19 Apr
2019
19 Apr
'19
9:59 a.m.
Hi i have installed freeradius successfully and radiusd-x status is ok
to test my installation setup is all ok, I have inserted an entry
manually into table with below information as
INSERT INTO radcheck (UserName, Attribute, Value, Op) VALUES ('testuser',
'testing!23', 'testing!23', ':=');
and when i execute the command
radtest testuser 'testing!23' 127.0.0.1 0 'testing!23'
i am getting as below
Sent Access-Request Id 38 from 0.0.0.0:50157 to 127.0.0.1:1812 length 75
User-Name = "testuser"
User-Password = "testing!23"
NAS-IP-Address = 192.168.2.172
NAS-Port = 0
Message-Authenticator = 0x00
Cleartext-Password = "testing!23"
*Received Access-Reject Id 38 from 127.0.0.1:1812 <http://127.0.0.1:1812>
to 0.0.0.0:0 <http://0.0.0.0:0> length 20*
(0) -: *Expected Access-Accept got Access-Reject*
*In tail -f /var/log/radius/radius.log* i can see as below
Info: Need 0 more connections to reach min connections (3)
Info: Need 0 more connections to reach min connections (3)
----> Researched in Google and one of forum it suggest as
If you are on a systemd-based system (e.g. CentOS 7, Ubuntu 16.04),
another option is to get systemd to restart freeradius for you.
*systemctl edit radiusd # or systemctl edit freeradius *
* This will throw you into an editor. Type: *
* [Service] *
* Restart=always *
* RestartSec=3 *
* and exit and save. (Note: exact capitalisation is important) *
I followed the above steps with RestartSec = 1 as value and restarted the
radiusd
*now i am getting more errors*
[root@nusalxsl0983 ~]# tail -f /var/log/radius/radius.log
Fri Apr 19 13:09:16 2019 : Info: rlm_sql (sql): Closing connection (0): Hit
idle_timeout, was idle for 64 seconds
Fri Apr 19 13:09:16 2019 : Info: rlm_sql (sql): Closing connection (5): Hit
idle_timeout, was idle for 64 seconds
Fri Apr 19 13:09:16 2019 : Info: rlm_sql (sql): Opening additional
connection (6), 1 of 32 pending slots used
Fri Apr 19 13:09:16 2019 : Info: Need 2 more connections to reach min
connections (3)
Fri Apr 19 13:09:16 2019 : Info: rlm_sql (sql): Opening additional
connection (7), 1 of 31 pending slots used
Fri Apr 19 13:34:37 2019 : Info: rlm_sql (sql): Closing connection (7): Hit
idle_timeout, was idle for 1521 seconds
Fri Apr 19 13:34:37 2019 : Info: rlm_sql (sql): Closing connection (6): Hit
idle_timeout, was idle for 1521 seconds
Any help would be appreciated.
Thanks,
surya
On Wed, Apr 17, 2019 at 10:07 PM Surya Teja <suryateja042@gmail.com> wrote:
> Hi Jorge Pereira,
> Thanks for steps, will delete all old entries and retry with new version
> with given steps
>
> On Wed, 17 Apr 2019, 10:04 p.m. Jorge Pereira, <jpereira@freeradius.org>
> wrote:
>
>> ./configure --prefix=/opt/freeradius
>> make
>> make install
>> /opt/freeradius/sbin/radiusd -X
>>
>>
>>
>> On Wed, Apr 17, 2019 at 1:26 PM Surya Teja <suryateja042@gmail.com>
>> wrote:
>>
>> > Yes the same question is posted in git hub and there it suggested to
>> check
>> > the files whether it have any multiple such files , yes i checked it and
>> > find only one file and still getting issue it was blocked unable to
>> reply
>> > So,i have posted my status of checking files here
>> >
>> > On Wed, 17 Apr 2019, 8:46 p.m. Alan DeKok, <aland@deployingradius.com>
>> > wrote:
>> >
>> > > On Apr 17, 2019, at 11:13 AM, Surya Teja <suryateja042@gmail.com>
>> wrote:
>> > > >
>> > > > I am facing the below error while i am executing the command
>> > > > sudo /usr/sbin/radiusd -X
>> > > > */etc/raddb/mods-enabled/always[35]: Failed loading module
>> rlm_always
>> > > from
>> > > > file /usr/lib64/freeradius/rlm_always.so*
>> > > > */etc/raddb/mods-enabled/always[35]: Application and rlm_always
>> magic
>> > > > number (prefix) mismatch. application: 0 module: f4*
>> > > > I have installed the free radius of version (3.0.18).Due to some
>> > issue I
>> > > > have again installed 3.0.19 but now i am facing the above new issue
>> and
>> > > > even when i grep with the *rlm_always*
>> > > > I can see only one folder which contains
>> > > > -rw-r--r-- 1 root root 49 Feb 25 21:41 all.mk
>> > > > -rw-r--r-- 1 root root 4360 Feb 25 21:41 rlm_always.c
>> > > >
>> > > > [root@nusalxsl0983 ~]# find / -name rlm_always
>> > > > /tmp/freeradius-server-release_3_0_18/src/modules/rlm_always
>> > > > [root@nusalxsl0983 ~]#
>> > > > can any one has any idea how to fix it ?
>> > >
>> > > You asked this question on GitHub, and were told the answer there.
>> > >
>> > > Why ask questions and ignore the answer?
>> > >
>> > > For other readers, you've installed two different versions of
>> > FreeRADIUS
>> > > at the same time. Don't do that. Delete both, and install only one.
>> > >
>> > > Alan DeKok.
>> > >
>> > >
>> > > -
>> > > List info/subscribe/unsubscribe? See
>> > > http://www.freeradius.org/list/users.html
>> > -
>> > List info/subscribe/unsubscribe? See
>> > http://www.freeradius.org/list/users.html
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>
>