following: ASW01# show vlan Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P - Primary, C - Community, I - Isolated O - Openflow, Vx - Vxlan Q: U - Untagged, T - Tagged x - Dot1x untagged, X - Dot1x tagged o - OpenFlow untagged, O - OpenFlow tagged G - GVRP tagged, M - Vlan-stack i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged NUM Status Description Q Ports * 1 Active U Po49(Te 1/49) U Gi 1/48 U Gi 2/1,2/14,2/16-2/17,2/19-2/22,2/24,2/38-2/39,2/41-2/45,2/48 1004 Active ANS-LAN-WLMGM01 T Po49(Te 1/49) x Gi 2/44 <------ HERE 1053 Active LAN-ZUK02 T Po49(Te 1/49) In this case (HERE) the untagged VLAN was correctly set via Radius. If you take a look at the legend above, you will see: x - Dot1x untagged, X - Dot1x tagged So, I suspect in general the assigning of untagged AND tagged is supported. Because I cannot find any further information in the internet, I hope some user here can help me... Regards Sven