I'm trying to configure dynamics wlans using Cisco WLC + freeradius, but I have some issues. I modified the ldap.attrmap, including the attributes: replyItem Tunnel-Type radiusTunnelType replyItem Tunnel-Medium-Type radiusTunnelMediumType replyItem Tunnel-Private-Group-Id radiusTunnelPrivateGroupId However, when a try to connect, the freeradius replies a "0" (ex: Tunnel-Private-Group-Id:0) after the attribute, as you can see below: Sending Access-Accept of id 146 to 10.1.0.161 port 32768 Tunnel-Private-Group-Id:0 = "85" Tunnel-Medium-Type:0 = 802 Tunnel-Type:0 = VLAN Filter-Id = "Enterasys:version=1:policy=Aluno" MS-MPPE-Recv-Key = 0xcfcf3c464de734110cda4f22dc1ed36c2e7e5c629861059036e61fb5e98d104b MS-MPPE-Send-Key = 0x8115583c24b0c533eca2417e1a82e092bd908417dee2cecdeb3b89d857f4634f EAP-Message = 0x030c0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "leofell" I think it may the problem and I'd like to know why it happens.. Thanks! -- Leonardo Fell Setor de Redes - NTI Centro Universitário UNIVATES Fundação Vale do Taquari de Educação e Desenvolvimento Social - FUVATES Telefone: (51)37147000 Ramal 5809 www.univates.br