Hello, I have big problem with CHAP in Freeradius. I tried versions 1.0.2 and 1.0.5 and I heve the same error. While I'm loging using Rasppoe I have errors in freeradius debug: rad_recv: Access-Request packet from host 127.0.0.1:2294, id=219, length=88 Service-Type = Framed-User Framed-Protocol = PPP User-Name = "test" CHAP-Password = 0x4cffb4ccb24a90a9c115c4827aa8748301 Calling-Station-Id = "00:13:D4:EB:68:01" NAS-IP-Address = 194.88.154.12 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry test at line 1 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type CHAP auth: type "CHAP" Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 0 rlm_chap: login attempt by "test" with CHAP password rlm_chap: Using clear text password rtest for user test authentication. rlm_chap: Pasword check failed modcall[authenticate]: module "chap" returns reject for request 0 modcall: group Auth-Type returns reject for request 0 auth: Failed to validate the user. my user file look just like this: test Auth-Type = Local, Password == "rtest" Framed-Protocol = PPP, Framed-IP-Address = 10.0.0.22 in radiusclient i write localhost and secret i use rp-pppoe-server 3.7 but in 3.5 I have got the same errors where is the error? what I have to change? -- Z powazaniem Przemyslaw Backiel