What you're after is in the clients - file surely - that's where you set up the clients and secrets..? Otherwise maybe check if the secret in your switch is encrypted or not, cisco switches allow input of a 7 or 0 after certain commands to signify encryption or not - from a cisco NAS.. Not sure if allied is the same, not seen one. 0 Specifies an UNENCRYPTED key will follow 7 Specifies HIDDEN key will follow I dunno,maybe I am on the wrong tack - can't pretend I know much! Andy From: freeradius-users-bounces+andy.franks=sath.nhs.uk@lists.freeradius.org [mailto:freeradius-users-bounces+andy.franks=sath.nhs.uk@lists.freeradiu s.org] On Behalf Of Roberto Carna Sent: 23 May 2013 15:52 To: FreeRadius users mailing list Subject: Re: Problem: switch authentication against Freeradius server OK, but using "radtest" utility with user, password and shared secret from other machine, I get the correct response from Freeradius, accepting the authentication. So, the problem maybe is in my Allied switch, maybe the OS is wrong in certain aspects like cipher libraries. Thanks to all. 2013/5/23 Alan DeKok <aland@deployingradius.com> Roberto Carna wrote:
OK, just a last question....I have Freeradius with MySQL, where is the NAS in order to check the pre-shared secret ???
If you have already edited the shared secret, you should know where it is. Go read the documentation. If you're too lazy to read it, I'm too lazy to cut & paste it here. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html