I am trying to get a freeradius implementation rolled out for the first time and am running into a few issues that I cannot seem to resolve. I have a Cisco 2960 in a test lab with a Linux server running freeradius 2.0.0 for authentication. There are 2 problems I am running into. 1. I cannot seem to get the radius server to authenticate a user and place them at the privilege exec prompt, even thought I have configured the 'users' file to place all users at the privilege exec prompt when logging in by default (I did this just to test, ultimately I would like to create groups with different privilege levels). 2. I cannot seem to get the Cisco 2960 to accept the radius servers authentication response when logging in the device via a VTY session using SSH. When running the server in debug mode, you can see the request coming in and the server sending the authentication response back to the switch, but the authentication will still fail at the switch. The only authentication I get is at the console level. Any help would be greatly appreciated. Thank you. Joe Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received.