EAP-TLS debug warning message

27 Aug 2024

      Hi,

I've been tasked with implementing FreeRADIUS for wired and wireless
authentication using EAP-TLS.

I found it reasonably straight-forward to set up a working proof-of-concept
but would like to check one thing before getting it production ready.

When viewing the debug output, the following message displays as a warning
in yellow but does not seem to negatively affect the end user connection
flow:
...
Certificate chain - 1 intermediate CA cert(s) untrusted
To forbid these certificates see 'reject_unknown_intermediate_ca'
(TLS) untrusted certificate with depth [0] subject name /CN=
testdevice@domain.org
I wonder if this might be similar to the EAP-TLS issue that Rolf posted
earlier this month (
https://lists.freeradius.org/pipermail/freeradius-users/2024-August/104643.h...)
but the main difference I can see is that I have no intermediate CA in
play.

User certs are issued directly from a Test CA root (SCEPman). The server
cert is from a public CA. I also encountered the same issue when using the
bootstrap certs.

OS: RHEL 9.4
FreeRADIUS versions tested: 3.2.6-1.el9 (NetworkRADIUS repo) & the 3.0.x
RHEL version.
Hosting Platform: Azure (the UDP packet reordering feature has been enabled)
Test clients: Android 14, Windows 10/11, and eapol_test

Thank you for your assistance with this. I'll paste the full debug output
below with some substitutions for privacy.

Kind regards,
George

[root@xx-dev-radius-eus-01 certs]# radiusd -X
FreeRADIUS Version 3.2.6
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/totp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/eap-servicename
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/abfab-tr
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/rfc7542
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/servicename
main {
 security {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
        libdir = "/usr/lib64/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        proxy_dedup_window = 1
        cleanup_delay = 5
        max_requests = 16384
        max_fds = 512
        postauth_client_lost = no
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 0.000000
        status_server = yes
        require_message_authenticator = "auto"
        limit_proxy_state = "auto"
        allow_vulnerable_openssl = "no"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        nonblock = no
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client testclient1 {
        ipaddr = 1.2.3.4
        secret = <<< secret >>>
        virtual_server = "servicename"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Shared secret for client testclient1 is short, and likely can be broken by
an attacker.
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap-servicename
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.coa" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
        filename = "/etc/raddb/mods-config/attr_filter/coa"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
        utc = no
  }
  # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
  date wispr2date {
        format = "%Y-%m-%dT%H:%M:%S"
        utc = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        dates_as_integer = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
        filename = "/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/var/log/radius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/radius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_totp
  # Loading module "totp" from file /etc/raddb/mods-enabled/totp
  totp {
        time_step = 30
        otp_length = 6
        lookback_steps = 1
        lookback_interval = 30
        lookforward_steps = 0
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_eap
  # Loading module "eap-servicename" from file
/etc/raddb/mods-enabled/eap-servicename
  eap eap-servicename {
        default_eap_type = "tls"
        timer_expire = 60
        max_eap_type = 52
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
        dedup_key = ""
  }
  instantiate {
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/coa
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "totp" from file /etc/raddb/mods-enabled/totp
  # Instantiating module "eap-servicename" from file
/etc/raddb/mods-enabled/eap-servicename
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/etc/acme/connect.domain.net/key.pem"
        certificate_file = "/etc/acme/connect.domain.net/fullchain.pem"
        ca_file = "/etc/raddb/certs/ca.pem"
        fragment_size = 1024
        include_length = yes
        auto_chain = no
        check_crl = no
        check_all_crl = no
        ca_path_reload_interval = 0
        cipher_list = "HIGH"
        cipher_server_preference = no
        reject_unknown_intermediate_ca = no
        ecdh_curve = ""
        tls_max_version = "1.2"
        tls_min_version = "1.2"
    cache {
        enable = yes
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = yes
        override_cert_url = no
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server servicename { # from file /etc/raddb/sites-enabled/servicename
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server servicename
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
Listening on auth address * port 1812 bound to server servicename
Listening on acct address * port 1813 bound to server servicename
Listening on auth address :: port 1812 bound to server servicename
Listening on acct address :: port 1813 bound to server servicename
Listening on proxy address * port 49854
Listening on proxy address :: port 50665
Ready to process requests
(0) Received Access-Request Id 47 from 1.2.3.4:34278 to 10.0.0.4:1812
length 253
(0)   User-Name = "test1234@domain.org"
(0)   NAS-IP-Address = 192.168.44.12
(0)   NAS-Identifier = "E600-A16B02"
(0)   Called-Station-Id = "00-04-56-A1-6B-02:ET"
(0)   NAS-Port-Id = "ET"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   NAS-Port = 1
(0)   Calling-Station-Id = "E2-99-88-51-2A-A1"
(0)   Connect-Info = "CONNECT 54Mbps 802.11a"
(0)   Acct-Session-Id = "693ABFF4296F577A"
(0)   WLAN-Pairwise-Cipher = 1027076
(0)   WLAN-Group-Cipher = 1027076
(0)   WLAN-AKM-Suite = 1027073
(0)   WLAN-Group-Mgmt-Cipher = 1027078
(0)   Framed-MTU = 1400
(0)   EAP-Message =
0x02c9001e01746573743132333440636f6d706574656e7a2e6f72672e6e7a
(0)   Message-Authenticator = 0xea4b200a5de671a429e9546fb03bcd87
(0) # Executing section authorize from file
/etc/raddb/sites-enabled/servicename
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "domain.org" for User-Name = "
test1234@domain.org"
(0) suffix: No such realm "domain.org"
(0)     [suffix] = noop
(0) eap-servicename: Peer sent EAP Response (code 2) ID 201 length 30
(0) eap-servicename: EAP-Identity reply, returning 'ok' so we can
short-circuit the rest of authorize
(0)     [eap-servicename] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap-servicename
(0) # Executing group from file /etc/raddb/sites-enabled/servicename
(0)   authenticate {
(0) eap-servicename: Peer sent packet with method EAP Identity (1)
(0) eap-servicename: Calling submodule eap_tls to process data
(0) eap_tls: (TLS) TLS -Initiating new session
(0) eap_tls: (TLS) TLS - Setting verify mode to require certificate from
client
(0) eap-servicename: Sending EAP Request (code 1) ID 202 length 10
(0) eap-servicename: EAP session adding &reply:State = 0x15a54f0f156f4235
(0)     [eap-servicename] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/servicename
(0)   Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 1014
(0) Sent Access-Challenge Id 47 from 10.0.0.4:1812 to 1.2.3.4:34278 length
68
(0)   EAP-Message = 0x01ca000a0da000000000
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x15a54f0f156f423549e64d7d4c36d897
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 48 from 1.2.3.4:34278 to 10.0.0.4:1812
length 482
(1)   User-Name = "test1234@domain.org"
(1)   NAS-IP-Address = 192.168.44.12
(1)   NAS-Identifier = "E600-A16B02"
(1)   Called-Station-Id = "00-04-56-A1-6B-02:ET"
(1)   NAS-Port-Id = "ET"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   NAS-Port = 1
(1)   Calling-Station-Id = "E2-99-88-51-2A-A1"
(1)   Connect-Info = "CONNECT 54Mbps 802.11a"
(1)   Acct-Session-Id = "693ABFF4296F577A"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027073
(1)   WLAN-Group-Mgmt-Cipher = 1027078
(1)   Framed-MTU = 1400
(1)   EAP-Message =
0x02ca00f10d0016030100e6010000e2030344655eb8a7665dacee77220b890a78280ff40b74db678954531ec00b2113115320d6391a2680dff522f55a07f7c35ee7f02f181b7c907ebd50098737f45cddc0ec0024130113021303c02bc02fc02cc030cca9cca8c009c013c00ac014009c009d002f0035000a0100007500170000ff01000100000a00080006001d00170018000b00020100000500050100000000000d00140012040308040401050308050501080606010201003300260024001d0020349b6d33f3241d2ea911b7ba91d909cf1d63b2c0d34fcfa4e41f8b14c992646b002d00020101002b00050403040303
(1)   State = 0x15a54f0f156f423549e64d7d4c36d897
(1)   Message-Authenticator = 0x804a4bf48e97610ecfc391c332458376
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 1014
(1) # Executing section authorize from file
/etc/raddb/sites-enabled/servicename
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "domain.org" for User-Name = "
test1234@domain.org"
(1) suffix: No such realm "domain.org"
(1)     [suffix] = noop
(1) eap-servicename: Peer sent EAP Response (code 2) ID 202 length 241
(1) eap-servicename: No EAP Start, assuming it's an on-going EAP
conversation
(1)     [eap-servicename] = updated
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap-servicename
(1) # Executing group from file /etc/raddb/sites-enabled/servicename
(1)   authenticate {
(1) eap-servicename: Removing EAP session with state 0x15a54f0f156f4235
(1) eap-servicename: Previous EAP request found for state
0x15a54f0f156f4235, released from the list
(1) eap-servicename: Peer sent packet with method EAP TLS (13)
(1) eap-servicename: Calling submodule eap_tls to process data
(1) eap_tls: (TLS) EAP Got final fragment (235 bytes)
(1) eap_tls: WARNING: (TLS) EAP Total received record fragments (235
bytes), does not equal expected expected data length (0 bytes)
(1) eap_tls: (TLS) EAP Done initial handshake
(1) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
hello
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerHello
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
hello
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Certificate
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write key
exchange
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, CertificateRequest
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate request
(1) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
done
(1) eap_tls: (TLS) TLS - Server : Need to read more data: SSLv3/TLS write
server done
(1) eap_tls: (TLS) TLS - In Handshake Phase
(1) eap-servicename: Sending EAP Request (code 1) ID 203 length 1020
(1) eap-servicename: EAP session adding &reply:State = 0x15a54f0f146e4235
(1)     [eap-servicename] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/servicename
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 1014
(1)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(1) Sent Access-Challenge Id 48 from 10.0.0.4:1812 to 1.2.3.4:34278 length
1086
(1)   EAP-Message =
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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x15a54f0f146e423549e64d7d4c36d897
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 49 from 1.2.3.4:34278 to 10.0.0.4:1812
length 247
(2)   User-Name = "test1234@domain.org"
(2)   NAS-IP-Address = 192.168.44.12
(2)   NAS-Identifier = "E600-A16B02"
(2)   Called-Station-Id = "00-04-56-A1-6B-02:ET"
(2)   NAS-Port-Id = "ET"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   NAS-Port = 1
(2)   Calling-Station-Id = "E2-99-88-51-2A-A1"
(2)   Connect-Info = "CONNECT 54Mbps 802.11a"
(2)   Acct-Session-Id = "693ABFF4296F577A"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027073
(2)   WLAN-Group-Mgmt-Cipher = 1027078
(2)   Framed-MTU = 1400
(2)   EAP-Message = 0x02cb00060d00
(2)   State = 0x15a54f0f146e423549e64d7d4c36d897
(2)   Message-Authenticator = 0x19f1a691f13a725c00b4e54836ff78c2
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 1014
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(2) # Executing section authorize from file
/etc/raddb/sites-enabled/servicename
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "domain.org" for User-Name = "
test1234@domain.org"
(2) suffix: No such realm "domain.org"
(2)     [suffix] = noop
(2) eap-servicename: Peer sent EAP Response (code 2) ID 203 length 6
(2) eap-servicename: No EAP Start, assuming it's an on-going EAP
conversation
(2)     [eap-servicename] = updated
(2)     [files] = noop
(2)     [expiration] = noop
(2)     [logintime] = noop
(2)     [pap] = noop
(2)   } # authorize = updated
(2) Found Auth-Type = eap-servicename
(2) # Executing group from file /etc/raddb/sites-enabled/servicename
(2)   authenticate {
(2) eap-servicename: Removing EAP session with state 0x15a54f0f146e4235
(2) eap-servicename: Previous EAP request found for state
0x15a54f0f146e4235, released from the list
(2) eap-servicename: Peer sent packet with method EAP TLS (13)
(2) eap-servicename: Calling submodule eap_tls to process data
(2) eap_tls: (TLS) Peer ACKed our handshake fragment
(2) eap-servicename: Sending EAP Request (code 1) ID 204 length 1020
(2) eap-servicename: EAP session adding &reply:State = 0x15a54f0f17694235
(2)     [eap-servicename] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/servicename
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 1014
(2)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(2) Sent Access-Challenge Id 49 from 10.0.0.4:1812 to 1.2.3.4:34278 length
1086
(2)   EAP-Message =
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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x15a54f0f1769423549e64d7d4c36d897
(2) Finished request
Waking up in 4.8 seconds.
(3) Received Access-Request Id 50 from 1.2.3.4:34278 to 10.0.0.4:1812
length 247
(3)   User-Name = "test1234@domain.org"
(3)   NAS-IP-Address = 192.168.44.12
(3)   NAS-Identifier = "E600-A16B02"
(3)   Called-Station-Id = "00-04-56-A1-6B-02:ET"
(3)   NAS-Port-Id = "ET"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   NAS-Port = 1
(3)   Calling-Station-Id = "E2-99-88-51-2A-A1"
(3)   Connect-Info = "CONNECT 54Mbps 802.11a"
(3)   Acct-Session-Id = "693ABFF4296F577A"
(3)   WLAN-Pairwise-Cipher = 1027076
(3)   WLAN-Group-Cipher = 1027076
(3)   WLAN-AKM-Suite = 1027073
(3)   WLAN-Group-Mgmt-Cipher = 1027078
(3)   Framed-MTU = 1400
(3)   EAP-Message = 0x02cc00060d00
(3)   State = 0x15a54f0f1769423549e64d7d4c36d897
(3)   Message-Authenticator = 0x106ad3c09dd5229c69c77aaad34bef2c
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 1014
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(3) # Executing section authorize from file
/etc/raddb/sites-enabled/servicename
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "domain.org" for User-Name = "
test1234@domain.org"
(3) suffix: No such realm "domain.org"
(3)     [suffix] = noop
(3) eap-servicename: Peer sent EAP Response (code 2) ID 204 length 6
(3) eap-servicename: No EAP Start, assuming it's an on-going EAP
conversation
(3)     [eap-servicename] = updated
(3)     [files] = noop
(3)     [expiration] = noop
(3)     [logintime] = noop
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = eap-servicename
(3) # Executing group from file /etc/raddb/sites-enabled/servicename
(3)   authenticate {
(3) eap-servicename: Removing EAP session with state 0x15a54f0f17694235
(3) eap-servicename: Previous EAP request found for state
0x15a54f0f17694235, released from the list
(3) eap-servicename: Peer sent packet with method EAP TLS (13)
(3) eap-servicename: Calling submodule eap_tls to process data
(3) eap_tls: (TLS) Peer ACKed our handshake fragment
(3) eap-servicename: Sending EAP Request (code 1) ID 205 length 1020
(3) eap-servicename: EAP session adding &reply:State = 0x15a54f0f16684235
(3)     [eap-servicename] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/servicename
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 1014
(3)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(3) Sent Access-Challenge Id 50 from 10.0.0.4:1812 to 1.2.3.4:34278 length
1086
(3)   EAP-Message =
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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x15a54f0f1668423549e64d7d4c36d897
(3) Finished request
Waking up in 4.8 seconds.
(4) Received Access-Request Id 51 from 1.2.3.4:34278 to 10.0.0.4:1812
length 247
(4)   User-Name = "test1234@domain.org"
(4)   NAS-IP-Address = 192.168.44.12
(4)   NAS-Identifier = "E600-A16B02"
(4)   Called-Station-Id = "00-04-56-A1-6B-02:ET"
(4)   NAS-Port-Id = "ET"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   NAS-Port = 1
(4)   Calling-Station-Id = "E2-99-88-51-2A-A1"
(4)   Connect-Info = "CONNECT 54Mbps 802.11a"
(4)   Acct-Session-Id = "693ABFF4296F577A"
(4)   WLAN-Pairwise-Cipher = 1027076
(4)   WLAN-Group-Cipher = 1027076
(4)   WLAN-AKM-Suite = 1027073
(4)   WLAN-Group-Mgmt-Cipher = 1027078
(4)   Framed-MTU = 1400
(4)   EAP-Message = 0x02cd00060d00
(4)   State = 0x15a54f0f1668423549e64d7d4c36d897
(4)   Message-Authenticator = 0x086b69404a413776374c1648af478648
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 1014
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(4) # Executing section authorize from file
/etc/raddb/sites-enabled/servicename
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "domain.org" for User-Name = "
test1234@domain.org"
(4) suffix: No such realm "domain.org"
(4)     [suffix] = noop
(4) eap-servicename: Peer sent EAP Response (code 2) ID 205 length 6
(4) eap-servicename: No EAP Start, assuming it's an on-going EAP
conversation
(4)     [eap-servicename] = updated
(4)     [files] = noop
(4)     [expiration] = noop
(4)     [logintime] = noop
(4)     [pap] = noop
(4)   } # authorize = updated
(4) Found Auth-Type = eap-servicename
(4) # Executing group from file /etc/raddb/sites-enabled/servicename
(4)   authenticate {
(4) eap-servicename: Removing EAP session with state 0x15a54f0f16684235
(4) eap-servicename: Previous EAP request found for state
0x15a54f0f16684235, released from the list
(4) eap-servicename: Peer sent packet with method EAP TLS (13)
(4) eap-servicename: Calling submodule eap_tls to process data
(4) eap_tls: (TLS) Peer ACKed our handshake fragment
(4) eap-servicename: Sending EAP Request (code 1) ID 206 length 372
(4) eap-servicename: EAP session adding &reply:State = 0x15a54f0f116b4235
(4)     [eap-servicename] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/servicename
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 1014
(4)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(4) Sent Access-Challenge Id 51 from 10.0.0.4:1812 to 1.2.3.4:34278 length
432
(4)   EAP-Message =
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
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x15a54f0f116b423549e64d7d4c36d897
(4) Finished request
Waking up in 4.7 seconds.
(5) Received Access-Request Id 52 from 1.2.3.4:34278 to 10.0.0.4:1812
length 1659
(5)   User-Name = "test1234@domain.org"
(5)   NAS-IP-Address = 192.168.44.12
(5)   NAS-Identifier = "E600-A16B02"
(5)   Called-Station-Id = "00-04-56-A1-6B-02:ET"
(5)   NAS-Port-Id = "ET"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   NAS-Port = 1
(5)   Calling-Station-Id = "E2-99-88-51-2A-A1"
(5)   Connect-Info = "CONNECT 54Mbps 802.11a"
(5)   Acct-Session-Id = "693ABFF4296F577A"
(5)   WLAN-Pairwise-Cipher = 1027076
(5)   WLAN-Group-Cipher = 1027076
(5)   WLAN-AKM-Suite = 1027073
(5)   WLAN-Group-Mgmt-Cipher = 1027078
(5)   Framed-MTU = 1400
(5)   EAP-Message =
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
(5)   State = 0x15a54f0f116b423549e64d7d4c36d897
(5)   Message-Authenticator = 0xb6424d2d2443246c6cbc7fe58202ac89
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 1014
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(5) # Executing section authorize from file
/etc/raddb/sites-enabled/servicename
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "domain.org" for User-Name = "
test1234@domain.org"
(5) suffix: No such realm "domain.org"
(5)     [suffix] = noop
(5) eap-servicename: Peer sent EAP Response (code 2) ID 206 length 1408
(5) eap-servicename: No EAP Start, assuming it's an on-going EAP
conversation
(5)     [eap-servicename] = updated
(5)     [files] = noop
(5)     [expiration] = noop
(5)     [logintime] = noop
(5)     [pap] = noop
(5)   } # authorize = updated
(5) Found Auth-Type = eap-servicename
(5) # Executing group from file /etc/raddb/sites-enabled/servicename
(5)   authenticate {
(5) eap-servicename: Removing EAP session with state 0x15a54f0f116b4235
(5) eap-servicename: Previous EAP request found for state
0x15a54f0f116b4235, released from the list
(5) eap-servicename: Peer sent packet with method EAP TLS (13)
(5) eap-servicename: Calling submodule eap_tls to process data
(5) eap_tls: (TLS) EAP Peer says that the final record size will be 2308
bytes
(5) eap_tls: (TLS) EAP Expecting 2 fragments
(5) eap_tls: (TLS) EAP Got first TLS fragment (1398 bytes).  Peer says more
fragments will follow
(5) eap_tls: (TLS) EAP ACKing fragment, the peer should send more data.
(5) eap-servicename: Sending EAP Request (code 1) ID 207 length 6
(5) eap-servicename: EAP session adding &reply:State = 0x15a54f0f106a4235
(5)     [eap-servicename] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/servicename
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 1014
(5)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(5) Sent Access-Challenge Id 52 from 10.0.0.4:1812 to 1.2.3.4:34278 length
64
(5)   EAP-Message = 0x01cf00060d00
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x15a54f0f106a423549e64d7d4c36d897
(5) Finished request
Waking up in 4.6 seconds.
(6) Received Access-Request Id 53 from 1.2.3.4:34278 to 10.0.0.4:1812
length 1163
(6)   User-Name = "test1234@domain.org"
(6)   NAS-IP-Address = 192.168.44.12
(6)   NAS-Identifier = "E600-A16B02"
(6)   Called-Station-Id = "00-04-56-A1-6B-02:ET"
(6)   NAS-Port-Id = "ET"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   NAS-Port = 1
(6)   Calling-Station-Id = "E2-99-88-51-2A-A1"
(6)   Connect-Info = "CONNECT 54Mbps 802.11a"
(6)   Acct-Session-Id = "693ABFF4296F577A"
(6)   WLAN-Pairwise-Cipher = 1027076
(6)   WLAN-Group-Cipher = 1027076
(6)   WLAN-AKM-Suite = 1027073
(6)   WLAN-Group-Mgmt-Cipher = 1027078
(6)   Framed-MTU = 1400
(6)   EAP-Message =
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
(6)   State = 0x15a54f0f106a423549e64d7d4c36d897
(6)   Message-Authenticator = 0x47e9ae4c5eef6095dc69df9c7bb3027e
(6) Restoring &session-state
(6)   &session-state:Framed-MTU = 1014
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(6) # Executing section authorize from file
/etc/raddb/sites-enabled/servicename
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "domain.org" for User-Name = "
test1234@domain.org"
(6) suffix: No such realm "domain.org"
(6)     [suffix] = noop
(6) eap-servicename: Peer sent EAP Response (code 2) ID 207 length 916
(6) eap-servicename: No EAP Start, assuming it's an on-going EAP
conversation
(6)     [eap-servicename] = updated
(6)     [files] = noop
(6)     [expiration] = noop
(6)     [logintime] = noop
(6)     [pap] = noop
(6)   } # authorize = updated
(6) Found Auth-Type = eap-servicename
(6) # Executing group from file /etc/raddb/sites-enabled/servicename
(6)   authenticate {
(6) eap-servicename: Removing EAP session with state 0x15a54f0f106a4235
(6) eap-servicename: Previous EAP request found for state
0x15a54f0f106a4235, released from the list
(6) eap-servicename: Peer sent packet with method EAP TLS (13)
(6) eap-servicename: Calling submodule eap_tls to process data
(6) eap_tls: (TLS) EAP Done initial handshake
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
done
(6) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Certificate
(6) eap_tls: (TLS) TLS - Creating attributes from 2 certificate in chain
(6) eap_tls:   TLS-Cert-Serial := "1fd207b3bfa245ec9f1f630632d4c1a1"
(6) eap_tls:   TLS-Cert-Expiration := "340807045107Z"
(6) eap_tls:   TLS-Cert-Valid-Since := "240807044107Z"
(6) eap_tls:   TLS-Cert-Subject := "/O=Organisation
POC/OU=guid/CN=SCEPman-Root-CA-V1"
(6) eap_tls:   TLS-Cert-Issuer := "/O=Organisation
POC/OU=guid/CN=SCEPman-Root-CA-V1"
(6) eap_tls:   TLS-Cert-Common-Name := "SCEPman-Root-CA-V1"
(6) eap_tls: (TLS) TLS - Creating attributes from 1 certificate in chain
(6) eap_tls:   TLS-Client-Cert-Serial :=
"50c0804b19c3a25ccca19a49a87106af8b7e9ac5"
(6) eap_tls:   TLS-Client-Cert-Expiration := "260816093608Z"
(6) eap_tls:   TLS-Client-Cert-Valid-Since := "240815093608Z"
(6) eap_tls:   TLS-Client-Cert-Subject := "/CN=testdevice@domain.org"
(6) eap_tls:   TLS-Client-Cert-Issuer := "/O=Organisation
POC/OU=guid/CN=SCEPman-Root-CA-V1"
(6) eap_tls:   TLS-Client-Cert-Common-Name := "testdevice@domain.org"
(6) eap_tls:   TLS-Client-Cert-X509v3-Authority-Key-Identifier +=
"65:77:76:8A:D3:C0:8F:69:D0:06:7E:0E:E4:45:1C:C5:D1:02:D5:9E"
(6) eap_tls:   TLS-Client-Cert-X509v3-Subject-Key-Identifier +=
"52:6B:C1:99:FD:93:8F:DC:43:D1:54:18:46:C8:39:D0:AA:CD:8A:3C"
(6) eap_tls:   TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE"
(6) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client
Authentication"
(6) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.5.5.7.3.2"
Certificate chain - 1 intermediate CA cert(s) untrusted
To forbid these certificates see 'reject_unknown_intermediate_ca'
(TLS) untrusted certificate with depth [0] subject name /CN=
testdevice@domain.org
(6) eap_tls: Starting OCSP Request
(6) eap_tls: ocsp: Using responder URL "http://responderhost:80/ocsp"
        This Update: Aug 27 10:30:21 2024 GMT
        Next Update: Aug 27 10:40:21 2024 GMT
(6) eap_tls: ocsp: Cert status: good
(6) eap_tls: ocsp: Certificate is valid
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
certificate
(6) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client key
exchange
(6) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read
certificate verify
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read change
cipher spec
(6) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Finished
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read finished
(6) eap_tls: (TLS) TLS - send TLS 1.2 ChangeCipherSpec
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write change
cipher spec
(6) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Finished
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
(6) eap_tls: (TLS) TLS - Handshake state - SSL negotiation finished
successfully
(6) eap_tls: (TLS) TLS - Connection Established
(6) eap_tls:   TLS-Session-Cipher-Suite = "ECDHE-ECDSA-AES128-GCM-SHA256"
(6) eap_tls:   TLS-Session-Version = "TLS 1.2"
(6) eap-servicename: Sending EAP Request (code 1) ID 208 length 61
(6) eap-servicename: EAP session adding &reply:State = 0x15a54f0f13754235
(6)     [eap-servicename] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/raddb/sites-enabled/servicename
(6)   Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6)   Framed-MTU = 1014
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHello"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Certificate"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerKeyExchange"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
CertificateRequest"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
ServerHelloDone"
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
Certificate"
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
ClientKeyExchange"
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
CertificateVerify"
(6)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake,
Finished"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 ChangeCipherSpec"
(6)   TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake,
Finished"
(6)   TLS-Session-Cipher-Suite = "ECDHE-ECDSA-AES128-GCM-SHA256"
(6)   TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 53 from 10.0.0.4:1812 to 1.2.3.4:34278 length
119
(6)   EAP-Message =
0x01d0003d0d80000000331403030001011603030028c7b5378da3badfb666bf510993d417130f51b97e0ba9dd960e67a15924dac5c2c2f842aa9f5f9695
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x15a54f0f1375423549e64d7d4c36d897
(6) Finished request
Waking up in 3.2 seconds.
(7) Received Access-Request Id 54 from 1.2.3.4:34278 to 10.0.0.4:1812
length 247
(7)   User-Name = "test1234@domain.org"
(7)   NAS-IP-Address = 192.168.44.12
(7)   NAS-Identifier = "E600-A16B02"
(7)   Called-Station-Id = "00-04-56-A1-6B-02:ET"
(7)   NAS-Port-Id = "ET"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   NAS-Port = 1
(7)   Calling-Station-Id = "E2-99-88-51-2A-A1"
(7)   Connect-Info = "CONNECT 54Mbps 802.11a"
(7)   Acct-Session-Id = "693ABFF4296F577A"
(7)   WLAN-Pairwise-Cipher = 1027076
(7)   WLAN-Group-Cipher = 1027076
(7)   WLAN-AKM-Suite = 1027073
(7)   WLAN-Group-Mgmt-Cipher = 1027078
(7)   Framed-MTU = 1400
(7)   EAP-Message = 0x02d000060d00
(7)   State = 0x15a54f0f1375423549e64d7d4c36d897
(7)   Message-Authenticator = 0x6e7d1312ef6ce87a5b8df766fbdbf1db
(7) Restoring &session-state
(7)   &session-state:Framed-MTU = 1014
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHello"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2
Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2
Handshake, ClientKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2
Handshake, CertificateVerify"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2
Handshake, Finished"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
ChangeCipherSpec"
(7)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2
Handshake, Finished"
(7)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-ECDSA-AES128-GCM-SHA256"
(7)   &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file
/etc/raddb/sites-enabled/servicename
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "domain.org" for User-Name = "
test1234@domain.org"
(7) suffix: No such realm "domain.org"
(7)     [suffix] = noop
(7) eap-servicename: Peer sent EAP Response (code 2) ID 208 length 6
(7) eap-servicename: No EAP Start, assuming it's an on-going EAP
conversation
(7)     [eap-servicename] = updated
(7)     [files] = noop
(7)     [expiration] = noop
(7)     [logintime] = noop
(7)     [pap] = noop
(7)   } # authorize = updated
(7) Found Auth-Type = eap-servicename
(7) # Executing group from file /etc/raddb/sites-enabled/servicename
(7)   authenticate {
(7) eap-servicename: Removing EAP session with state 0x15a54f0f13754235
(7) eap-servicename: Previous EAP request found for state
0x15a54f0f13754235, released from the list
(7) eap-servicename: Peer sent packet with method EAP TLS (13)
(7) eap-servicename: Calling submodule eap_tls to process data
(7) eap_tls: (TLS) Peer ACKed our handshake fragment.  handshake is finished
(7) eap_tls: (TLS) cache - Setting up attributes for session resumption
(7) eap_tls:     caching EAP-Type = TLS
(7) eap_tls:     caching TLS-Cert-Serial :=
"1fd207b3bfa245ec9f1f630632d4c1a1"
(7) eap_tls:     caching TLS-Cert-Expiration := "340807045107Z"
(7) eap_tls:     caching TLS-Cert-Valid-Since := "240807044107Z"
(7) eap_tls:     caching TLS-Cert-Subject := "/O=Organisation
POC/OU=guid/CN=SCEPman-Root-CA-V1"
(7) eap_tls:     caching TLS-Cert-Issuer := "/O=Organisation
POC/OU=guid/CN=SCEPman-Root-CA-V1"
(7) eap_tls:     caching TLS-Cert-Common-Name := "SCEPman-Root-CA-V1"
(7) eap_tls:     caching TLS-Client-Cert-Serial :=
"50c0804b19c3a25ccca19a49a87106af8b7e9ac5"
(7) eap_tls:     caching TLS-Client-Cert-Expiration := "260816093608Z"
(7) eap_tls:     caching TLS-Client-Cert-Valid-Since := "240815093608Z"
(7) eap_tls:     caching TLS-Client-Cert-Subject := "/CN=
testdevice@domain.org"
(7) eap_tls:     caching TLS-Client-Cert-Issuer := "/O=Organisation
POC/OU=guid/CN=SCEPman-Root-CA-V1"
(7) eap_tls:     caching TLS-Client-Cert-Common-Name := "
testdevice@domain.org"
(7) eap_tls:     caching TLS-Client-Cert-X509v3-Authority-Key-Identifier +=
"65:77:76:8A:D3:C0:8F:69:D0:06:7E:0E:E4:45:1C:C5:D1:02:D5:9E"
(7) eap_tls:     caching TLS-Client-Cert-X509v3-Subject-Key-Identifier +=
"52:6B:C1:99:FD:93:8F:DC:43:D1:54:18:46:C8:39:D0:AA:CD:8A:3C"
(7) eap_tls:     caching TLS-Client-Cert-X509v3-Basic-Constraints +=
"CA:FALSE"
(7) eap_tls:     caching TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS
Web Client Authentication"
(7) eap_tls:     caching TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.5.5.7.3.2"
(7) eap_tls: Failed to find 'persist_dir' in TLS configuration.  Session
will not be cached on disk.
(7) eap-servicename: Sending EAP Success (code 3) ID 208 length 4
(7) eap-servicename: Freeing handler
(7)     [eap-servicename] = ok
(7)   } # authenticate = ok
(7) # Executing section post-auth from file
/etc/raddb/sites-enabled/servicename
(7)   post-auth {
(7)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {
(7)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name))  -> FALSE
(7)     update {
(7)       &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 1014
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.3
Handshake, ClientHello'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, ServerHello'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, Certificate'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, ServerKeyExchange'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, CertificateRequest'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, ServerHelloDone'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.2
Handshake, Certificate'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.2
Handshake, ClientKeyExchange'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.2
Handshake, CertificateVerify'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.2
Handshake, Finished'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
ChangeCipherSpec'
(7)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.2
Handshake, Finished'
(7)       &reply::TLS-Session-Cipher-Suite +=
&session-state:TLS-Session-Cipher-Suite[*] ->
'ECDHE-ECDSA-AES128-GCM-SHA256'
(7)       &reply::TLS-Session-Version +=
&session-state:TLS-Session-Version[*] -> 'TLS 1.2'
(7)     } # update = noop
(7)     [exec] = noop
(7)     policy remove_reply_message_if_eap {
(7)       if (&reply:EAP-Message && &reply:Reply-Message) {
(7)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(7)       else {
(7)         [noop] = noop
(7)       } # else = noop
(7)     } # policy remove_reply_message_if_eap = noop
(7)     if (EAP-Key-Name && &reply:EAP-Session-Id) {
(7)     if (EAP-Key-Name && &reply:EAP-Session-Id)  -> FALSE
(7)   } # post-auth = noop
(7) Sent Access-Accept Id 54 from 10.0.0.4:1812 to 1.2.3.4:34278 length 193
(7)   MS-MPPE-Recv-Key =
0x422eeba9c721d957df374175733b5f81ce4a645cf75a94d717bf620b2f2e5210
(7)   MS-MPPE-Send-Key =
0x1a003c5f46f72a2705a522f099e4fc851b12c727805af41e87bd400a6d73557c
(7)   EAP-Message = 0x03d00004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   User-Name = "test1234@domain.org"
(7)   Framed-MTU += 1014
(7) Finished request
Waking up in 3.2 seconds.
(0) Cleaning up request packet ID 47 with timestamp +60 due to
cleanup_delay was reached
(1) Cleaning up request packet ID 48 with timestamp +60 due to
cleanup_delay was reached
(2) Cleaning up request packet ID 49 with timestamp +60 due to
cleanup_delay was reached
(3) Cleaning up request packet ID 50 with timestamp +60 due to
cleanup_delay was reached
(4) Cleaning up request packet ID 51 with timestamp +60 due to
cleanup_delay was reached
(5) Cleaning up request packet ID 52 with timestamp +60 due to
cleanup_delay was reached
Waking up in 1.3 seconds.
(6) Cleaning up request packet ID 53 with timestamp +60 due to
cleanup_delay was reached
(7) Cleaning up request packet ID 54 with timestamp +62 due to
cleanup_delay was reached
Ready to process requests

EAP-TLS debug warning message

George Benjin