Hi Alan, thanks for your patience. Il 05/01/2024 16:18, Alan DeKok ha scritto:
And the debug output says... what? If it says "unknown CA", I already explained what the problem is, and what needs to be done to fix it. Perhaps that's the issue. As I said, you have to configure the supplicant with the CA used to generate the server certificate.
I installed the CA certificate and collected the entire log file content: FreeRADIUS Version 3.2.3 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/totp including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/files including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/rfc7542 including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/canonicalization including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/tlcamb-tag main { security { user = "operatore" group = "operatore" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client TLC_TAG-MGT { ipaddr = 172.31.190.2 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = yes cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_totp # Loading module "totp" from file /etc/freeradius/mods-enabled/totp # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } instantiate { } # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = yes lifetime = 24 max_entries = 255 persist_dir = "/var/log/freeradius/tlscache" } verify { skip_if_ocsp_ok = no tmpdir = "/tmp/radiusd" client = "/usr/bin/openssl verify -CAfile /etc/freeradius/certs/ca.pem %{TLS-Client-Cert-Filename}" } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/sites-enabled/tlcamb-tag # Loading authenticate {...} Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:366 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 1812 } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 Listening on proxy address * port 37457 Ready to process requests (0) Received Access-Request Id 189 from 172.31.190.2:32768 to 172.31.189.84:1812 length 264 (0) User-Name = "bob" (0) Chargeable-User-Identity = 0x00 (0) Location-Capable = Civic-Location (0) Calling-Station-Id = "18-d6-1c-41-10-58" (0) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (0) NAS-Port = 1 (0) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (0) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (0) NAS-IP-Address = 172.31.190.2 (0) NAS-Identifier = "Cisco_b8:24:65" (0) Airespace-Wlan-Id = 2 (0) Service-Type = Framed-User (0) Framed-MTU = 1300 (0) NAS-Port-Type = Wireless-802.11 (0) Tunnel-Type:0 = VLAN (0) Tunnel-Medium-Type:0 = IEEE-802 (0) Tunnel-Private-Group-Id:0 = "190" (0) EAP-Message = 0x0201000801626f62 (0) Message-Authenticator = 0xa56b69482431dd25cd2eadfa730aab04 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (0) authorize { (0) [preprocess] = ok (0) eap: Peer sent EAP Response (code 2) ID 1 length 8 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_tls to process data (0) eap_tls: (TLS) Initiating new session (0) eap_tls: (TLS) Setting verify mode to require certificate from client (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0x0d11b4170d13b92d (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 189 from 172.31.189.84:1812 to 172.31.190.2:32768 length 64 (0) EAP-Message = 0x010200060d20 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x0d11b4170d13b92d61b96bcf376c045f (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 190 from 172.31.190.2:32768 to 172.31.189.84:1812 length 280 (1) User-Name = "bob" (1) Chargeable-User-Identity = 0x00 (1) Location-Capable = Civic-Location (1) Calling-Station-Id = "18-d6-1c-41-10-58" (1) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (1) NAS-Port = 1 (1) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (1) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (1) NAS-IP-Address = 172.31.190.2 (1) NAS-Identifier = "Cisco_b8:24:65" (1) Airespace-Wlan-Id = 2 (1) Service-Type = Framed-User (1) Framed-MTU = 1300 (1) NAS-Port-Type = Wireless-802.11 (1) Tunnel-Type:0 = VLAN (1) Tunnel-Medium-Type:0 = IEEE-802 (1) Tunnel-Private-Group-Id:0 = "190" (1) EAP-Message = 0x020200060319 (1) State = 0x0d11b4170d13b92d61b96bcf376c045f (1) Message-Authenticator = 0xdafc0b1348fcef4df99c152593fa1d99 (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (1) authorize { (1) [preprocess] = ok (1) eap: Peer sent EAP Response (code 2) ID 2 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [expiration] = noop (1) [logintime] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (1) authenticate { (1) eap: Expiring EAP session with state 0x0d11b4170d13b92d (1) eap: Finished EAP session with state 0x0d11b4170d13b92d (1) eap: Previous EAP request found for state 0x0d11b4170d13b92d, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: (TLS) Initiating new session (1) eap: Sending EAP Request (code 1) ID 3 length 6 (1) eap: EAP session adding &reply:State = 0x0d11b4170c12ad2d (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) Sent Access-Challenge Id 190 from 172.31.189.84:1812 to 172.31.190.2:32768 length 64 (1) EAP-Message = 0x010300061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x0d11b4170c12ad2d61b96bcf376c045f (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 191 from 172.31.190.2:32768 to 172.31.189.84:1812 length 415 (2) User-Name = "bob" (2) Chargeable-User-Identity = 0x00 (2) Location-Capable = Civic-Location (2) Calling-Station-Id = "18-d6-1c-41-10-58" (2) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (2) NAS-Port = 1 (2) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (2) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (2) NAS-IP-Address = 172.31.190.2 (2) NAS-Identifier = "Cisco_b8:24:65" (2) Airespace-Wlan-Id = 2 (2) Service-Type = Framed-User (2) Framed-MTU = 1300 (2) NAS-Port-Type = Wireless-802.11 (2) Tunnel-Type:0 = VLAN (2) Tunnel-Medium-Type:0 = IEEE-802 (2) Tunnel-Private-Group-Id:0 = "190" (2) EAP-Message = 0x0203008d198000000083160301007e0100007a0303c6f301ce926ca1685ce0dbfb51a89f6b48740f866852288de095da1412a88e4d00001ec02bc02fc02cc030cca9cca8c009c013c00ac014009c009d002f0035000a0100003300170000ff01000100000a00080006001d00170018000b00020100000d00140012040308040401050308050501080606010201 (2) State = 0x0d11b4170c12ad2d61b96bcf376c045f (2) Message-Authenticator = 0xb18c0203b47bef6e6a99f6d2e3a6ac5b (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (2) authorize { (2) [preprocess] = ok (2) eap: Peer sent EAP Response (code 2) ID 3 length 141 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (2) authenticate { (2) eap: Expiring EAP session with state 0x0d11b4170c12ad2d (2) eap: Finished EAP session with state 0x0d11b4170c12ad2d (2) eap: Previous EAP request found for state 0x0d11b4170c12ad2d, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: (TLS) EAP Peer says that the final record size will be 131 bytes (2) eap_peap: (TLS) EAP Got all data (131 bytes) (2) eap_peap: (TLS) Handshake state - before SSL initialization (2) eap_peap: (TLS) Handshake state - Server before SSL initialization (2) eap_peap: (TLS) Handshake state - Server before SSL initialization (2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello (2) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (2) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server done (2) eap_peap: (TLS) In Handshake Phase (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0x0d11b4170f15ad2d (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 191 from 172.31.189.84:1812 to 172.31.190.2:32768 length 1068 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x0d11b4170f15ad2d61b96bcf376c045f (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 192 from 172.31.190.2:32768 to 172.31.189.84:1812 length 280 (3) User-Name = "bob" (3) Chargeable-User-Identity = 0x00 (3) Location-Capable = Civic-Location (3) Calling-Station-Id = "18-d6-1c-41-10-58" (3) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (3) NAS-Port = 1 (3) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (3) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (3) NAS-IP-Address = 172.31.190.2 (3) NAS-Identifier = "Cisco_b8:24:65" (3) Airespace-Wlan-Id = 2 (3) Service-Type = Framed-User (3) Framed-MTU = 1300 (3) NAS-Port-Type = Wireless-802.11 (3) Tunnel-Type:0 = VLAN (3) Tunnel-Medium-Type:0 = IEEE-802 (3) Tunnel-Private-Group-Id:0 = "190" (3) EAP-Message = 0x020400061900 (3) State = 0x0d11b4170f15ad2d61b96bcf376c045f (3) Message-Authenticator = 0xd9637685761ab785243b786f07806ea7 (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (3) authorize { (3) [preprocess] = ok (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (3) authenticate { (3) eap: Expiring EAP session with state 0x0d11b4170f15ad2d (3) eap: Finished EAP session with state 0x0d11b4170f15ad2d (3) eap: Previous EAP request found for state 0x0d11b4170f15ad2d, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 5 length 1000 (3) eap: EAP session adding &reply:State = 0x0d11b4170e14ad2d (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 192 from 172.31.189.84:1812 to 172.31.190.2:32768 length 1064 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x0d11b4170e14ad2d61b96bcf376c045f (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 193 from 172.31.190.2:32768 to 172.31.189.84:1812 length 280 (4) User-Name = "bob" (4) Chargeable-User-Identity = 0x00 (4) Location-Capable = Civic-Location (4) Calling-Station-Id = "18-d6-1c-41-10-58" (4) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (4) NAS-Port = 1 (4) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (4) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (4) NAS-IP-Address = 172.31.190.2 (4) NAS-Identifier = "Cisco_b8:24:65" (4) Airespace-Wlan-Id = 2 (4) Service-Type = Framed-User (4) Framed-MTU = 1300 (4) NAS-Port-Type = Wireless-802.11 (4) Tunnel-Type:0 = VLAN (4) Tunnel-Medium-Type:0 = IEEE-802 (4) Tunnel-Private-Group-Id:0 = "190" (4) EAP-Message = 0x020500061900 (4) State = 0x0d11b4170e14ad2d61b96bcf376c045f (4) Message-Authenticator = 0xda41e2480443e88f2b6b4f53deb52a66 (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (4) authorize { (4) [preprocess] = ok (4) eap: Peer sent EAP Response (code 2) ID 5 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (4) authenticate { (4) eap: Expiring EAP session with state 0x0d11b4170e14ad2d (4) eap: Finished EAP session with state 0x0d11b4170e14ad2d (4) eap: Previous EAP request found for state 0x0d11b4170e14ad2d, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: (TLS) Peer ACKed our handshake fragment (4) eap: Sending EAP Request (code 1) ID 6 length 1000 (4) eap: EAP session adding &reply:State = 0x0d11b4170917ad2d (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) Sent Access-Challenge Id 193 from 172.31.189.84:1812 to 172.31.190.2:32768 length 1064 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x0d11b4170917ad2d61b96bcf376c045f (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 194 from 172.31.190.2:32768 to 172.31.189.84:1812 length 280 (5) User-Name = "bob" (5) Chargeable-User-Identity = 0x00 (5) Location-Capable = Civic-Location (5) Calling-Station-Id = "18-d6-1c-41-10-58" (5) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (5) NAS-Port = 1 (5) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (5) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (5) NAS-IP-Address = 172.31.190.2 (5) NAS-Identifier = "Cisco_b8:24:65" (5) Airespace-Wlan-Id = 2 (5) Service-Type = Framed-User (5) Framed-MTU = 1300 (5) NAS-Port-Type = Wireless-802.11 (5) Tunnel-Type:0 = VLAN (5) Tunnel-Medium-Type:0 = IEEE-802 (5) Tunnel-Private-Group-Id:0 = "190" (5) EAP-Message = 0x020600061900 (5) State = 0x0d11b4170917ad2d61b96bcf376c045f (5) Message-Authenticator = 0x88618a00d2590eec642ecbc9d69420b8 (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (5) authorize { (5) [preprocess] = ok (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (5) authenticate { (5) eap: Expiring EAP session with state 0x0d11b4170917ad2d (5) eap: Finished EAP session with state 0x0d11b4170917ad2d (5) eap: Previous EAP request found for state 0x0d11b4170917ad2d, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: (TLS) Peer ACKed our handshake fragment (5) eap: Sending EAP Request (code 1) ID 7 length 945 (5) eap: EAP session adding &reply:State = 0x0d11b4170816ad2d (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) Sent Access-Challenge Id 194 from 172.31.189.84:1812 to 172.31.190.2:32768 length 1009 (5) EAP-Message = 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 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x0d11b4170816ad2d61b96bcf376c045f (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 195 from 172.31.190.2:32768 to 172.31.189.84:1812 length 410 (6) User-Name = "bob" (6) Chargeable-User-Identity = 0x00 (6) Location-Capable = Civic-Location (6) Calling-Station-Id = "18-d6-1c-41-10-58" (6) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (6) NAS-Port = 1 (6) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (6) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (6) NAS-IP-Address = 172.31.190.2 (6) NAS-Identifier = "Cisco_b8:24:65" (6) Airespace-Wlan-Id = 2 (6) Service-Type = Framed-User (6) Framed-MTU = 1300 (6) NAS-Port-Type = Wireless-802.11 (6) Tunnel-Type:0 = VLAN (6) Tunnel-Medium-Type:0 = IEEE-802 (6) Tunnel-Private-Group-Id:0 = "190" (6) EAP-Message = 0x0207008819800000007e1603030046100000424104cd6bd7736158e470412015bb2ee5d346ada0a894992b3fa07f11e4c8ba7ba47b903aac71b564046e6972f93ec26bc1b29e67521e3970bc41d3bbf64ce9c424bd14030300010116030300280000000000000000a751777235b7701fd317e3496e0be3c062459dada4c49205c6e24f00fb0ffed7 (6) State = 0x0d11b4170816ad2d61b96bcf376c045f (6) Message-Authenticator = 0x9cf7a7b14313231804a56cdab9d7500a (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (6) authorize { (6) [preprocess] = ok (6) eap: Peer sent EAP Response (code 2) ID 7 length 136 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (6) authenticate { (6) eap: Expiring EAP session with state 0x0d11b4170816ad2d (6) eap: Finished EAP session with state 0x0d11b4170816ad2d (6) eap: Previous EAP request found for state 0x0d11b4170816ad2d, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: (TLS) EAP Peer says that the final record size will be 126 bytes (6) eap_peap: (TLS) EAP Got all data (126 bytes) (6) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (6) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (6) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (6) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (6) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished (6) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished (6) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec (6) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (6) eap_peap: (TLS) send TLS 1.2 Handshake, Finished (6) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished (6) eap_peap: Serialising session 28598cb4ba77510a52abb1e63011f9c061077719c09a59908092e2ca6b9c1ffd, and storing in cache (6) eap_peap: ERROR: (TLS) Session serialisation failed, failed opening session file /var/log/freeradius/tlscache/28598cb4ba77510a52abb1e63011f9c061077719c09a59908092e2ca6b9c1ffd.asn1: Permission denied (6) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully (6) eap_peap: (TLS) Connection Established (6) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (6) eap_peap: TLS-Session-Version = "TLS 1.2" (6) eap: Sending EAP Request (code 1) ID 8 length 57 (6) eap: EAP session adding &reply:State = 0x0d11b4170b19ad2d (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (6) session-state: Saving cached attributes (6) Framed-MTU = 994 (6) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 195 from 172.31.189.84:1812 to 172.31.190.2:32768 length 115 (6) EAP-Message = 0x0108003919001403030001011603030028bbbeaeb45ef65e6016f7876f98fea4df4b8d349a44428864b8e4073deecc9d9fbf3c637baf2060ea (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x0d11b4170b19ad2d61b96bcf376c045f (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 196 from 172.31.190.2:32768 to 172.31.189.84:1812 length 280 (7) User-Name = "bob" (7) Chargeable-User-Identity = 0x00 (7) Location-Capable = Civic-Location (7) Calling-Station-Id = "18-d6-1c-41-10-58" (7) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (7) NAS-Port = 1 (7) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (7) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (7) NAS-IP-Address = 172.31.190.2 (7) NAS-Identifier = "Cisco_b8:24:65" (7) Airespace-Wlan-Id = 2 (7) Service-Type = Framed-User (7) Framed-MTU = 1300 (7) NAS-Port-Type = Wireless-802.11 (7) Tunnel-Type:0 = VLAN (7) Tunnel-Medium-Type:0 = IEEE-802 (7) Tunnel-Private-Group-Id:0 = "190" (7) EAP-Message = 0x020800061900 (7) State = 0x0d11b4170b19ad2d61b96bcf376c045f (7) Message-Authenticator = 0xd401e5af0b9a419fdaf417106d38614e (7) Restoring &session-state (7) &session-state:Framed-MTU = 994 (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (7) authorize { (7) [preprocess] = ok (7) eap: Peer sent EAP Response (code 2) ID 8 length 6 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (7) authenticate { (7) eap: Expiring EAP session with state 0x0d11b4170b19ad2d (7) eap: Finished EAP session with state 0x0d11b4170b19ad2d (7) eap: Previous EAP request found for state 0x0d11b4170b19ad2d, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is finished (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state TUNNEL ESTABLISHED (7) eap: Sending EAP Request (code 1) ID 9 length 40 (7) eap: EAP session adding &reply:State = 0x0d11b4170a18ad2d (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (7) session-state: Saving cached attributes (7) Framed-MTU = 994 (7) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 196 from 172.31.189.84:1812 to 172.31.190.2:32768 length 98 (7) EAP-Message = 0x010900281900170303001dbbbeaeb45ef65e6162b484726759166336c75ee2efa33fd3ef9823735f (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x0d11b4170a18ad2d61b96bcf376c045f (7) Finished request Waking up in 4.9 seconds. (8) Received Access-Request Id 197 from 172.31.190.2:32768 to 172.31.189.84:1812 length 313 (8) User-Name = "bob" (8) Chargeable-User-Identity = 0x00 (8) Location-Capable = Civic-Location (8) Calling-Station-Id = "18-d6-1c-41-10-58" (8) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (8) NAS-Port = 1 (8) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (8) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (8) NAS-IP-Address = 172.31.190.2 (8) NAS-Identifier = "Cisco_b8:24:65" (8) Airespace-Wlan-Id = 2 (8) Service-Type = Framed-User (8) Framed-MTU = 1300 (8) NAS-Port-Type = Wireless-802.11 (8) Tunnel-Type:0 = VLAN (8) Tunnel-Medium-Type:0 = IEEE-802 (8) Tunnel-Private-Group-Id:0 = "190" (8) EAP-Message = 0x020900271900170303001c00000000000000010bfbfbf16742525071bfbbf45c50d4d0b12b3334 (8) State = 0x0d11b4170a18ad2d61b96bcf376c045f (8) Message-Authenticator = 0x63b9cf54b21cfa3f30bd43a45677d8e4 (8) Restoring &session-state (8) &session-state:Framed-MTU = 994 (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (8) authorize { (8) [preprocess] = ok (8) eap: Peer sent EAP Response (code 2) ID 9 length 39 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (8) authenticate { (8) eap: Expiring EAP session with state 0x0d11b4170a18ad2d (8) eap: Finished EAP session with state 0x0d11b4170a18ad2d (8) eap: Previous EAP request found for state 0x0d11b4170a18ad2d, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: (TLS) EAP Done initial handshake (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state WAITING FOR INNER IDENTITY (8) eap_peap: Identity - bob (8) eap_peap: Got inner identity 'bob' (8) eap_peap: Setting default EAP type for tunneled EAP session (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x0209000801626f62 (8) eap_peap: Setting User-Name to bob (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x0209000801626f62 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "bob" (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0209000801626f62 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "bob" (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bob", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 8 (8) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Peer sent packet with method EAP Identity (1) (8) eap: ERROR: Tried to start unsupported EAP type MSCHAPv2 (26) (8) eap: Sending EAP Failure (code 4) ID 9 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> bob (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) update outer.session-state { (8) &Module-Failure-Message := &request:Module-Failure-Message -> 'eap: Tried to start unsupported EAP type MSCHAPv2 (26)' (8) } # update outer.session-state = noop (8) } # Post-Auth-Type REJECT = updated (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 0x04090004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply code 3 (8) eap_peap: EAP-Message = 0x04090004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply RADIUS code 3 (8) eap_peap: EAP-Message = 0x04090004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Tunneled authentication was rejected (8) eap_peap: FAILURE (8) eap: Sending EAP Request (code 1) ID 10 length 46 (8) eap: EAP session adding &reply:State = 0x0d11b417051bad2d (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (8) session-state: Saving cached attributes (8) Framed-MTU = 994 (8) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (8) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (8) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (8) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (8) TLS-Session-Version = "TLS 1.2" (8) Module-Failure-Message := "eap: Tried to start unsupported EAP type MSCHAPv2 (26)" (8) Sent Access-Challenge Id 197 from 172.31.189.84:1812 to 172.31.190.2:32768 length 104 (8) EAP-Message = 0x010a002e19001703030023bbbeaeb45ef65e627aa4bccaa2c60861939a0f335e061557fc95843a2eae5411d60d14 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x0d11b417051bad2d61b96bcf376c045f (8) Finished request Waking up in 4.9 seconds. (9) Received Access-Request Id 198 from 172.31.190.2:32768 to 172.31.189.84:1812 length 320 (9) User-Name = "bob" (9) Chargeable-User-Identity = 0x00 (9) Location-Capable = Civic-Location (9) Calling-Station-Id = "18-d6-1c-41-10-58" (9) Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag" (9) NAS-Port = 1 (9) Cisco-AVPair = "audit-session-id=ac1fc7020000007a659828a7" (9) Acct-Session-Id = "659828a7/18:d6:1c:41:10:58/127" (9) NAS-IP-Address = 172.31.190.2 (9) NAS-Identifier = "Cisco_b8:24:65" (9) Airespace-Wlan-Id = 2 (9) Service-Type = Framed-User (9) Framed-MTU = 1300 (9) NAS-Port-Type = Wireless-802.11 (9) Tunnel-Type:0 = VLAN (9) Tunnel-Medium-Type:0 = IEEE-802 (9) Tunnel-Private-Group-Id:0 = "190" (9) EAP-Message = 0x020a002e19001703030023000000000000000223f50c731b3798307fe0fc5cd61bc2d2aa1749c703090f7b0ad738 (9) State = 0x0d11b417051bad2d61b96bcf376c045f (9) Message-Authenticator = 0xb22fcc0660d918d2885cd2e8a99b32f2 (9) Restoring &session-state (9) &session-state:Framed-MTU = 994 (9) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (9) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (9) &session-state:TLS-Session-Version = "TLS 1.2" (9) &session-state:Module-Failure-Message := "eap: Tried to start unsupported EAP type MSCHAPv2 (26)" (9) # Executing section authorize from file /etc/freeradius/sites-enabled/tlcamb-tag (9) authorize { (9) [preprocess] = ok (9) eap: Peer sent EAP Response (code 2) ID 10 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (9) authenticate { (9) eap: Expiring EAP session with state 0x0d11b417051bad2d (9) eap: Finished EAP session with state 0x0d11b417051bad2d (9) eap: Previous EAP request found for state 0x0d11b417051bad2d, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: (TLS) EAP Done initial handshake (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv failure (9) eap_peap: Received EAP-TLV response (9) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (9) eap_peap: This means you need to read the PREVIOUS messages in the debug output (9) eap_peap: to find out the reason why the user was rejected (9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (9) eap_peap: what went wrong, and how to fix the problem tls: Removing session 28598cb4ba77510a52abb1e63011f9c061077719c09a59908092e2ca6b9c1ffd from the cache tls: Could not remove persisted session file /var/log/freeradius/tlscache/28598cb4ba77510a52abb1e63011f9c061077719c09a59908092e2ca6b9c1ffd.asn1: Permission denied (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 10 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> bob (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 198 from 172.31.189.84:1812 to 172.31.190.2:32768 length 44 (9) EAP-Message = 0x040a0004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (0) Cleaning up request packet ID 189 with timestamp +3 due to cleanup_delay was reached (1) Cleaning up request packet ID 190 with timestamp +3 due to cleanup_delay was reached (2) Cleaning up request packet ID 191 with timestamp +3 due to cleanup_delay was reached (3) Cleaning up request packet ID 192 with timestamp +3 due to cleanup_delay was reached (4) Cleaning up request packet ID 193 with timestamp +3 due to cleanup_delay was reached (5) Cleaning up request packet ID 194 with timestamp +3 due to cleanup_delay was reached (6) Cleaning up request packet ID 195 with timestamp +3 due to cleanup_delay was reached (7) Cleaning up request packet ID 196 with timestamp +3 due to cleanup_delay was reached (8) Cleaning up request packet ID 197 with timestamp +3 due to cleanup_delay was reached (9) Cleaning up request packet ID 198 with timestamp +3 due to cleanup_delay was reached Thanks and best regards. Dario Barbon