Success! Thanks a lot Matthew - really appreciate your help and the quick response. Now I need to proceed with assigning the IP's from radius! Here is the log just in case you wanted to see it. FreeRADIUS Version 3.0.23 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/totp including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/sqlippool including configuration file /etc/raddb/mods-config/sql/ippool/mysql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/rfc7542 including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/canonicalization including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default main { security { user = "root" group = "root" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "CVE-2016-6309" } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client rad_clients { ipaddr = 0.0.0.0/0 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Found debugger attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "mschapv2" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "database-server" port = 3306 login = "lhadmin" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_totp # Loading module "totp" from file /etc/raddb/mods-enabled/totp # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_sqlippool # Loading module "main_pool" from file /etc/raddb/mods-enabled/sqlippool sqlippool main_pool { sql_module_instance = "sql" lease_duration = 3600 pool_name = "Pool-Name" default_pool = "main_pool" allow_duplicates = no attribute_name = "Framed-IP-Address" allocate_begin = "START TRANSACTION" allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" allocate_clear_timeout = 1 allocate_existing = "" allocate_requested = "" allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < NOW() OR expiry_time IS NULL) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE" allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL" allocate_commit = "COMMIT" pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "" start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" start_commit = "" alive_begin = "" alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" alive_commit = "" stop_begin = "" stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" stop_commit = "" on_begin = "" on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" on_commit = "" off_begin = "" off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" off_commit = "" messages { exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } instantiate { } # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.5.5 mysql { tls { tls_required = no check_cert = no check_cert_cn = no } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on database-server via TCP/IP, server version 5.7.33-log, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on database-server via TCP/IP, server version 5.7.33-log, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on database-server via TCP/IP, server version 5.7.33-log, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on database-server via TCP/IP, server version 5.7.33-log, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on database-server via TCP/IP, server version 5.7.33-log, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on database-server via TCP/IP, server version 5.7.33-log, protocol version 10 # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "main_pool" from file /etc/raddb/mods-enabled/sqlippool Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1" } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:331 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading preacct {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/policy.d/canonicalization:115 # Loading accounting {...} # Loading session {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests (0) Received Access-Request Id 88 from 192.168.16.3:53691 to 192.168.16.2:1812 length 159 (0) User-Name = "chris" (0) NAS-Port-Type = Virtual (0) Service-Type = Framed-User (0) NAS-Port = 2 (0) NAS-Port-Id = "ikev2-vpn" (0) NAS-IP-Address = 192.168.16.3 (0) Called-Station-Id = "192.168.16.3[4500]" (0) Calling-Station-Id = "192.168.16.1[63912]" (0) Acct-Session-Id = "1631739281-2" (0) EAP-Message = 0x0200000a016368726973 (0) NAS-Identifier = "strongSwan" (0) Message-Authenticator = 0xe51864168a426ac69642bd942379651d (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> chris (0) sql: SQL-User-Name set to 'chris' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (0) sql: User found in radcheck table (0) sql: Conditional check items matched, merging assignment check items (0) sql: Cleartext-Password := "chris123" (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (1) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on database-server via TCP/IP, server version 5.7.33-log, protocol version 10 (0) [sql] = ok (0) eap: Peer sent EAP Response (code 2) ID 0 length 10 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_mschapv2 to process data (0) eap_mschapv2: Issuing Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 43 (0) eap: EAP session adding &reply:State = 0xa062692ba0637332 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 88 from 192.168.16.2:1812 to 192.168.16.3:53691 length 0 (0) EAP-Message = 0x0101002b1a01010026100786a83b5c92f867b2f0051ee35f44a3667265657261646975732d332e302e3233 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xa062692ba063733231a5799c7a6450a4 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 89 from 192.168.16.3:53691 to 192.168.16.2:1812 length 231 (1) User-Name = "chris" (1) NAS-Port-Type = Virtual (1) Service-Type = Framed-User (1) NAS-Port = 2 (1) NAS-Port-Id = "ikev2-vpn" (1) NAS-IP-Address = 192.168.16.3 (1) Called-Station-Id = "192.168.16.3[4500]" (1) Calling-Station-Id = "192.168.16.1[63912]" (1) Acct-Session-Id = "1631739281-2" (1) EAP-Message = 0x020100401a0201003b31fe15369f3bee85c15ac51f811312bb8b000000000000000028ea920c9777e19788369862212c21c487e3d8056f9e6b81006368726973 (1) NAS-Identifier = "strongSwan" (1) State = 0xa062692ba063733231a5799c7a6450a4 (1) Message-Authenticator = 0x0db7d129328f67c55a4a5db35ce77a32 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) sql: EXPAND %{User-Name} (1) sql: --> chris (1) sql: SQL-User-Name set to 'chris' rlm_sql (sql): Reserved connection (2) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (1) sql: User found in radcheck table (1) sql: Conditional check items matched, merging assignment check items (1) sql: Cleartext-Password := "chris123" (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (1) sql: User not found in any groups rlm_sql (sql): Released connection (2) (1) [sql] = ok (1) eap: Peer sent EAP Response (code 2) ID 1 length 64 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xa062692ba0637332 (1) eap: Finished EAP session with state 0xa062692ba0637332 (1) eap: Previous EAP request found for state 0xa062692ba0637332, released from the list (1) eap: Peer sent packet with method EAP MSCHAPv2 (26) (1) eap: Calling submodule eap_mschapv2 to process data (1) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/default (1) eap_mschapv2: authenticate { (1) mschap: Found Cleartext-Password, hashing to create NT-Password (1) mschap: Creating challenge hash with username: chris (1) mschap: Client is using MS-CHAPv2 (1) mschap: Adding MS-CHAPv2 MPPE keys (1) eap_mschapv2: [mschap] = ok (1) eap_mschapv2: } # authenticate = ok (1) eap_mschapv2: MSCHAP Success (1) eap: Sending EAP Request (code 1) ID 2 length 51 (1) eap: EAP session adding &reply:State = 0xa062692ba1607332 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 89 from 192.168.16.2:1812 to 192.168.16.3:53691 length 0 (1) EAP-Message = 0x010200331a0301002e533d38383031343432353230344637314339313636443344344445323632363830383630463845454530 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xa062692ba160733231a5799c7a6450a4 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 90 from 192.168.16.3:53691 to 192.168.16.2:1812 length 173 (2) User-Name = "chris" (2) NAS-Port-Type = Virtual (2) Service-Type = Framed-User (2) NAS-Port = 2 (2) NAS-Port-Id = "ikev2-vpn" (2) NAS-IP-Address = 192.168.16.3 (2) Called-Station-Id = "192.168.16.3[4500]" (2) Calling-Station-Id = "192.168.16.1[63912]" (2) Acct-Session-Id = "1631739281-2" (2) EAP-Message = 0x020200061a03 (2) NAS-Identifier = "strongSwan" (2) State = 0xa062692ba160733231a5799c7a6450a4 (2) Message-Authenticator = 0x68446a7f4f92c89f1bbd123de9e4e84d (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) sql: EXPAND %{User-Name} (2) sql: --> chris (2) sql: SQL-User-Name set to 'chris' rlm_sql (sql): Reserved connection (3) (2) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (2) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (2) sql: User found in radcheck table (2) sql: Conditional check items matched, merging assignment check items (2) sql: Cleartext-Password := "chris123" (2) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (2) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (2) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (2) sql: --> SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (2) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (2) sql: User not found in any groups rlm_sql (sql): Released connection (3) (2) [sql] = ok (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xa062692ba1607332 (2) eap: Finished EAP session with state 0xa062692ba1607332 (2) eap: Previous EAP request found for state 0xa062692ba1607332, released from the list (2) eap: Peer sent packet with method EAP MSCHAPv2 (26) (2) eap: Calling submodule eap_mschapv2 to process data (2) eap: Sending EAP Success (code 3) ID 2 length 4 (2) eap: Freeing handler (2) [eap] = ok (2) } # authenticate = ok (2) # Executing section post-auth from file /etc/raddb/sites-enabled/default (2) post-auth { (2) update { (2) No attributes updated for RHS &session-state: (2) } # update = noop (2) main_pool: No Pool-Name defined (2) main_pool: EXPAND No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) (2) main_pool: --> No Pool-Name defined (did 192.168.16.3[4500] cli 192.168.16.1[63912] port 2 user chris) (2) [main_pool] = noop (2) if ( yes == "yes" ) { (2) if ( yes == "yes" ) -> TRUE (2) if ( yes == "yes" ) { (2) sql: EXPAND .query (2) sql: --> .query (2) sql: Using query template 'query' rlm_sql (sql): Reserved connection (4) (2) sql: EXPAND %{User-Name} (2) sql: --> chris (2) sql: SQL-User-Name set to 'chris' (2) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (2) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'chris', '', 'Access-Accept', '2021-09-15 20:54:53') (2) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'chris', '', 'Access-Accept', '2021-09-15 20:54:53') (2) sql: SQL query returned: success (2) sql: 1 record(s) updated rlm_sql (sql): Released connection (4) (2) [sql] = ok (2) } # if ( yes == "yes" ) = ok (2) [exec] = noop (2) policy remove_reply_message_if_eap { (2) if (&reply:EAP-Message && &reply:Reply-Message) { (2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (2) else { (2) [noop] = noop (2) } # else = noop (2) } # policy remove_reply_message_if_eap = noop (2) } # post-auth = ok (2) Login OK: [chris/<via Auth-Type = eap>] (from client rad_clients port 2 cli 192.168.16.1[63912]) (2) Sent Access-Accept Id 90 from 192.168.16.2:1812 to 192.168.16.3:53691 length 0 (2) MS-MPPE-Encryption-Policy = Encryption-Allowed (2) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (2) MS-MPPE-Send-Key = 0xec5e3b7b837c7e477cb5dca9762c9764 (2) MS-MPPE-Recv-Key = 0x17992e954fb17f5f80ad3bbe8e397ce0 (2) EAP-Message = 0x03020004 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) User-Name = "chris" (2) Finished request Waking up in 4.9 seconds. (3) Received Accounting-Request Id 91 from 192.168.16.3:35093 to 192.168.16.2:1813 length 135 (3) Acct-Status-Type = Start (3) Acct-Session-Id = "1631739281-2" (3) NAS-Port-Type = Virtual (3) Service-Type = Framed-User (3) NAS-Port = 2 (3) NAS-Port-Id = "ikev2-vpn" (3) NAS-IP-Address = 192.168.16.3 (3) Called-Station-Id = "192.168.16.3[4500]" (3) Calling-Station-Id = "192.168.16.1[63912]" (3) User-Name = "chris" (3) NAS-Identifier = "strongSwan" (3) # Executing section preacct from file /etc/raddb/sites-enabled/default (3) preacct { (3) policy mask_accounting_data { (3) if ( yes == "no" ) { (3) if ( yes == "no" ) -> FALSE (3) } # policy mask_accounting_data = noop (3) [preprocess] = ok (3) policy acct_unique { (3) update request { (3) &Tmp-String-9 := "ai:" (3) } # update request = noop (3) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (3) EXPAND %{hex:&Class} (3) --> (3) EXPAND ^%{hex:&Tmp-String-9} (3) --> ^61693a (3) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (3) else { (3) update request { (3) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (3) --> e3709683e400e095c5fa458587a94463 (3) &Acct-Unique-Session-Id := e3709683e400e095c5fa458587a94463 (3) } # update request = noop (3) } # else = noop (3) } # policy acct_unique = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "chris", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) [files] = noop (3) } # preacct = ok (3) # Executing section accounting from file /etc/raddb/sites-enabled/default (3) accounting { rlm_sql (sql): Reserved connection (0) (3) main_pool: EXPAND %{User-Name} (3) main_pool: --> chris (3) main_pool: SQL-User-Name set to 'chris' (3) main_pool: EXPAND UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}' (3) main_pool: --> UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '192.168.16.3' AND pool_key = '2' AND username = 'chris' AND callingstationid = '192.168.16.1=5B63912=5D' AND framedipaddress = '' (3) main_pool: Executing query: UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '192.168.16.3' AND pool_key = '2' AND username = 'chris' AND callingstationid = '192.168.16.1=5B63912=5D' AND framedipaddress = '' rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0 rlm_sql (sql): Released connection (0) (3) [main_pool] = ok (3) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (3) sql: --> type.start.query (3) sql: Using query template 'query' rlm_sql (sql): Reserved connection (5) (3) sql: EXPAND %{User-Name} (3) sql: --> chris (3) sql: SQL-User-Name set to 'chris' (3) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}') (3) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('1631739281-2', 'e3709683e400e095c5fa458587a94463', 'chris', '', '192.168.16.3', 'ikev2-vpn', 'Virtual', FROM_UNIXTIME(1631739293), FROM_UNIXTIME(1631739293), NULL, '0', '', '', '', '0', '0', '192.168.16.3=5B4500=5D', '192.168.16.1=5B63912=5D', '', 'Framed-User', '', '') (3) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('1631739281-2', 'e3709683e400e095c5fa458587a94463', 'chris', '', '192.168.16.3', 'ikev2-vpn', 'Virtual', FROM_UNIXTIME(1631739293), FROM_UNIXTIME(1631739293), NULL, '0', '', '', '', '0', '0', '192.168.16.3=5B4500=5D', '192.168.16.1=5B63912=5D', '', 'Framed-User', '', '') (3) sql: SQL query returned: success (3) sql: 1 record(s) updated rlm_sql (sql): Released connection (5) (3) [sql] = ok (3) [exec] = noop (3) attr_filter.accounting_response: EXPAND %{User-Name} (3) attr_filter.accounting_response: --> chris (3) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (3) [attr_filter.accounting_response] = updated (3) } # accounting = updated (3) Sent Accounting-Response Id 91 from 192.168.16.2:1813 to 192.168.16.3:35093 length 0 (3) Finished request (3) Cleaning up request packet ID 91 with timestamp +11 Waking up in 4.9 seconds. (4) Received Access-Request Id 92 from 192.168.16.3:53691 to 192.168.16.2:1812 length 159 (4) User-Name = "chris" (4) NAS-Port-Type = Virtual (4) Service-Type = Framed-User (4) NAS-Port = 4 (4) NAS-Port-Id = "ikev2-vpn" (4) NAS-IP-Address = 192.168.16.3 (4) Called-Station-Id = "192.168.16.3[4500]" (4) Calling-Station-Id = "192.168.16.1[63912]" (4) Acct-Session-Id = "1631739281-4" (4) EAP-Message = 0x0200000a016368726973 (4) NAS-Identifier = "strongSwan" (4) Message-Authenticator = 0xfe511ea2674ededf841589bbec75055c (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) sql: EXPAND %{User-Name} (4) sql: --> chris (4) sql: SQL-User-Name set to 'chris' rlm_sql (sql): Reserved connection (1) (4) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (4) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (4) sql: User found in radcheck table (4) sql: Conditional check items matched, merging assignment check items (4) sql: Cleartext-Password := "chris123" (4) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (4) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (4) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (4) sql: --> SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (4) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (4) sql: User not found in any groups rlm_sql (sql): Released connection (1) (4) [sql] = ok (4) eap: Peer sent EAP Response (code 2) ID 0 length 10 (4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Peer sent packet with method EAP Identity (1) (4) eap: Calling submodule eap_mschapv2 to process data (4) eap_mschapv2: Issuing Challenge (4) eap: Sending EAP Request (code 1) ID 1 length 43 (4) eap: EAP session adding &reply:State = 0xabe504faabe41e91 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 92 from 192.168.16.2:1812 to 192.168.16.3:53691 length 0 (4) EAP-Message = 0x0101002b1a0101002610ab98d028fae47f4a47c11c5906e96af4667265657261646975732d332e302e3233 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xabe504faabe41e91efcf5143178b5b38 (4) Finished request Waking up in 4.7 seconds. (5) Received Access-Request Id 93 from 192.168.16.3:53691 to 192.168.16.2:1812 length 231 (5) User-Name = "chris" (5) NAS-Port-Type = Virtual (5) Service-Type = Framed-User (5) NAS-Port = 4 (5) NAS-Port-Id = "ikev2-vpn" (5) NAS-IP-Address = 192.168.16.3 (5) Called-Station-Id = "192.168.16.3[4500]" (5) Calling-Station-Id = "192.168.16.1[63912]" (5) Acct-Session-Id = "1631739281-4" (5) EAP-Message = 0x020100401a0201003b31fa0f7abc8048417ff713c9ba17c9ae1f000000000000000009134db0d846f9b8fbad56158d3a7e261e19332e1d56424e006368726973 (5) NAS-Identifier = "strongSwan" (5) State = 0xabe504faabe41e91efcf5143178b5b38 (5) Message-Authenticator = 0xbcbbd9e35cdfc8218ad3d6a7b7efeae1 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) sql: EXPAND %{User-Name} (5) sql: --> chris (5) sql: SQL-User-Name set to 'chris' rlm_sql (sql): Reserved connection (6) (5) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (5) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (5) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (5) sql: User found in radcheck table (5) sql: Conditional check items matched, merging assignment check items (5) sql: Cleartext-Password := "chris123" (5) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (5) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (5) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (5) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (5) sql: --> SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (5) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (5) sql: User not found in any groups rlm_sql (sql): Released connection (6) (5) [sql] = ok (5) eap: Peer sent EAP Response (code 2) ID 1 length 64 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xabe504faabe41e91 (5) eap: Finished EAP session with state 0xabe504faabe41e91 (5) eap: Previous EAP request found for state 0xabe504faabe41e91, released from the list (5) eap: Peer sent packet with method EAP MSCHAPv2 (26) (5) eap: Calling submodule eap_mschapv2 to process data (5) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/default (5) eap_mschapv2: authenticate { (5) mschap: Found Cleartext-Password, hashing to create NT-Password (5) mschap: Creating challenge hash with username: chris (5) mschap: Client is using MS-CHAPv2 (5) mschap: Adding MS-CHAPv2 MPPE keys (5) eap_mschapv2: [mschap] = ok (5) eap_mschapv2: } # authenticate = ok (5) eap_mschapv2: MSCHAP Success (5) eap: Sending EAP Request (code 1) ID 2 length 51 (5) eap: EAP session adding &reply:State = 0xabe504faaae71e91 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 93 from 192.168.16.2:1812 to 192.168.16.3:53691 length 0 (5) EAP-Message = 0x010200331a0301002e533d33393938464535463144314233413543323536304333453644314335393441433038363545314232 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xabe504faaae71e91efcf5143178b5b38 (5) Finished request Waking up in 4.6 seconds. (6) Received Access-Request Id 94 from 192.168.16.3:53691 to 192.168.16.2:1812 length 173 (6) User-Name = "chris" (6) NAS-Port-Type = Virtual (6) Service-Type = Framed-User (6) NAS-Port = 4 (6) NAS-Port-Id = "ikev2-vpn" (6) NAS-IP-Address = 192.168.16.3 (6) Called-Station-Id = "192.168.16.3[4500]" (6) Calling-Station-Id = "192.168.16.1[63912]" (6) Acct-Session-Id = "1631739281-4" (6) EAP-Message = 0x020200061a03 (6) NAS-Identifier = "strongSwan" (6) State = 0xabe504faaae71e91efcf5143178b5b38 (6) Message-Authenticator = 0x713a671049987382f8b34eeeff49e6bd (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) sql: EXPAND %{User-Name} (6) sql: --> chris (6) sql: SQL-User-Name set to 'chris' rlm_sql (sql): Reserved connection (2) (6) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (6) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (6) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'chris' ORDER BY id (6) sql: User found in radcheck table (6) sql: Conditional check items matched, merging assignment check items (6) sql: Cleartext-Password := "chris123" (6) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (6) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (6) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'chris' ORDER BY id (6) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (6) sql: --> SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (6) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'chris' ORDER BY priority (6) sql: User not found in any groups rlm_sql (sql): Released connection (2) (6) [sql] = ok (6) eap: Peer sent EAP Response (code 2) ID 2 length 6 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xabe504faaae71e91 (6) eap: Finished EAP session with state 0xabe504faaae71e91 (6) eap: Previous EAP request found for state 0xabe504faaae71e91, released from the list (6) eap: Peer sent packet with method EAP MSCHAPv2 (26) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap: Sending EAP Success (code 3) ID 2 length 4 (6) eap: Freeing handler (6) [eap] = ok (6) } # authenticate = ok (6) # Executing section post-auth from file /etc/raddb/sites-enabled/default (6) post-auth { (6) update { (6) No attributes updated for RHS &session-state: (6) } # update = noop (6) main_pool: No Pool-Name defined (6) main_pool: EXPAND No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) (6) main_pool: --> No Pool-Name defined (did 192.168.16.3[4500] cli 192.168.16.1[63912] port 4 user chris) (6) [main_pool] = noop (6) if ( yes == "yes" ) { (6) if ( yes == "yes" ) -> TRUE (6) if ( yes == "yes" ) { (6) sql: EXPAND .query (6) sql: --> .query (6) sql: Using query template 'query' rlm_sql (sql): Reserved connection (3) (6) sql: EXPAND %{User-Name} (6) sql: --> chris (6) sql: SQL-User-Name set to 'chris' (6) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (6) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'chris', '', 'Access-Accept', '2021-09-15 20:54:53') (6) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'chris', '', 'Access-Accept', '2021-09-15 20:54:53') (6) sql: SQL query returned: success (6) sql: 1 record(s) updated rlm_sql (sql): Released connection (3) (6) [sql] = ok (6) } # if ( yes == "yes" ) = ok (6) [exec] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # post-auth = ok (6) Login OK: [chris/<via Auth-Type = eap>] (from client rad_clients port 4 cli 192.168.16.1[63912]) (6) Sent Access-Accept Id 94 from 192.168.16.2:1812 to 192.168.16.3:53691 length 0 (6) MS-MPPE-Encryption-Policy = Encryption-Allowed (6) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (6) MS-MPPE-Send-Key = 0x73a3e83c71ab4121eecc027e2a0dc549 (6) MS-MPPE-Recv-Key = 0x3f1993884c4e0a20c7d355ce08f60924 (6) EAP-Message = 0x03020004 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) User-Name = "chris" (6) Finished request Waking up in 4.6 seconds. (7) Received Accounting-Request Id 95 from 192.168.16.3:35093 to 192.168.16.2:1813 length 135 (7) Acct-Status-Type = Start (7) Acct-Session-Id = "1631739281-4" (7) NAS-Port-Type = Virtual (7) Service-Type = Framed-User (7) NAS-Port = 4 (7) NAS-Port-Id = "ikev2-vpn" (7) NAS-IP-Address = 192.168.16.3 (7) Called-Station-Id = "192.168.16.3[4500]" (7) Calling-Station-Id = "192.168.16.1[63912]" (7) User-Name = "chris" (7) NAS-Identifier = "strongSwan" (7) # Executing section preacct from file /etc/raddb/sites-enabled/default (7) preacct { (7) policy mask_accounting_data { (7) if ( yes == "no" ) { (7) if ( yes == "no" ) -> FALSE (7) } # policy mask_accounting_data = noop (7) [preprocess] = ok (7) policy acct_unique { (7) update request { (7) &Tmp-String-9 := "ai:" (7) } # update request = noop (7) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (7) EXPAND %{hex:&Class} (7) --> (7) EXPAND ^%{hex:&Tmp-String-9} (7) --> ^61693a (7) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (7) else { (7) update request { (7) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (7) --> 5934b524234a8af869add8fbcdd5609b (7) &Acct-Unique-Session-Id := 5934b524234a8af869add8fbcdd5609b (7) } # update request = noop (7) } # else = noop (7) } # policy acct_unique = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "chris", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) [files] = noop (7) } # preacct = ok (7) # Executing section accounting from file /etc/raddb/sites-enabled/default (7) accounting { rlm_sql (sql): Reserved connection (4) (7) main_pool: EXPAND %{User-Name} (7) main_pool: --> chris (7) main_pool: SQL-User-Name set to 'chris' (7) main_pool: EXPAND UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}' (7) main_pool: --> UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '192.168.16.3' AND pool_key = '4' AND username = 'chris' AND callingstationid = '192.168.16.1=5B63912=5D' AND framedipaddress = '' (7) main_pool: Executing query: UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '192.168.16.3' AND pool_key = '4' AND username = 'chris' AND callingstationid = '192.168.16.1=5B63912=5D' AND framedipaddress = '' rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0 rlm_sql (sql): Released connection (4) (7) [main_pool] = ok (7) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (7) sql: --> type.start.query (7) sql: Using query template 'query' rlm_sql (sql): Reserved connection (0) (7) sql: EXPAND %{User-Name} (7) sql: --> chris (7) sql: SQL-User-Name set to 'chris' (7) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}') (7) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('1631739281-4', '5934b524234a8af869add8fbcdd5609b', 'chris', '', '192.168.16.3', 'ikev2-vpn', 'Virtual', FROM_UNIXTIME(1631739293), FROM_UNIXTIME(1631739293), NULL, '0', '', '', '', '0', '0', '192.168.16.3=5B4500=5D', '192.168.16.1=5B63912=5D', '', 'Framed-User', '', '') (7) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('1631739281-4', '5934b524234a8af869add8fbcdd5609b', 'chris', '', '192.168.16.3', 'ikev2-vpn', 'Virtual', FROM_UNIXTIME(1631739293), FROM_UNIXTIME(1631739293), NULL, '0', '', '', '', '0', '0', '192.168.16.3=5B4500=5D', '192.168.16.1=5B63912=5D', '', 'Framed-User', '', '') (7) sql: SQL query returned: success (7) sql: 1 record(s) updated rlm_sql (sql): Released connection (0) (7) [sql] = ok (7) [exec] = noop (7) attr_filter.accounting_response: EXPAND %{User-Name} (7) attr_filter.accounting_response: --> chris (7) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (7) [attr_filter.accounting_response] = updated (7) } # accounting = updated (7) Sent Accounting-Response Id 95 from 192.168.16.2:1813 to 192.168.16.3:35093 length 0 (7) Finished request (7) Cleaning up request packet ID 95 with timestamp +11 Waking up in 4.6 seconds. (0) Cleaning up request packet ID 88 with timestamp +11 (1) Cleaning up request packet ID 89 with timestamp +11 (2) Cleaning up request packet ID 90 with timestamp +11 Waking up in 0.2 seconds. (4) Cleaning up request packet ID 92 with timestamp +11 (5) Cleaning up request packet ID 93 with timestamp +11 (6) Cleaning up request packet ID 94 with timestamp +11 Ready to process requests __ Regards Chris Myburgh On Wed, Sep 15, 2021 at 10:41 PM Matthew Newton <mcn@freeradius.org> wrote:
On 15/09/2021 21:28, Chris Myburgh wrote:
Listening on acct address :: port 1813 bound to server default Ready to process requests (0) Received Access-Request Id 147 from 172.31.0.3:49093 to 172.31.0.2:1812 length 155 ... (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge
If the incoming request is always (or predominantly) mschapv2, you'll save a round trip by updating the default eap type.
(2) Received Access-Request Id 149 from 172.31.0.3:49093 to 172.31.0.2:1812 length 227 (2) User-Name = "chris" ... (2) Message-Authenticator = 0x8382b4b312204426bfcb9822696d9ff1 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 64 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) } # authorize = updated (2) Found Auth-Type = eap ... (2) eap: Peer sent packet with method EAP MSCHAPv2 (26) (2) eap: Calling submodule eap_mschapv2 to process data (2) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/default (2) eap_mschapv2: authenticate { (2) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (2) mschap: Creating challenge hash with username: chris (2) mschap: Client is using MS-CHAPv2 (2) mschap: ERROR: FAILED: No NT-Password. Cannot perform authentication (2) mschap: ERROR: MS-CHAP2-Response is incorrect (2) eap_mschapv2: [mschap] = reject (2) eap_mschapv2: } # authenticate = reject
Here. You're calling eap, but haven't called sql beforehand, so the attribute hasn't been added. (It's afterwards in the default config as you normally want to short circuit on eap, but this is direct eap-mschapv2, so there's no inner tunnel.)
Add a call to `sql` before the call to `eap` and you should get further.
-- Matthew - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html