Dear FR users, I've configured FR2 (2.1.8) to authenticate users from the users file, and I ran into a strange problem. In the first case, I've configured it to direct a user to VLAN 129: user1 Cleartext-Password := "Default1234" Tunnel-type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-ID = "129", Termination-Action = "RADIUS-Request" User authentication works fine, but the user isn't directed to the correct VLAN, the switch port remains at its default VLAN. Debug log: http://pastebin.ca/1880327 In the second case, I've turned off 802.1X on the client, then I've set it's MAC address in the users file (of cource, mab is enabled on my Cisco switch): 000bcd0axxxx Cleartext-Password := "000bcd0axxxx" Tunnel-type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-ID = "129", Termination-Action = "RADIUS-Request" Authentication works, the PC is directed to its VLAN. What did I do wrong? Can you help me solve this issue? Thanks in advance. Regards, Andras