Hello list, i have a problem with freeradius and an Access Point configured as NAS. I'm using freeradius version 1.1.6. I suppose that the problem is about this message: Acct-Status-Type = Stop Acct-Terminate-Cause = NAS-Error Here the complite log: Thu Jul 5 10:57:26 2007 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 401 NAS-Port-Type = Ethernet User-Name = "massi" Calling-Station-Id = "00:15:D6:24:32:52" Called-Station-Id = "internet-test-2.4GH" NAS-Port-Id = "wlan1" Acct-Session-Id = "81f0005c" Framed-IP-Address = 10.1.1.7 Framed-IP-Netmask = 255.255.255.0 Acct-Authentic = RADIUS Acct-Status-Type = Start NAS-Identifier = "FlyBoost" NAS-IP-Address = 192.168.10.36 Acct-Delay-Time = 0 Client-IP-Address = 192.168.10.36 Acct-Unique-Session-Id = "e4880271975e52f1" Timestamp = 1183625846 Thu Jul 5 10:57:26 2007 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 401 NAS-Port-Type = Ethernet User-Name = "massi" Calling-Station-Id = "00:15:D6:24:32:52" Called-Station-Id = "internet-test-2.4GH" NAS-Port-Id = "wlan1" Acct-Session-Id = "81f0005c" Framed-IP-Address = 10.1.1.7 Framed-IP-Netmask = 255.255.255.0 Acct-Authentic = RADIUS Acct-Session-Time = 0 Acct-Input-Octets = 56 Acct-Input-Gigawords = 0 Acct-Input-Packets = 5 Acct-Output-Octets = 50 Acct-Output-Gigawords = 0 Acct-Output-Packets = 5 Acct-Status-Type = Stop Acct-Terminate-Cause = NAS-Error NAS-Identifier = "FlyBoost" NAS-IP-Address = 192.168.10.36 Acct-Delay-Time = 0 Client-IP-Address = 192.168.10.36 Acct-Unique-Session-Id = "e4880271975e52f1" Timestamp = 1183625846 Any idea ? Thank's Flavio