Hi i have some problems with authentication in Freeradius with Cisco Catalyst 3560 and 802.1x configuration. Freeradius -X -A tell me: Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy *:1814 Ready to process requests. rad_recv: Access-Request packet from host 172.29.11.1:21645, id=26, length=123 Ignoring request from unknown client 172.29.11.1:21645 --- Walking the entire request list --- Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.29.11.1:21645, id=26, length=123 Ignoring request from unknown client 172.29.11.1:21645 --- Walking the entire request list --- Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.29.11.1:21645, id=26, length=123 Ignoring request from unknown client 172.29.11.1:21645 --- Walking the entire request list --- Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.29.11.1:21645, id=26, length=123 Ignoring request from unknown client 172.29.11.1:21645 --- Walking the entire request list --- Nothing to do. Sleeping until we see a request. My clients.conf file has this: 172.29.11.1 { secret = mecago shortname = cisco3560 nastype = other } I also test with nastype = cisco , and it doesn´t run too. In mi cisco config I have this : aaa new-model aaa authentication login default local aaa authentication dot1x default group radius aaa authorization exec default local aaa authorization network default local aaa session-id common radius-server host 172.29.11.7 auth-port 1812 acct-port 1813 timeout 3 radius-server key mecago interface FastEthernet0/5 switchport access vlan 2 switchport mode access dot1x port-control auto dot1x pae authenticator spanning-tree portfast Any one have any idea about this error? Thanks. -- Xgalaga se disfruta más sobre NetBSD sparc64 Content Rules: ///// \\\/// ///\\\ The Duke of Url. { O--O } / /\ \ \ -- / [||]