Hi, Radius has been bugging me now for over a week and I just can't get it working with Kerberos over WLan. I have been trying around a lot but in the end I purged the freeradius packages and restarted from scratch with default config (on Debian squeeze). All I did was adding a client in clients.conf client 192.168.0.0/16 { secret = averysecretsecret } adding two entries in users.conf testing Cleartext-Password := "pass" DEFAULT Auth-Type = Kerberos and adding Kerberos to authenticate in default and inner-tunnel right after PAP: Auth-Type Kerberos { krb5 } and I configured the Kerberos module. Now when testing with radtest both (kerberos and testing from files) work fine root@donauauen42 ~ # radtest testing pass radius 1 averysecretsecret Sending Access-Request of id 166 to 192.168.43.118 port 1812 User-Name = "testing" User-Password = "pass" NAS-IP-Address = 192.168.42.42 NAS-Port = 1 rad_recv: Access-Accept packet from host 192.168.43.118 port 1812, id=166, length=20 root@donauauen42 ~ # radtest pink.funk-greene XXXXX radius 1 averysecretsecret Sending Access-Request of id 60 to 192.168.43.118 port 1812 User-Name = "pink.funk-greene" User-Password = "XXXXX" NAS-IP-Address = 192.168.42.42 NAS-Port = 1 rad_recv: Access-Accept packet from host 192.168.43.118 port 1812, id=60, length=20 But when testing via WiFi just my testing user works, while my Kerberos users won't work. Not working Kerberos debug log: http://pastie.org/3890159 Vs. working plain users file log: http://pastie.org/3890167 Any help is appreceated. Thanks a lot... -- Jörg Herzinger - EDV Team GLOBAL 2000 - Friends of the Earth Austria Neustiftgasse 36, A-1070 Wien tel +43-699-14200030 Dieses Mail wurde mit Oekostrom und Opensource Software erstellt.