calling-station-id filtering with checkval

14 Dec 2008


      I see that the mac address from the calling-station-id but then it will not
login with the user.
If i delete the row 26 with calling-station-id it will permit that user to
login.

Please help

rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 7


mysql> select * from radcheck;
+----+------------+--------------------+----+-------------------+
| id | UserName   | Attribute          | op | Value             |
+----+------------+--------------------+----+-------------------+
| 25 | testuser | User-Password      | == |testpass|
| 26 | testuser | Calling-Station-Id | == |00-21-5c-7b-ff-2d|
+----+------------+--------------------+----+-------------------+
2 rows in set (0.00 sec)


rad_recv: Access-Request packet from host 10.254.0.1:6001, id=109,
length=142
        User-Name = "testuser"
        NAS-IP-Address = 192.168.200.50
        Called-Station-Id = "00-20-a6-64-7a-38:test"
        Calling-Station-Id = "00-21-5c-7b-ff-2d"
        NAS-Identifier = "testap"
        Framed-MTU = 1400
        NAS-Port = 2
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x0201000f016a77696c6c6935363436
        Message-Authenticator = 0xf2e55d0632d8ecd338a16f7fd5523106
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: EAP packet type response id 1 length 15
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
  modcall[authorize]: module "sql" returns ok for request 0
rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 109 to 10.254.0.1 port 6001
        EAP-Message = 0x010200061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x3d7a74c61baccd06a6da72f6137c2a3b
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.254.0.1:6001, id=110,
length=225
        User-Name = "testuser"
        NAS-IP-Address = 192.168.200.50
        Called-Station-Id = "00-20-a6-64-7a-38:test"
        Calling-Station-Id = "00-21-5c-7b-ff-2d"
        NAS-Identifier = "testap"
        State = 0x3d7a74c61baccd06a6da72f6137c2a3b
        Framed-MTU = 1400
        NAS-Port = 2
        NAS-Port-Type = Wireless-802.11
        EAP-Message =
0x0202005019800000004616030100410100003d0301494720b6f92efa4a7ea79b54e7adb7c31f53e46513e795facd9056b17b27b6eb00001600040005000a000900640062000300060013001200630100
        Message-Authenticator = 0xa12aca0fd57315e8de5b0a729a73f7b4
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 1
  rlm_eap: EAP packet type response id 2 length 80
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 1
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 3
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 3
  modcall[authorize]: module "sql" returns ok for request 1
rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11
    (other): before/accept initialization
    TLS_accept: before/accept initialization
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
    TLS_accept: SSLv3 read client hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
    TLS_accept: SSLv3 write server hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate
    TLS_accept: SSLv3 write certificate A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
    TLS_accept: SSLv3 write server done A
    TLS_accept: SSLv3 flush data
    TLS_accept:error in SSLv3 read client certificate A
rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
In SSL Handshake Phase
In SSL Accept mode
  eaptls_process returned 13
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group authenticate (returns handled) for request 1
Sending Access-Challenge of id 110 to 10.254.0.1 port 6001
        EAP-Message =
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
        EAP-Message =
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
        EAP-Message =
0x818d0030818902818100dac525422bfedb082629a2cba44b3449c90d0ab462fb72c8434a782098863d7eb7d7e70028c2b7ad555a51cc756cf4fa1d7091615ab450d5289553ae6616aff014a55085d6b8fb4aee98638e426175cdd36c665c63cda177d34920eb30585edc8773999c2980f81ad4638bbbea1c82d054023db7ef24a3ec1c3f6241a903d7f30203010001a317301530130603551d25040c300a06082b06010505070301300d06092a864886f70d0101040500038181007a2d921b1cf13bf2982a9178ec9ede6d88edc178a2e8bd40a0a06fb6f0769957884cd7084537083496fd184165293f583c8e8240eb68e042c94b15752e4c07e80d09
        EAP-Message =
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
        EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x04ed47a0de71a08bae722f88d6987218
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.254.0.1:6001, id=111,
length=151
        User-Name = "testuser"
        NAS-IP-Address = 192.168.200.50
        Called-Station-Id = "00-20-a6-64-7a-38:test"
        Calling-Station-Id = "00-21-5c-7b-ff-2d"
        NAS-Identifier = "testap"
        State = 0x04ed47a0de71a08bae722f88d6987218
        Framed-MTU = 1400
        NAS-Port = 2
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x020300061900
        Message-Authenticator = 0x7cce1dc07ea3c41fcb55ca62aa372bf2
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
  modcall[authorize]: module "preprocess" returns ok for request 2
  modcall[authorize]: module "mschap" returns noop for request 2
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 2
  rlm_eap: EAP packet type response id 3 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 2
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 2
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 2
  modcall[authorize]: module "sql" returns ok for request 2
rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 2
modcall: leaving group authorize (returns updated) for request 2
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake fragment handler
  eaptls_verify returned 1
  eaptls_process returned 13
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 2
modcall: leaving group authenticate (returns handled) for request 2
Sending Access-Challenge of id 111 to 10.254.0.1 port 6001
        EAP-Message =
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
        EAP-Message =
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
        EAP-Message =
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
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x431dbf66e9563ef6c0b3cdac58fd0e4d
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.254.0.1:6001, id=112,
length=337
        User-Name = "testuser"
        NAS-IP-Address = 192.168.200.50
        Called-Station-Id = "00-20-a6-64-7a-38:test"
        Calling-Station-Id = "00-21-5c-7b-ff-2d"
        NAS-Identifier = "testap"
        State = 0x431dbf66e9563ef6c0b3cdac58fd0e4d
        Framed-MTU = 1400
        NAS-Port = 2
        NAS-Port-Type = Wireless-802.11
        EAP-Message =
0x020400c01980000000b61603010086100000820080121e3c6a20b3f0fbfb2036283c70f54c14e73b14430c7c82a24866038a75c69bb91eac0b286b735b8666111e4e40621ac80ee1d0996b9a9ce768875ed5d7c0c45a75dbb004a6a5bcdb7ae44ef3921b11f7acd89fac2a413e4391a163c08fee4667758a748139e6d5b15f829bfe545b640a69948441aa050c7c1152881d0a0b801403010001011603010020e69c55647e4c5a4fd3cf2c7f702684ca9de05460f816f7347c0647821ebdf9c0
        Message-Authenticator = 0x4f024f2f7e3377b0a9622f3f859c0f9f
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
  modcall[authorize]: module "preprocess" returns ok for request 3
  modcall[authorize]: module "mschap" returns noop for request 3
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 3
  rlm_eap: EAP packet type response id 4 length 192
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 3
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 1
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 1
  modcall[authorize]: module "sql" returns ok for request 3
rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 3
modcall: leaving group authorize (returns updated) for request 3
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
    TLS_accept: SSLv3 read client key exchange A
  rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
    TLS_accept: SSLv3 read finished A
  rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
    TLS_accept: SSLv3 write change cipher spec A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
    TLS_accept: SSLv3 write finished A
    TLS_accept: SSLv3 flush data
    (other): SSL negotiation finished successfully
rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
SSL Connection Established
  eaptls_process returned 13
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 3
modcall: leaving group authenticate (returns handled) for request 3
Sending Access-Challenge of id 112 to 10.254.0.1 port 6001
        EAP-Message =
0x010500311900140301000101160301002095d66e5ab6a8eab6fadd4298805da0ee9e420234c498b39ce5ae4c3ac8232cc2
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0ee4a12a1ab84d7435dce6a6935a88a4
Finished request 3
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.254.0.1:6001, id=113,
length=151
        User-Name = "testuser"
        NAS-IP-Address = 192.168.200.50
        Called-Station-Id = "00-20-a6-64-7a-38:test"
        Calling-Station-Id = "00-21-5c-7b-ff-2d"
        NAS-Identifier = "testap"
        State = 0x0ee4a12a1ab84d7435dce6a6935a88a4
        Framed-MTU = 1400
        NAS-Port = 2
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x020500061900
        Message-Authenticator = 0x42d0e07d5e59f8d38baf59d71f5672e2
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
  modcall[authorize]: module "preprocess" returns ok for request 4
  modcall[authorize]: module "mschap" returns noop for request 4
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 4
  rlm_eap: EAP packet type response id 5 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 4
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 0
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 0
  modcall[authorize]: module "sql" returns ok for request 4
rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 4
modcall: leaving group authorize (returns updated) for request 4
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake is finished
  eaptls_verify returned 3
  eaptls_process returned 3
  rlm_eap_peap: EAPTLS_SUCCESS
  modcall[authenticate]: module "eap" returns handled for request 4
modcall: leaving group authenticate (returns handled) for request 4
Sending Access-Challenge of id 113 to 10.254.0.1 port 6001
        EAP-Message =
0x0106002019001703010015cfd1b627c3bf869d33564a058a9a317b0d49e8e682
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xde6481a2cbcb86cbfff8dea6911117da
Finished request 4
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.254.0.1:6001, id=114,
length=183
        User-Name = "testuser"
        NAS-IP-Address = 192.168.200.50
        Called-Station-Id = "00-20-a6-64-7a-38:test"
        Calling-Station-Id = "00-21-5c-7b-ff-2d"
        NAS-Identifier = "testap"
        State = 0xde6481a2cbcb86cbfff8dea6911117da
        Framed-MTU = 1400
        NAS-Port = 2
        NAS-Port-Type = Wireless-802.11
        EAP-Message =
0x020600261900170301001bcce8d4d055cbc691f1340e46621d5cabe5eddcc855f52cd3a13f88
        Message-Authenticator = 0x2b78b4114c8bffcb891aead7cf917457
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
  modcall[authorize]: module "preprocess" returns ok for request 5
  modcall[authorize]: module "mschap" returns noop for request 5
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 5
  rlm_eap: EAP packet type response id 6 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 5
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
  modcall[authorize]: module "sql" returns ok for request 5
rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 5
modcall: leaving group authorize (returns updated) for request 5
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Identity - testuser
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Got tunneled EAP-Message
        EAP-Message = 0x0206000f016a77696c6c6935363436
  PEAP: Got tunneled identity of testuser
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to testuser
  PEAP: Sending tunneled request
        EAP-Message = 0x0206000f016a77696c6c6935363436
        FreeRADIUS-Proxied-To = 127.0.0.1
        User-Name = "testuser"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
  modcall[authorize]: module "preprocess" returns ok for request 5
  modcall[authorize]: module "mschap" returns noop for request 5
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 5
  rlm_eap: EAP packet type response id 6 length 15
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 5
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 3
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 3
rlm_sql (sql): No matching entry in the database for request from user
[testuser]
  modcall[authorize]: module "sql" returns notfound for request 5
rlm_checkval: Could not find item named Calling-Station-Id in request
rlm_checkval: Could not find attribute named Calling-Station-Id in check
pairs
  modcall[authorize]: module "checkval" returns notfound for request 5
modcall: leaving group authorize (returns updated) for request 5
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
  rlm_eap: EAP Identity
  rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 5
modcall: leaving group authenticate (returns handled) for request 5
  PEAP: Got tunneled reply RADIUS code 11
        EAP-Message =
0x010700241a0107001f10dcab6769a85cba16a42fb47706453cbe6a77696c6c6935363436
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x68e17da0a9a400917769de0451579732
  PEAP: Processing from tunneled session code 0x8188f38 11
        EAP-Message =
0x010700241a0107001f10dcab6769a85cba16a42fb47706453cbe6a77696c6c6935363436
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x68e17da0a9a400917769de0451579732
  PEAP: Got tunneled Access-Challenge
  modcall[authenticate]: module "eap" returns handled for request 5
modcall: leaving group authenticate (returns handled) for request 5
Sending Access-Challenge of id 114 to 10.254.0.1 port 6001
        EAP-Message =
0x0107003b19001703010030aee484ac01a5a458cf552cf3c7aaf51cb06314433a871487e3d68c9e6f7dd9b20e50b7d8c4282d7120cec1f48fe0dee6
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x3c061f046a049d3c6e5a8010ac776fde
Finished request 5
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.254.0.1:6001, id=115,
length=237
        User-Name = "testuser"
        NAS-IP-Address = 192.168.200.50
        Called-Station-Id = "00-20-a6-64-7a-38:test"
        Calling-Station-Id = "00-21-5c-7b-ff-2d"
        NAS-Identifier = "testap"
        State = 0x3c061f046a049d3c6e5a8010ac776fde
        Framed-MTU = 1400
        NAS-Port = 2
        NAS-Port-Type = Wireless-802.11
        EAP-Message =
0x0207005c1900170301005181f86830de9489b959ba137783ac12d6d085883fb3dd21699611d12260f55b54402164084b309fe60a087e848b816bf48b8d712eadc6b38c708b58f8230dc0ca1925d44c06ff3b55902e7f3573164e8a2f
        Message-Authenticator = 0xebb532d259687d2da7be90fa77257950
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
  modcall[authorize]: module "preprocess" returns ok for request 6
  modcall[authorize]: module "mschap" returns noop for request 6
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 6
  rlm_eap: EAP packet type response id 7 length 92
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 6
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 2
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 2
  modcall[authorize]: module "sql" returns ok for request 6
rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 6
modcall: leaving group authorize (returns updated) for request 6
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: EAP type mschapv2
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Got tunneled EAP-Message
        EAP-Message =
0x020700451a02070040310fb1ca476eb5dd96914ce816dd8109bb00000000000000004485d3dd2f8f7d100c6f1696fa1149988ced9e732e04d840006a77696c6c6935363436
  PEAP: Setting User-Name to testuser
  PEAP: Adding old state with 68 e1
  PEAP: Sending tunneled request
        EAP-Message =
0x020700451a02070040310fb1ca476eb5dd96914ce816dd8109bb00000000000000004485d3dd2f8f7d100c6f1696fa1149988ced9e732e04d840006a77696c6c6935363436
        FreeRADIUS-Proxied-To = 127.0.0.1
        User-Name = "testuser"
        State = 0x68e17da0a9a400917769de0451579732
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
  modcall[authorize]: module "preprocess" returns ok for request 6
  modcall[authorize]: module "mschap" returns noop for request 6
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 6
  rlm_eap: EAP packet type response id 7 length 69
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 6
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 1
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 1
rlm_sql (sql): No matching entry in the database for request from user
[testuser]
  modcall[authorize]: module "sql" returns notfound for request 6
rlm_checkval: Could not find item named Calling-Station-Id in request
rlm_checkval: Could not find attribute named Calling-Station-Id in check
pairs
  modcall[authorize]: module "checkval" returns notfound for request 6
modcall: leaving group authorize (returns updated) for request 6
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/mschapv2
  rlm_eap: processing type mschapv2
  Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 6
  rlm_mschap: No User-Password configured.  Cannot create LM-Password.
  rlm_mschap: No User-Password configured.  Cannot create NT-Password.
  rlm_mschap: Told to do MS-CHAPv2 for testuser with NT-Password
  rlm_mschap: FAILED: No NT/LM-Password.  Cannot perform authentication.
  rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
  modcall[authenticate]: module "mschap" returns reject for request 6
modcall: leaving group MS-CHAP (returns reject) for request 6
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns reject for request 6
modcall: leaving group authenticate (returns reject) for request 6
auth: Failed to validate the user.
Login incorrect: [testuser/<no User-Password attribute>] (from client
localhost port 0)
  PEAP: Got tunneled reply RADIUS code 3
        MS-CHAP-Error = "\007E=691 R=1"
        EAP-Message = 0x04070004
        Message-Authenticator = 0x00000000000000000000000000000000
  PEAP: Processing from tunneled session code 0x81a7668 3
        MS-CHAP-Error = "\007E=691 R=1"
        EAP-Message = 0x04070004
        Message-Authenticator = 0x00000000000000000000000000000000
  PEAP: Tunneled authentication was rejected.
  rlm_eap_peap: FAILURE
  modcall[authenticate]: module "eap" returns handled for request 6
modcall: leaving group authenticate (returns handled) for request 6
Sending Access-Challenge of id 115 to 10.254.0.1 port 6001
        EAP-Message =
0x010800261900170301001bf8aa1a94ad4a2b0806614e7bead931ede68f144ac5809bbfaf1375
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xfd5c14aca3f5548e24c6e1e0a7b6b3cc
Finished request 6
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 10.254.0.1:6001, id=116,
length=183
        User-Name = "testuser"
        NAS-IP-Address = 192.168.200.50
        Called-Station-Id = "00-20-a6-64-7a-38:test"
        Calling-Station-Id = "00-21-5c-7b-ff-2d"
        NAS-Identifier = "testap"
        State = 0xfd5c14aca3f5548e24c6e1e0a7b6b3cc
        Framed-MTU = 1400
        NAS-Port = 2
        NAS-Port-Type = Wireless-802.11
        EAP-Message =
0x020800261900170301001bf6abd7a3bb6544d85a447f7ad16a9b7357761515db20de1cece78e
        Message-Authenticator = 0xdc013599dfdec1515ec553dd0afcfe88
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
  modcall[authorize]: module "preprocess" returns ok for request 7
  modcall[authorize]: module "mschap" returns noop for request 7
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 7
  rlm_eap: EAP packet type response id 8 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 7
radius_xlat:  'testuser'
rlm_sql (sql): sql_set_user escaped user --> 'testuser'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op FROM radcheck
WHERE Username = 'testuser';'
rlm_sql (sql): Reserving sql socket id: 0
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM
radreply           WHERE Username = 'testuser'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY 'testuser'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 0
  modcall[authorize]: module "sql" returns ok for request 7
rlm_checkval: Item Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
rlm_checkval: Value Name: Calling-Station-Id, Value: 00-21-5c-7b-ff-2d
  modcall[authorize]: module "checkval" returns ok for request 7
modcall: leaving group authorize (returns updated) for request 7
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Tunneled data is valid.
  rlm_eap_peap:  Had sent TLV failure.  User was rejcted rejected earlier in
this session.
 rlm_eap: Handler failed in EAP/peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 7
modcall: leaving group authenticate (returns invalid) for request 7
auth: Failed to validate the user.
Login incorrect: [testuser/<no User-Password attribute>] (from client
testwireless port 2 cli 00-21-5c-7b-ff-2d)
Delaying request 7 for 1 seconds
Finished request 7
Going to the next request
Waking up in 5 seconds...

-- 
Justin A Williams

calling-station-id filtering with checkval

Justin A. Williams