x03ml wrote:
i have a litle problem here. I setup freeradius to work with mysql and an access point together.
You are using a very old version of the server. You should upgrade to the latest version. ...
Ready to process requests.rad_recv: Access-Request packet from host 10.10.10.251:1812, id=61, length=71 User-Name = "x03" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000801783033
Which is an EAP request.
NAS-IP-Address = 10.10.10.251 Message-Authenticator = 0x85068ed9e75d7bde97669e3960e6342f Processing the authorize section of radiusd.conf
...
modcall: leaving group authorize (returns ok) for request 0
And there is no reference to the "eap" module. This reference exists in the default configuration even in older versions of the server. You have edited the default configuration, and broken it. Don't do that.
someone have a clue about this?
Upgrade to the latest version. Don't edit the configuration files too much.
thanks a lot
if i ask for a test with radtest from a computer in lan i get success,
Yes, because that's not an EAP request. Alan DeKok.