Hello, I am trying to send back the same attribute in radreply and /or radgroupreply with different values to the NAS example : NAS send a Auth Request. Freeradius accept the request and send back attributes in radreply (or radgroupreply) (via sql table) Problem : sending back the same attributes with different values seems to not be possible. only the first attribute is sent back radreply table (id/username/attribute/op/value) content: 2 toto Cisco-AVPair = h323-ivr-in=Routing:192.168.1.10;expires=30;np_expires=40 3 toto Cisco-AVPair = h323-ivr-in=Routing:192.168.1.20;expires=30;np_expires=40 I tried also without cisco-avpair in the same radreply table: 4 toto h323-ivr-in = Routing:192.168.1.10;expires=30;np_expires=40 5 toto h323-ivr-in = Routing:192.168.1.20;expires=30;np_expires=40 Both case the received attributes on NAS side h323-ivr-in = Routing:192.168.1.10;expires=30;np_expires=40 Before these tests I tried simply the radtest tool for the same user and apparently Freeradius is sending back ONLY the oldest ID from the table radreply and NOT all the IDs matched by the select request. Also tested using USERS file with the same replies : h323-ivr-in = Routing:192.168.1.10;expires=30;np_expires=40, h323-ivr-in = Routing:192.168.1.20;expires=30;np_expires=40, Fall-Through = Yes There is something to do in the configuration to fix /allow that? regards -- Christian Thomas Mobile +55 (48) 8446 3575 Landline +55 (48) 3717 5005 Paris +33 1 8197 9899 USA +1 303 997 3242