this is the debug for user jvidal and the user didn`t found ....
rad_recv: Access-Request packet from host 192.168.0.2:1035, id=100, length=154 User-Name = "jvidal" NAS-IP-Address = 192.168.0.2 NAS-Port = 3 Called-Station-Id = "00-1E-2A-3C-D2-90:NETGEAR2" Calling-Station-Id = "00-18-4D-66-60-24" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000b016a766964616c Message-Authenticator = 0xd245baabd1d9b6ece4c2122fe0b744df Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "jvidal", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 radius_xlat: 'jvidal' rlm_sql (sql): sql_set_user escaped user --> 'jvidal' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'jvidal' ORDER BY id' rlm_sql (sql): Reservingrlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'jvidal' ORDER BY id radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'jvidal' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' rlm_sql_mysql: query: SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'jvidal' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'jvidal' ORDER BY id' rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'jvidal' ORDER BY id radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'jvidal' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql_mysql: query: SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'jvidal' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id rlm_sql (sql): Released sql socket id: 4 rlm_sql (sql): No matching entry in the database for request from user [jvidal] modcall[authorize]: module "sql" returns notfound for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 sql socket id: 4 rlm_sql (sql): No matching entry in the database for request from user [jvidal] modcall[authorize]: module "sql" returns notfound for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 100 to 192.168.0.2 port 1035 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x314214bdd05f8421ec27027c7fade7d4 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds...
This debug (that's a problem with certificates explained in FAQ and eap.conf) doesn't belong to this radius.log output:
But radius.log is reporting this:
Tue Dec 23 10:40:44 2008 : Info: rlm_eap_mschapv2: Issuing Challenge Tue Dec 23 10:40:44 2008 : Info: rlm_sql (sql): No matching entry in the database for request from user [jvidal] Tue Dec 23 10:40:44 2008 : Info: rlm_sql (sql): No matching entry in the database for request from user [jvidal] Tue Dec 23 10:40:44 2008 : Auth: Login incorrect: [jvidal/<no User-Password attribute>] (from client radius-server port 0) Tue Dec 23 10:40:44 2008 : Info: rlm_sql (sql): No matching entry in the database for request from user [jvidal] Tue Dec 23 10:40:44 2008 : Auth: Login incorrect: [jvidal/<no User-Password attribute>] (from client red-Wifi-FCMC1 port 1 cli 00-18-4D-66-60-24)
Ivan Kalik Kalik Informatika ISP