tnt@kalik.net a écrit :
thanks for your return. I have added:
$RAD_REPLY{'Framed-IP-Address'} = "10.218.6.1"; return RLM_MODULE_OK;
but no change, he use the pool included into the cisco ASA (10.218.4.5)
a error of me ?
Do a debug (radiusd -X) and see did the attribute make it into the Access-Accept packet. If it is sent to Cisco - the problem is on ASA. Do debug aaa there and see why is it ignoring static IP address.
Ivan Kalik Kalik Informatika ISP
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Ok, first this is the debug of Freeradius: rad_recv: Access-Request packet from host 10.218.7.243:1025, id=50, length=165 User-Name = "usertest" User-Password = "XXX" NAS-Port = 1011712 Service-Type = Framed-User Framed-Protocol = PPP Called-Station-Id = "62.XX.XX.XX" Calling-Station-Id = "88.XX.XX.XX" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "88.XX.XX.XX" NAS-IP-Address = 10.218.7.243 Cisco-AVPair = "ip:source-ip=88.166.47.158y\223" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "usertest", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched entry DEFAULT at line 154 users: Matched entry DEFAULT at line 173 users: Matched entry DEFAULT at line 185 modcall[authorize]: module "files" returns ok for request 1 Using perl at 0x8146460 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Framed-IP-Address = 10.218.4.120 rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.0 rlm_perl: Added pair Framed-Compression = Van-Jacobson-TCP-IP rlm_perl: Added pair Framed-MTU = 576 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Auth-Type = Perl modcall[authorize]: module "perl" returns ok for request 1 modcall: leaving group authorize (returns ok) for request 1 rad_check_password: Found Auth-Type Perl auth: type "Perl" Processing the authenticate section of radiusd.conf modcall: entering group Perl for request 1 Using perl at 0x8146460 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair h323-credit-amount = 100 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Framed-IP-Address = 255.255.255.254 rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.0 rlm_perl: Added pair Framed-Compression = Van-Jacobson-TCP-IP rlm_perl: Added pair Framed-MTU = 576 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Auth-Type = Perl modcall[authenticate]: module "perl" returns ok for request 1 modcall: leaving group Perl (returns ok) for request 1 Login OK: [usertest/XX] (from client 10.218.7.243 port 1011712 cli 88.xx.xx.xx) Sending Access-Accept of id 50 to 10.218.7.243 port 1025 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Netmask = 255.255.255.0 h323-credit-amount = "100" Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 50 with timestamp 497f20c3 Nothing to do. Sleeping until we see a request.