On Aug 2, 2019, at 2:35 PM, Niloofar Toorchi <niloofar@opennetworking.org> wrote:
We are using freeRadius to authenticate 16 supplicants. The early ones get authorized but the last 3 or 4 ones get rejected corresponding the following logs in freeRadius:
Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { rlm_eap: No EAP session matching the State variable. [eap] Either EAP-request timed out OR EAP-response to an unknown EAP-request [eap] Failed in handler ++[eap] = invalid
That's v2. :( If it works, good. If not... please upgrade to v3. This is likely not a RADIUS issue. If the EAP session times out, it's because the supplicant is taking 30+ seconds between packets. Which is stupid.
Can any one help me to tackle this problem?
Test with v3, which has much better debugging messages. Alan DeKok.