Hard to know what you missconfigured but...i can give you some "usual suspects" maybe.. Also can you post a "show subscribers active all" while trying to auth. Also debug with Term mon debug aaa rad-attr debug rad-packet Your forward policy looks wicked Forward-Policy == "in:CLIPS-DEFAULT" are you sure that is the name of your forwarding policy? And if you are using netop make sure that this forwarding policy is the one in the database. Also double check that you have below Metering and policing on the router and that they are configured with the right rate and burst. Qos-Policing-Profile-Name = "customer-out" Qos-Metering-Profile-Name = "customer-in" Also if you are using netop check that you have those customer-out and customer-in in Netops service attribute Variation/bandwidth variation and that they point to existing valid customer-out and customer-in on the router. From the look of it from your reply attributes they should look like.. qos policy customer-out metering rate 20480 burst 100000 ! qos customer-in policing rate 2048 burst 10000 ! And of course make sure you have a context with the name "CLIPS" to bound the session to. And since i have never used below attributes in a SME before that makes me suspicious..Just make sure they aren't doing anything crazy:) Connect-Info == "1" Port-Limit == 1 Cheers Alex -----Ursprungligt meddelande----- Från: freeradius-users-bounces+alexander.silverohrt=itux.se@lists.freeradius.org [mailto:freeradius-users-bounces+alexander.silverohrt=itux.se@lists.freeradius.org] För Lukasz Kopiszka Skickat: den 4 april 2013 15:19 Till: freeradius-users@lists.freeradius.org Ämne: disconected after one second Hi, I have strange problem host can't receive IP becouse he get Acct-Status-Type = Stop Acct-Update-Reason = AAA_LOAD_ACCT_SESSION_DOWN after one second before: Acct-Status-Type = Start Acct-Update-Reason = AAA_LOAD_ACCT_SESSION_UP short log: Sending Access-Accept of id 126 to 91.231.70.5 port 1812 Service-Type = Outbound-User Framed-IP-Address == 91.231.71.17 Acct-Interim-Interval == 300 Service-Type == Outbound-User Connect-Info == "1" Port-Limit == 1 DHCP_Max_Leases == 1 Context-Name == "CLIPS" HTTP-Redirect-Profile-Name == "" Forward-Policy == "in:CLIPS-DEFAULT" QOS-Rate-Outbound == "20480" QOS-Rate-Inbound == "2048" Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Accounting-Request packet from host 91.231.70.5 port 1812, id=223, length=385 User-Name = "00:17:08:2e:76:d2" Acct-Status-Type = Start Acct-Session-Id = "0100FFFF7800029F-515D7656" Service-Type = Outbound-User Acct-Update-Reason = AAA_LOAD_ACCT_SESSION_UP NAS-Identifier = "ALFASYSTEM" NAS-Port = 33619968 NAS-Real-Port = 553649127 NAS-Port-Type = Virtual NAS-Port-Id = "2/1 vlan-id 999 clips 131743" Medium-Type = DSL Mac-Addr = "00-17-08-2e-76-d2" Platform-Type = SE-100 OS-Version = "6.5.1.5" Acct-Authentic = RADIUS Port-Limit = 1 DHCP-Max-Leases = 1 Framed-IP-Address = 91.231.71.17 Source-Validation = Enabled DHCP-Option = "\014\014\004alfa" Acct-Interim-Interval = 600 Forward-Policy = "in:CLIPS-DEFAULT" QOS-Rate-Outbound = "20480:0:0" QOS-Rate-Inbound = "2048:0:0" Qos-Policing-Profile-Name = "customer-out" Qos-Metering-Profile-Name = "customer-in" Event-Timestamp = "Apr 4 2013 14:47:18 CEST" << start rad_recv: Accounting-Request packet from host 91.231.70.5 port 1812, id=224, length=603 User-Name = "00:17:08:2e:76:d2" Acct-Status-Type = Stop Acct-Session-Id = "0100FFFF7800029F-515D7656" Service-Type = Outbound-User Acct-Update-Reason = AAA_LOAD_ACCT_SESSION_DOWN NAS-Identifier = "ALFASYSTEM" NAS-Port = 33619968 NAS-Real-Port = 553649127 NAS-Port-Type = Virtual NAS-Port-Id = "2/1 vlan-id 999 clips 131743" Medium-Type = DSL Mac-Addr = "00-17-08-2e-76-d2" Platform-Type = SE-100 OS-Version = "6.5.1.5" Acct-Authentic = RADIUS Port-Limit = 1 DHCP-Max-Leases = 1 Framed-IP-Address = 91.231.71.17 Source-Validation = Enabled DHCP-Option = "\014\014\004alfa" Acct-Session-Time = 1 Acct-Input-Packets = 0 Acct-Output-Packets = 0 Acct-Input-Octets = 0 Acct-Output-Octets = 0 Acct-Input-Gigawords = 0 Acct-Output-Gigawords = 0 Acct-Input-Packets-64 = 0x0000000000000000 Acct-Output-Packets-64 = 0x0000000000000000 Acct-Input-Octets-64 = 0x0000000000000000 Acct-Output-Octets-64 = 0x0000000000000000 Acct-Mcast-In-Packets = 0 Acct-Mcast-Out-Packets = 0 Acct-Mcast-In-Octets = 0 Acct-Mcast-Out-Octets = 0 Acct-Mcast-In-Packets-64 = 0x0000000000000000 Acct-Mcast-Out-Packets-64 = 0x0000000000000000 Acct-Mcast-In-Octets-64 = 0x0000000000000000 Acct-Mcast-Out-Octets-64 = 0x0000000000000000 Acct-Interim-Interval = 600 Forward-Policy = "in:CLIPS-DEFAULT" QOS-Rate-Outbound = "20480:0:0" QOS-Rate-Inbound = "2048:0:0" Qos-Policing-Profile-Name = "customer-out" Qos-Metering-Profile-Name = "customer-in" Event-Timestamp = "Apr 4 2013 14:47:19 CEST" << stop after 1 second! full log: http://pastebin.com/HTYxdg1B Everything was working great until I change something but I don't remember what was it -- Pozdrawiam, Łukasz Kopiszka tel. 694-212-718 www.alfa-system.pl - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ********* DISCLAIMER ********* This message and any attachment are confidential and may be privileged or otherwise protected from disclosure and may include proprietary information. If you are not the intended recipient, please telephone or email the sender and delete this message and any attachment from your system. If you are not the intended recipient you must not copy this message or attachment or disclose the contents to any other person