Hi, Thank you for your reply. I would like to highlight that I have checked that the switch and the radius server can ping each other. Moreover, they are on the same network and the routing also works. Hence, to me it does not seem like a network issue. I would greatly appreciate any further help in this regard. Thanks Again. ------------------------------------------------------------------------------------------- Best Regards, Rishabh On 2/12/2014 12:06 PM, Rishabh.Shukla wrote: ----- Forwarded Message ----- From: "HCC Mailing Lists" <hcc.lists@gmail.com> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Sent: Monday, February 10, 2014 8:25:59 PM Subject: RE: Radius Issue, No response from server I may be stating the obvious, but since you have done the configuration perfectly and the packets are not reaching the RADIUS server you might check the configuration of the switch and the network to make sure they can reach each other. <blockquote> -----Original Message----- From: freeradius-users- bounces+hcc.lists=gmail.com@lists.freeradius.org [ mailto:freeradius - users-bounces+hcc.lists=gmail.com@lists.freeradius.org ] On Behalf Of Rishabh.Shukla Sent: Monday, February 10, 2014 09:11 To: freeradius-users@lists.freeradius.org Cc: Hiren Patel; Ronak Shah Subject: Radius Issue, No response from server Hello, I have deployed radius server + daloradius + MySQL in centos 6 and all <blockquote> configuration is done perfectly. I have added HP ProCurve switch </blockquote> 3400 <blockquote> CL as my NAS for sending authentication requests. The scenarios is this: the server is responding and accepting the packets locally but when I try to authenticate through the HP ProCurve switch the server does not respond. I have also stopped the iptables services still radius server is not listening and during debug we found that the request is not even reaching radius server and moreover I am not getting any error message at all. I will be grateful if anybody can help me out to overcome this </blockquote> problem. <blockquote> Thanks and regards Rishabh. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html </blockquote> - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html </blockquote>