Hi. I managed to get EAP-TTLS/TLS working but EAP-PEAP/TLS fails after the outer TLS tunnel is established: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x992158e5992955e0 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! and then later on rlm_eap: No EAP session matching the State variable. [inner-eap] Either EAP-request timed out OR EAP-response to an unknown EAP-request I've read the instructions but none of that seems to apply to my situation There is TLV result - failure in the supplicant log but I don't have a clue if that is a cause or a effect of the error in freeradius. Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAP-PEAP: received 37 bytes encrypted data for Phase 2 Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAP-PEAP: Decrypted Phase 2 EAP - hexdump(len=5): 01 07 00 05 +01 Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAP-PEAP: received Phase 2: code=1 identifier=7 length=5 Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAP-PEAP: Phase 2 Request: type=1 Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAP-PEAP: Encrypting Phase 2 data - hexdump(len=18): [REMOVED] Aug 21 12:22:34 localhost wpa_supplicant[19681]: SSL: 90 bytes left to be sent out (of total 90 bytes) Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAP: method process -> ignore=FALSE methodState=MAY_CONT +decision=FAIL Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAP: EAP entering state SEND_RESPONSE Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAP: EAP entering state IDLE Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAPOL: SUPP_BE entering state RESPONSE Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAPOL: txSuppRsp Aug 21 12:22:34 localhost wpa_supplicant[19681]: TX EAPOL: dst=00:24:14:3a:95:d0 Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAPOL: SUPP_BE entering state RECEIVE Aug 21 12:22:34 localhost wpa_supplicant[19681]: EAPOL: startWhen --> 0 Aug 21 12:22:46 localhost wpa_supplicant[19681]: EAP-TLV: TLV Result - Failure Aug 21 12:22:47 localhost wpa_supplicant[19681]: wlan0: CTRL-EVENT-EAP-FAILURE EAP authentication failed Thanks for any help Martin