Well no. start from basics: http://wiki.freeradius.org/guide/Getting%20Started and try to find out how radius works. or else you need toi find commercial support. this is just a mailing list. Eero On Mon, Jan 28, 2019 at 10:35 AM Soklang Sum <soklang.sum@cambotech.com> wrote:
Dear Eero Volotinen,
Can you help to remote for check exactly problem via team viewer?
You just reply ok, I will send you the teamviewer ID and password to you.
Thank
*From:* Eero Volotinen <eero.volotinen@iki.fi> *Sent:* Monday, January 28, 2019 3:27 PM *To:* Soklang Sum <soklang.sum@cambotech.com> *Cc:* FreeRadius users mailing list <freeradius-users@lists.freeradius.org
*Subject:* Re: Freeradius-Users Digest, Vol 165, Issue 71
as I said. you need to add debug into pam file and then check out the logs.
Eero
On Mon, Jan 28, 2019, 10:24 Soklang Sum <soklang.sum@cambotech.com wrote:
When I enable *DEFAULT Auth-Type := PAM*
(1) Cleaning up request packet ID 33 with timestamp +42
Ready to process requests
(2) Received Access-Request Id 34 from 172.26.10.34:58306 to 172.24.0.10:1812 length 48
(2) User-Name = "soklangs"
(2) User-Password = "soklangs@123"
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/) </@(.+)%5C.(.+)$/)>) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/) </@(.+)%5C.(.+)$/)>) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "soklangs", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: No EAP-Message, not doing EAP
(2) [eap] = noop
(2) files: users: Matched entry DEFAULT at line 70
(2) [files] = ok
(2) sql: EXPAND %{User-Name}
(2) sql: --> soklangs
(2) sql: SQL-User-Name set to 'soklangs'
rlm_sql (sql): Reserved connection (0)
(2) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(2) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'soklangs' ORDER BY id
(2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'soklangs' ORDER BY id
(2) sql: User found in radcheck table
(2) sql: Conditional check items matched, merging assignment check items
(2) sql: Cleartext-Password := "soklangs@123"
(2) sql: Cisco-AVPair := "shell:priv-lvl=15"
(2) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(2) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'soklangs' ORDER BY id
(2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'soklangs' ORDER BY id
(2) sql: User found in radreply table, merging reply items
(2) sql: Huawei-Exec-Privilege := 15
(2) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(2) sql: --> SELECT groupname FROM radusergroup WHERE username = 'soklangs' ORDER BY priority
(2) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'soklangs' ORDER BY priority
(2) sql: User not found in any groups
rlm_sql (sql): Released connection (0)
Need 2 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (8), 1 of 24 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 10.3.11-MariaDB, protocol version 10
(2) [sql] = ok
(2) [expiration] = noop
(2) [logintime] = noop
(2) pap: WARNING: Auth-Type already set. Not setting to PAP
(2) [pap] = noop
(2) } # authorize = ok
(2) Found Auth-Type = pam
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) authenticate {
(2) pam: Using pamauth string "radiusd" for pam.conf lookup
(2) pam: ERROR: pam_authenticate failed: Authentication failure
(2) [pam] = reject
(2) } # authenticate = reject
(2) Failed to authenticate the user
(2) Login incorrect (pam: pam_authenticate failed: Authentication failure): [soklangs/soklangs@123] (from client WIFI_NET1E port 0)
(2) Using Post-Auth-Type Reject
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) Post-Auth-Type REJECT {
(2) sql: EXPAND .query
(2) sql: --> .query
(2) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (5)
(2) sql: EXPAND %{User-Name}
(2) sql: --> soklangs
(2) sql: SQL-User-Name set to 'soklangs'
(2) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
(2) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'soklangs', 'soklangs@123', 'Access-Reject', '2019-01-28 15:21:06.239574')
(2) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'soklangs', 'soklangs@123', 'Access-Reject', '2019-01-28 15:21:06.239574')
(2) sql: SQL query returned: success
(2) sql: 1 record(s) updated
rlm_sql (sql): Released connection (5)
(2) [sql] = ok
(2) attr_filter.access_reject: EXPAND %{User-Name}
(2) attr_filter.access_reject: --> soklangs
(2) attr_filter.access_reject: Matched entry DEFAULT at line 11
(2) [attr_filter.access_reject] = updated
(2) [eap] = noop
(2) policy remove_reply_message_if_eap {
(2) if (&reply:EAP-Message && &reply:Reply-Message) {
(2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(2) else {
(2) [noop] = noop
(2) } # else = noop
(2) } # policy remove_reply_message_if_eap = noop
(2) } # Post-Auth-Type REJECT = updated
(2) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(2) Sending delayed response
(2) Sent Access-Reject Id 34 from 172.24.0.10:1812 to 172.26.10.34:58306 length 20
Waking up in 3.9 seconds.
(2) Cleaning up request packet ID 34 with timestamp +58
Ready to process requests
*Then try with google authentication code:*
(4) Received Access-Request Id 36 from 172.26.10.34:56134 to 172.24.0.10:1812 length 64
(4) User-Name = "soklangs"
(4) User-Password = "soklangs@123730510"
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/) </@(.+)%5C.(.+)$/)>) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/) </@(.+)%5C.(.+)$/)>) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "soklangs", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: No EAP-Message, not doing EAP
(4) [eap] = noop
(4) files: users: Matched entry DEFAULT at line 70
(4) [files] = ok
(4) sql: EXPAND %{User-Name}
(4) sql: --> soklangs
(4) sql: SQL-User-Name set to 'soklangs'
rlm_sql (sql): Reserved connection (10)
(4) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(4) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'soklangs' ORDER BY id
(4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'soklangs' ORDER BY id
(4) sql: User found in radcheck table
(4) sql: Conditional check items matched, merging assignment check items
(4) sql: Cleartext-Password := "soklangs@123"
(4) sql: Cisco-AVPair := "shell:priv-lvl=15"
(4) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(4) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'soklangs' ORDER BY id
(4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'soklangs' ORDER BY id
(4) sql: User found in radreply table, merging reply items
(4) sql: Huawei-Exec-Privilege := 15
(4) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(4) sql: --> SELECT groupname FROM radusergroup WHERE username = 'soklangs' ORDER BY priority
(4) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'soklangs' ORDER BY priority
(4) sql: User not found in any groups
rlm_sql (sql): Released connection (10)
Need 7 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (12), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 10.3.11-MariaDB, protocol version 10
(4) [sql] = ok
(4) [expiration] = noop
(4) [logintime] = noop
(4) pap: WARNING: Auth-Type already set. Not setting to PAP
(4) [pap] = noop
(4) } # authorize = ok
(4) Found Auth-Type = pam
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) authenticate {
(4) pam: Using pamauth string "radiusd" for pam.conf lookup
(4) pam: ERROR: pam_authenticate failed: Authentication failure
(4) [pam] = reject
(4) } # authenticate = reject
(4) Failed to authenticate the user
(4) Login incorrect (pam: pam_authenticate failed: Authentication failure): [soklangs/soklangs@123730510] (from client WIFI_NET1E port 0)
(4) Using Post-Auth-Type Reject
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) Post-Auth-Type REJECT {
(4) sql: EXPAND .query
(4) sql: --> .query
(4) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (9)
(4) sql: EXPAND %{User-Name}
(4) sql: --> soklangs
(4) sql: SQL-User-Name set to 'soklangs'
(4) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
(4) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'soklangs', 'soklangs@123730510', 'Access-Reject', '2019-01-28 15:23:37.491389')
(4) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'soklangs', 'soklangs@123730510', 'Access-Reject', '2019-01-28 15:23:37.491389')
(4) sql: SQL query returned: success
(4) sql: 1 record(s) updated
rlm_sql (sql): Released connection (9)
Need 6 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (13), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 10.3.11-MariaDB, protocol version 10
(4) [sql] = ok
(4) attr_filter.access_reject: EXPAND %{User-Name}
(4) attr_filter.access_reject: --> soklangs
(4) attr_filter.access_reject: Matched entry DEFAULT at line 11
(4) [attr_filter.access_reject] = updated
(4) [eap] = noop
(4) policy remove_reply_message_if_eap {
(4) if (&reply:EAP-Message && &reply:Reply-Message) {
(4) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(4) else {
(4) [noop] = noop
(4) } # else = noop
(4) } # policy remove_reply_message_if_eap = noop
(4) } # Post-Auth-Type REJECT = updated
(4) Delaying response for 1.000000 seconds
Waking up in 0.9 seconds.
(4) Sending delayed response
(4) Sent Access-Reject Id 36 from 172.24.0.10:1812 to 172.26.10.34:56134 length 20
Waking up in 3.9 seconds.
(4) Cleaning up request packet ID 36 with timestamp +209
Ready to process requests
===============================================================================
*From:* Eero Volotinen <eero.volotinen@iki.fi> *Sent:* Monday, January 28, 2019 3:11 PM *To:* Soklang Sum <soklang.sum@cambotech.com> *Cc:* FreeRadius users mailing list <freeradius-users@lists.freeradius.org
*Subject:* Re: Freeradius-Users Digest, Vol 165, Issue 71
You need to keep line * DEFAULT Auth-Type := PAM active or else it won't authenticate from pam.*
*Try basic stuff first: configure radius working with pam authentication ("password") and after*
*that try to add google authenticator*
*Eero*
On Mon, Jan 28, 2019 at 10:07 AM Soklang Sum <soklang.sum@cambotech.com> wrote:
*Dear Eero Volotinen,*
*I have command out follow:*
*# DEFAULT Group == "disabled", Auth-Type := Reject# Reply-Message = "Your account has been disabled."# DEFAULT Auth-Type := PAM*
*And keep the pam enable in the config. For the link that you mention I have already did but didn’t work.*
*For debugs my username and password is correct.*
(2) Received Access-Request Id 30 from 172.26.10.34:57689 to 172.24.0.10:1812 length 48
(2) User-Name = "soklangs"
(2) User-Password = "soklangs@123"
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/) </@(.+)%5C.(.+)$/)>) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/) </@(.+)%5C.(.+)$/)>) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "soklangs", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: No EAP-Message, not doing EAP
(2) [eap] = noop
(2) [files] = noop
(2) sql: EXPAND %{User-Name}
(2) sql: --> soklangs
(2) sql: SQL-User-Name set to 'soklangs'
rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 423 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 423 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 417 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (6): Hit idle_timeout, was idle for 417 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 417 seconds
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 380 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (7): Hit idle_timeout, was idle for 380 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 380 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare"
rlm_sql (sql): Opening additional connection (8), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 10.3.11-MariaDB, protocol version 10
rlm_sql (sql): Reserved connection (8)
(2) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(2) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'soklangs' ORDER BY id
(2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'soklangs' ORDER BY id
(2) sql: User found in radcheck table
(2) sql: Conditional check items matched, merging assignment check items
(2) sql: Cleartext-Password := "soklangs@123"
(2) sql: Cisco-AVPair := "shell:priv-lvl=15"
(2) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(2) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'soklangs' ORDER BY id
(2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'soklangs' ORDER BY id
(2) sql: User found in radreply table, merging reply items
(2) sql: Huawei-Exec-Privilege := 15
(2) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(2) sql: --> SELECT groupname FROM radusergroup WHERE username = 'soklangs' ORDER BY priority
(2) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'soklangs' ORDER BY priority
(2) sql: User not found in any groups
rlm_sql (sql): Released connection (8)
Need 2 more connections to reach min connections (3)
rlm_sql (sql): Opening additional connection (9), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 10.3.11-MariaDB, protocol version 10
(2) [sql] = ok
(2) [expiration] = noop
(2) [logintime] = noop
(2) [pap] = updated
(2) } # authorize = updated
(2) Found Auth-Type = PAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) Auth-Type PAP {
(2) pap: Login attempt with password
(2) pap: Comparing with "known good" Cleartext-Password
(2) pap: User authenticated successfully
(2) [pap] = ok
(2) } # Auth-Type PAP = ok
(2) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(2) post-auth {
(2) update {
(2) No attributes updated
(2) } # update = noop
(2) sql: EXPAND .query
(2) sql: --> .query
(2) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (8)
(2) sql: EXPAND %{User-Name}
(2) sql: --> soklangs
(2) sql: SQL-User-Name set to 'soklangs'
(2) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
(2) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'soklangs', 'soklangs@123', 'Access-Accept', '2019-01-28 15:05:33.972795')
(2) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'soklangs', 'soklangs@123', 'Access-Accept', '2019-01-28 15:05:33.972795')
(2) sql: SQL query returned: success
(2) sql: 1 record(s) updated
rlm_sql (sql): Released connection (8)
(2) [sql] = ok
(2) [exec] = noop
(2) policy remove_reply_message_if_eap {
(2) if (&reply:EAP-Message && &reply:Reply-Message) {
(2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(2) else {
(2) [noop] = noop
(2) } # else = noop
(2) } # policy remove_reply_message_if_eap = noop
(2) } # post-auth = ok
(2) Login OK: [soklangs/soklangs@123] (from client WIFI_NET1E port 0)
(2) Sent Access-Accept Id 30 from 172.24.0.10:1812 to 172.26.10.34:57689 length 0
(2) Huawei-Exec-Privilege = 15
(2) Finished request
Waking up in 4.9 seconds.
*And then I try with google authentication code is :*
(2) Cleaning up request packet ID 30 with timestamp +423
Ready to process requests
(3) Received Access-Request Id 31 from 172.26.10.34:49579 to 172.24.0.10:1812 length 64
(3) User-Name = "soklangs"
(3) User-Password = "soklangs@123021281"
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/) </@(.+)%5C.(.+)$/)>) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/) </@(.+)%5C.(.+)$/)>) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "soklangs", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: No EAP-Message, not doing EAP
(3) [eap] = noop
(3) [files] = noop
(3) sql: EXPAND %{User-Name}
(3) sql: --> soklangs
(3) sql: SQL-User-Name set to 'soklangs'
rlm_sql (sql): Closing connection (9): Hit idle_timeout, was idle for 97 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing connection (8): Hit idle_timeout, was idle for 97 seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare"
rlm_sql (sql): Opening additional connection (10), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 10.3.11-MariaDB, protocol version 10
rlm_sql (sql): Reserved connection (10)
(3) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(3) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'soklangs' ORDER BY id
(3) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'soklangs' ORDER BY id
(3) sql: User found in radcheck table
(3) sql: Conditional check items matched, merging assignment check items
(3) sql: Cleartext-Password := "soklangs@123"
(3) sql: Cisco-AVPair := "shell:priv-lvl=15"
(3) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(3) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'soklangs' ORDER BY id
(3) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'soklangs' ORDER BY id
(3) sql: User found in radreply table, merging reply items
(3) sql: Huawei-Exec-Privilege := 15
(3) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(3) sql: --> SELECT groupname FROM radusergroup WHERE username = 'soklangs' ORDER BY priority
(3) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'soklangs' ORDER BY priority
(3) sql: User not found in any groups
rlm_sql (sql): Released connection (10)
Need 2 more connections to reach min connections (3)
rlm_sql (sql): Opening additional connection (11), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 10.3.11-MariaDB, protocol version 10
(3) [sql] = ok
(3) [expiration] = noop
(3) [logintime] = noop
(3) [pap] = updated
(3) } # authorize = updated
(3) Found Auth-Type = PAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) Auth-Type PAP {
(3) pap: Login attempt with password
(3) pap: Comparing with "known good" Cleartext-Password
(3) pap: ERROR: Cleartext password "soklangs@123021281" does not match "known good" password
(3) pap: Passwords don't match
(3) [pap] = reject
(3) } # Auth-Type PAP = reject
(3) Failed to authenticate the user
(3) Login incorrect (pap: Cleartext password "soklangs@123021281" does not match "known good" password): [soklangs/soklangs@123021281] (from client WIFI_NET1E port 0)
(3) Using Post-Auth-Type Reject
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) Post-Auth-Type REJECT {
(3) sql: EXPAND .query
(3) sql: --> .query
(3) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (10)
(3) sql: EXPAND %{User-Name}
(3) sql: --> soklangs
(3) sql: SQL-User-Name set to 'soklangs'
(3) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
(3) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'soklangs', 'soklangs@123021281', 'Access-Reject', '2019-01-28 15:07:10.600741')
(3) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'soklangs', 'soklangs@123021281', 'Access-Reject', '2019-01-28 15:07:10.600741')
(3) sql: SQL query returned: success
(3) sql: 1 record(s) updated
rlm_sql (sql): Released connection (10)
(3) [sql] = ok
(3) attr_filter.access_reject: EXPAND %{User-Name}
(3) attr_filter.access_reject: --> soklangs
(3) attr_filter.access_reject: Matched entry DEFAULT at line 11
(3) [attr_filter.access_reject] = updated
(3) [eap] = noop
(3) policy remove_reply_message_if_eap {
(3) if (&reply:EAP-Message && &reply:Reply-Message) {
(3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(3) else {
(3) [noop] = noop
(3) } # else = noop
(3) } # policy remove_reply_message_if_eap = noop
(3) } # Post-Auth-Type REJECT = updated
(3) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(3) Sending delayed response
(3) Sent Access-Reject Id 31 from 172.24.0.10:1812 to 172.26.10.34:49579 length 20
Waking up in 3.9 seconds.
(3) Cleaning up request packet ID 31 with timestamp +520
Ready to process requests
*From:* Eero Volotinen <eero.volotinen@iki.fi> *Sent:* Monday, January 28, 2019 2:49 PM *To:* FreeRadius users mailing list <freeradius-users@lists.freeradius.org>; soklang.sum@cambotech.com *Subject:* Re: Freeradius-Users Digest, Vol 165, Issue 71
Well. try removing this:
try removing this line
DEFAULT Group == "disabled", Auth-Type := Reject Reply-Message = "Your account has been disabled."
and keep that pam line in config file..
Check that user password is correct and add some more debug to pam_google authenticator line like adding debug *) switch to it and then check out pam logging..
https://github.com/google/google-authenticator-libpam/blob/master/man/pam_go...
Eero
On Mon, Jan 28, 2019 at 9:37 AM Soklang Sum <soklang.sum@cambotech.com> wrote:
Dear Eero Volotinen,
Can you give me more details the guide its work or link preference how to do it?
My problem in this step:
# vi /etc/raddb/users DEFAULT Group == "disabled", Auth-Type := Reject Reply-Message = "Your account has been disabled." DEFAULT Auth-Type := PAM
When I enable the step as mention above, it always rejected.
This is RADIUS Debugs in my attachment file.
-----Original Message----- From: Freeradius-Users <freeradius-users-bounces+soklang.sum= cambotech.com@lists.freeradius.org> On Behalf Of freeradius-users-request@lists.freeradius.org Sent: Monday, January 28, 2019 2:13 PM To: freeradius-users@lists.freeradius.org Subject: Freeradius-Users Digest, Vol 165, Issue 71
Send Freeradius-Users mailing list submissions to freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request@lists.freeradius.org
You can reach the person managing the list at freeradius-users-owner@lists.freeradius.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Re: Contents of Freeradius-Users digest...Google Authenticator (Eero Volotinen)
----------------------------------------------------------------------
Message: 1 Date: Mon, 28 Jan 2019 09:12:17 +0200 From: Eero Volotinen <eero.volotinen@iki.fi> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org>, soklang.sum@cambotech.com Subject: Re: Contents of Freeradius-Users digest...Google Authenticator Message-ID: <CABzZrXdo9ExvdiNDjo5485NKnjp= QfaZfwhU+GdMVO7V9i592g@mail.gmail.com> Content-Type: text/plain; charset="UTF-8"
works fine. remember to run freeradius as root or else it cannot access google authenticator files
Eero
On Mon, Jan 28, 2019, 09:09 Soklang Sum <soklang.sum@cambotech.com wrote:
Dear Team Freeradius,
I would like to ask about FreeRADIUS work with google authenticator (2FA) or not? I have tried to install freeRADIUS with google authenticator but it doesn't work, when I try install following the guideline any website like https://networkjutsu.com/freeradius-google-authenticator/ it always rejected.
So that why I want to make sure from team expertise freeRADIUS it work with google authenticator or not?
But I saw in the guideline it works but for me never work.
Please help feedback soon as possible.
Thanks
-----Original Message----- From: Freeradius-Users <freeradius-users-bounces+soklang.sum= cambotech.com@lists.freeradius.org> On Behalf Of freeradius-users-request@lists.freeradius.org Sent: Monday, January 28, 2019 11:42 AM To: freeradius-users@lists.freeradius.org Subject: Freeradius-Users Digest, Vol 165, Issue 69
Send Freeradius-Users mailing list submissions to freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request@lists.freeradius.org
You can reach the person managing the list at freeradius-users-owner@lists.freeradius.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. EAP-GTC w/ "PAP-like" LDAP authentication (Ian Pilcher) 2. Re: EAP-GTC w/ "PAP-like" LDAP authentication (Alan DeKok) 3. Multiple UserDN for different LDAPs (diego.barzon@tiscali.it) 4. Freeradius-Users Digest, Vol 165, Issue 68 (Soklang Sum) 5. radius accounting issue. (slnarayanan@nitt.edu)
----------------------------------------------------------------------
Message: 1 Date: Sun, 27 Jan 2019 11:43:12 -0600 From: Ian Pilcher <arequipeno@gmail.com> To: freeradius-users@lists.freeradius.org Subject: EAP-GTC w/ "PAP-like" LDAP authentication Message-ID: <q2kqjg$4fa3$1@blaine.gmane.org> Content-Type: text/plain; charset=utf-8; format=flowed
I am struggling to find documentation of how to set up $SUBJECT.
I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC using a file-based test user, but the number of different protocols and configurations supported and documented in the config files means that I haven't been able to figure out how to achieve what I want.
Any hints, links, etc. would be appreciated.
Thanks!
-- ======================================================================== Ian Pilcher arequipeno@gmail.com -------- "I grew up before Mark Zuckerberg invented friendship" -------- ====================================================================== ==
------------------------------
Message: 2 Date: Sun, 27 Jan 2019 14:17:58 -0500 From: Alan DeKok <aland@deployingradius.com> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: EAP-GTC w/ "PAP-like" LDAP authentication Message-ID: <165EB1A7-2D19-4AAD-BD48-719D157BC5C5@deployingradius.com> Content-Type: text/plain; charset=us-ascii
On Jan 27, 2019, at 12:43 PM, Ian Pilcher <arequipeno@gmail.com> wrote:
I am struggling to find documentation of how to set up $SUBJECT.
I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC using a file-based test user, but the number of different protocols and configurations supported and documented in the config files means that I haven't been able to figure out how to achieve what I
want.
(a) Make sure PEAP works with certificates.
(b) configure and enable LDAP. See mods-available/ldap
Once the LDAP module is available, the server will automatically use it.
And, the server will automatically grab passwords from LDAP. And, the server will automatically use those passwords to do EAP-GTC.
It really is that easy. The key thing is to *let the server do the work*. Don't try to "force" a particular kind of authentication. EAP doesn't work that way.
If you're using Active Directory, it's harder. Because Active Directory isn't a real LDAP server.
It also helps to describe what you've done, what happened, and why you think it's wrong. Otherwise, we're limited to:
Q: I tried stuff and it doesn't work. What do I do? A: Try different stuff
Which isn't helpful to anyone. Better questions means better answers.
Alan DeKok.
------------------------------
Message: 3 Date: Mon, 28 Jan 2019 00:27:28 +0100 From: diego.barzon@tiscali.it To: <freeradius-users@lists.freeradius.org> Subject: Multiple UserDN for different LDAPs Message-ID: <a5fefc494d4f1514bf2d35eb706b2edb@tiscali.it> Content-Type: text/plain; charset=UTF-8
Hi all, here's the problem. I need to authenticate against 2 different LDAP servers, populated with different data. I don't need specific information (like group memberships or so): trying to bind with the credentials is enough. In 'authorize' I set Auth to LDAP and in authenticate I put something like this: ldap1{ fail = 1 invalid = 2
reject = 3 } if (!ok) { ldap2 } ldap1 and ldap2 configurations are on separate files, they are different in everything: the former's a DC, the latter an openldap server. Moreover they have different BaseDN. It looks like freeradius set UserDN for the first ldap and tries to use the same on the second. I think I need two different values for LDAP-UserDN, which is not possible, but I read there's some kind of workaround involving writing on files/authorize but honestly I didn't understand what I'm supposed to do. Thanks in advance!
Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY! http://tisca.li/myopen
------------------------------
Message: 4 Date: Mon, 28 Jan 2019 11:14:50 +0700 From: "Soklang Sum" <soklang.sum@cambotech.com> To: <freeradius-users@lists.freeradius.org> Subject: Freeradius-Users Digest, Vol 165, Issue 68 Message-ID: <000201d4b6c0$05465b20$0fd31160$@cambotech.com> Content-Type: text/plain; charset="utf-8"
Dear Team Freeradius,
I would like to ask about FreeRADIUS work with google authenticator (2FA) or not? I have tried to install freeRADIUS with google authenticator but it doesn't work, when I try install following the guideline any website like https://networkjutsu.com/freeradius-google-authenticator/ it always rejected.
So that why I want to make sure from team expertise freeRADIUS it work with google authenticator or not?
But I saw in the guideline it works but for me never work.
Please help feedback soon as possible.
Thanks
===================
-----Original Message----- From: Freeradius-Users <freeradius-users-bounces+soklang.sum= cambotech.com@lists.freeradius.org> On Behalf Of freeradius-users-request@lists.freeradius.org Sent: Sunday, January 27, 2019 6:00 PM To: freeradius-users@lists.freeradius.org Subject: Freeradius-Users Digest, Vol 165, Issue 68
Send Freeradius-Users mailing list submissions to freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request@lists.freeradius.org
You can reach the person managing the list at freeradius-users-owner@lists.freeradius.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Session start times issues (Philemon Jaomalaza) 2. Re: Session start times issues (Alan DeKok)
----------------------------------------------------------------------
Message: 1 Date: Sat, 26 Jan 2019 16:43:23 +0300 From: "Philemon Jaomalaza" <philemon.jaomalaza@gmail.com> To: "'FreeRadius users mailing list'" <freeradius-users@lists.freeradius.org> Subject: Session start times issues Message-ID: <031301d4b57d$1e29c3a0$5a7d4ae0$@gmail.com> Content-Type: text/plain; charset="utf-8"
Hello, If the nas has a wrong date and time, the sqlcounter does not work correctly.
The attribute Event-Timestamp got the wrong data and time from nas.
I found this features in preacct substitution:
update request { &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-D$ }
I uncomente it but nothing change.
Where is the best way to have the good local time of radius server on "acctstarttime" column of "radacct" on sql database ?
JMLZ
--- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus
------------------------------
Message: 2 Date: Sat, 26 Jan 2019 14:35:02 -0500 From: Alan DeKok <aland@deployingradius.com> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: Session start times issues Message-ID: <717983BF-2594-4316-807F-0726F706BD53@deployingradius.com> Content-Type: text/plain; charset=us-ascii
On Jan 26, 2019, at 8:43 AM, Philemon Jaomalaza < philemon.jaomalaza@gmail.com> wrote:
If the nas has a wrong date and time, the sqlcounter does not work correctly.
If I take the tires off of my car, it doesn't drive well.
Solution: fix the REAL problem.
The attribute Event-Timestamp got the wrong data and time from nas.
Fix the NAS. Anything else is an ugly hack.
I found this features in preacct substitution:
update request { &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-D$ }
I uncomente it but nothing change.
Where is the best way to have the good local time of radius server on "acctstarttime" column of "radacct" on sql database ?
Fix the NAS.
Alan DeKok.
------------------------------
Subject: Digest Footer
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
------------------------------
End of Freeradius-Users Digest, Vol 165, Issue 68 *************************************************
------------------------------
Message: 5 Date: Mon, 28 Jan 2019 10:05:15 +0530 From: slnarayanan@nitt.edu To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: radius accounting issue. Message-ID:
<20190128100515.Horde.b8e9HpA3uLd-EHwBhBcx3A6@webmail.nitt.edu> Content-Type: text/plain; charset="utf-8"; Format="flowed"; DelSp="Yes"
Dear All,
I have a problem with accounting .Everything is working fine on freeradius.Login& authentication sql everything is working fine.But i have a problem in accounting pocket.We are using sonciwall firwall in our campus.Those who logged through our radius server the login information (Radius Accounting) information need to display on sonicwall user's page.The UDP pocket 1813 not send to our firewall ip.In the firewall i have enable policy allow to all our local network.I have attached my radiususd -X log to this mail.Kindly provide the solution for resolve my issue.The Radius Accounting information now shows on radacct in the phpmyadmin.
Regards. S.Lakshmi narayanan
-------------- next part -------------- FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = yes auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm int { virtual_server = inner-tunnel } radiusd: #### Loading Clients #### client localhost { ipv4addr = * require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "udp" limit { max_connections = 16 lifetime = 0 idle_timeout = 0 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = NTLMAuth # Creating Auth-Type = MS-CHAP # Creating Autz-Type = Status-Server # Creating Acct-Type = Status-Server # Creating Auth-Type = NTLM_AUTH radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled&q