[Wimax TTLS with Alcatel - Lucent ASN GW]

2 Apr 2009

      Hello,

First thanks again for this new release that adds very interesting 
features for debug, specially raddebug and radmin.

Using basic setup, Freeradius successfully authenticate request coming 
from CPE Wimax through ASN Alcatel GW (called WAC) using EAP/TTLS

Fri Apr  3 01:05:10 2009 : Auth: Login OK: [00210400E0D7@test.fr/<via 
Auth-Type = EAP>] (from client wimax port 0 cli 00-21-04-00-E0-D7)
Fri Apr  3 01:05:19 2009 : Auth: Login OK: [cpe2-lab@test.fr/<via 
Auth-Type = mschap>] (from client wimax port 0 via TLS tunnel)

I now have 2 issues to fill properly the access accept with correct 
attribute. (This needs might be weird, but it is the way this ASN GW works)

1. I would like that the outer access accept contains  attributes coming 
from  the inner access accept

So I tried to use the update outer.reply on post-auth section of the 
inner-tunnel virtual server

        update outer.reply {
                #User-Name = "%{request:User-Name}"
                WiMAX-Packet-Data-Flow-Id = 
"%{request:WiMAX-Packet-Data-Flow-Id}"
        }

But as I understand, you can only use "request" from the inner tunnel, 
but not the attribute contained in the reply of the inner tunnel. Is 
that true ? Is there a way to do that.

To be more precise this is the reply in the inner tunnel

Fri Apr  3 01:13:33 2009
        Packet-Type = Access-Accept
        WiMAX-Packet-Data-Flow-Id = 1
        WiMAX-Service-Data-Flow-Id = 1
        WiMAX-Service-Profile-Id = 1
        WiMAX-Direction = Bi-Directional
        WiMAX-QoS-Id = 1
        WiMAX-Media-Flow-Type = Robust-Browser
        WiMAX-Schedule-Type = Best-Effort
        WiMAX-Traffic-Priority = 0
        WiMAX-Maximum-Sustained-Traffic-Rate = 512000
        MS-CHAP2-Success = 
0xdf533d37443041423038393133393032414333353841304630414336383132453546434243364130323046
        MS-MPPE-Recv-Key = 0x1d7c9b57392b589e2849640bad969199
        MS-MPPE-Send-Key = 0x4aa107e5fa9573846af44d21c5080749
        MS-MPPE-Encryption-Policy = 0x00000001
        MS-MPPE-Encryption-Types = 0x00000006

and the one in the outer tunnel

Fri Apr  3 01:13:34 2009
        Packet-Type = Access-Accept
        MS-MPPE-Recv-Key = 
0x6b185c55d7785700e6f52c9ae0160945476aa4ab9e5b699dc6cffb5427c06395
        MS-MPPE-Send-Key = 
0x009d98e233e6911f97346381a77e90d01b7d41b3aa82dbf6ce56f54bb9b2598b
        EAP-MSK = 
0x6b185c55d7785700e6f52c9ae0160945476aa4ab9e5b699dc6cffb5427c06395009d98e233e6911f97346381a77e90d01b7d41b3aa82dbf6ce56f54bb9b2598b
        EAP-EMSK = 
0xc5f48626093f9313c5090254ffc375d4594bf6570025a260801e4b8d0ff852167d0748bd50b27d214b0ee67c1bbe1a4395faf094a8cb56663177fa8f32586f40
        EAP-Message = 0x03f00004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "00210400E0D7@test.fr"

I would like the reply of the outer tunnel to contain all the Wimax 
Attribute I got in the inner.

2. For some weird reason again, Alcatel ASN needs to receive two times 
the same attribute with differente value (Actually this 
WiMAX-QoS-Descriptor (TLV Attribute))
I guess this is not very compliant with RFC, but is there a way to send 
2 times the same attribute in the same reply.

I've tried that but without surprise this send only the first part of 
the attribute

cpe2-lab@test.fr Cleartext-Password := "xxx"
        WiMAX-Packet-Data-Flow-Id=1,
        WiMAX-Service-Data-Flow-Id=1,
        WiMAX-Service-Profile-Id=1,
        WiMAX-Direction=Bi-Directional,
        WiMAX-QoS-Id=01,
        WiMAX-Media-Flow-Type=Robust-Browser,
        WiMAX-Schedule-Type=BEST-EFFORT,
        WiMAX-Traffic-Priority=0,
        WiMAX-Maximum-Sustained-Traffic-Rate=512000,
        WiMAX-QoS-Id=02,
        WiMAX-Media-Flow-Type=Robust-Browser,
        WiMAX-Schedule-Type=BEST-EFFORT,
        WiMAX-Traffic-Priority=0,
        WiMAX-Maximum-Sustained-Traffic-Rate=512000

Maybe using perl module in the post-auth ?

Thanks

Thomas Fagart