OK, I've tried using a proxy and now it fails on rlm_eap and says the User-Name doesn't match EAP Identity. Is there a way to have EAP processed on the local machine but authentication happen on the remote? Is that even the problem? Kerry Tobin Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /private/etc/raddb/proxy.conf Config: including file: /private/etc/raddb/clients.conf Config: including file: /private/etc/raddb/snmp.conf Config: including file: /private/etc/raddb/eap.conf Config: including file: /private/etc/raddb/sql.conf main: prefix = "/" main: localstatedir = "/private/var" main: logdir = "/private/var/log/radius" main: libdir = "//lib" main: radacctdir = "/private/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/private/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/private/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "//sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = no Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded opendirectory opendirectory: passwd = "(null)" Module: Instantiated opendirectory (opendirectory) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/private/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "ttls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/certificates/Default.key" tls: certificate_file = "/etc/certificates/Default.crt" tls: CA_file = "/etc/certificates/Default.crt" tls: private_key_password = "" tls: dh_file = "/private/etc/raddb/certs/dh" tls: random_file = "/private/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "mschapv2" ttls: copy_request_to_tunnel = no ttls: use_tunneled_reply = no rlm_eap: Loaded and initialized type ttls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/private/etc/raddb/huntgroups" preprocess: hints = "/private/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/private/etc/raddb/users" files: acctusersfile = "/private/etc/raddb/acct_users" files: preproxy_usersfile = "/private/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/private/var/log/radius/radacct/%{Client-IP- Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/private/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Module: Loaded SQL sql: driver = "rlm_sql_sqlite" sql: server = "localhost" sql: port = "" sql: login = "root" sql: password = "rootpass" sql: radius_db = "radius" sql: nas_table = "nas" sql: sqltrace = no sql: sqltracefile = "/private/var/log/radius/sqltrace.sql" sql: readclients = yes sql: deletestalesessions = yes sql: num_sql_socks = 5 sql: sql_user_name = "%{User-Name}" sql: default_user_profile = "" sql: query_on_not_found = no sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User- Name}' ORDER BY id" sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User- Name}' ORDER BY id" sql: authorize_group_check_query = "SELECT radgroupcheck .id ,radgroupcheck .GroupName ,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" sql: authorize_group_reply_query = "SELECT radgroupreply .id ,radgroupreply .GroupName ,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct- Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" sql: accounting_update_query = " UPDATE radacct SET FramedIPAddress = '%{Framed-IP- Address}', AcctSessionTime = '%{Acct-Session- Time}', AcctInputOctets = '%{Acct-Input- Gigawords:-0}' << 32 | '%{Acct- Input-Octets:-0}', AcctOutputOctets = '%{Acct-Output- Gigawords:-0}' << 32 | '%{Acct- Output-Octets:-0}' WHERE AcctSessionId = '%{Acct-Session- Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_update_query_alt = " INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) VALUES ('%{Acct-Session- Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User- Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS- Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '% {Acct-Authentic}', '', '%{Acct-Input-Gigawords:-0}' << 32 | '%{Acct-Input-Octets:-0}', '%{Acct-Output- Gigawords:-0}' << 32 | '%{Acct-Output- Octets:-0}', '%{Called-Station-Id}', '%{Calling-Station- Id}', '%{Service-Type}', '%{Framed- Protocol}', '%{Framed-IP-Address}', '0', '% {X-Ascend-Session-Svr-Key}')" sql: accounting_start_query = " INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) VALUES ('%{Acct-Session- Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User- Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS- Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP- Address}', '%{Acct-Delay-Time:-0}', '0', '%{X-Ascend- Session-Svr-Key}')" sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '% {Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query = " UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Gigawords:-0}' << 32 | '%{Acct-Input- Octets:-0}', AcctOutputOctets = '%{Acct-Output- Gigawords:-0}' << 32 | '%{Acct- Output-Octets:-0}', AcctTerminateCause = '%{Acct- Terminate-Cause}', AcctStopDelay = '%{Acct-Delay- Time:-0}', ConnectInfo_stop = '%{Connect- Info}' WHERE AcctSessionId = '%{Acct-Session- Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query_alt = " INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) VALUES ('%{Acct- Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User- Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS- Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '% {Connect-Info}', '%{Acct-Input-Gigawords:-0}' << 32 | '%{Acct-Input-Octets:-0}', '%{Acct-Output- Gigawords:-0}' << 32 | '%{Acct-Output- Octets:-0}', '%{Called-Station-Id}', '%{Calling-Station- Id}', '%{Acct-Terminate-Cause}', '%{Service- Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time:-0}')" sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'" sql: connect_failure_retry_delay = 60 sql: simul_count_query = "" sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User- Name}' AND AcctStopTime = 0" sql: postauth_query = "INSERT into radpostauth (user, pass, reply, date) values ('%{User-Name}', '%{User-Password:-Chap-Password}', '% {reply:Packet-Type}', NOW())" sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" rlm_sql (sql): Driver rlm_sql_sqlite (module rlm_sql_sqlite) loaded and linked rlm_sql (sql): Attempting to connect to root@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_sqlite #0 rlm_sql_sqlite: Opening sqlite database for #0 rlm_sql_sqlite: sqlite3_open() = 0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_sqlite #1 rlm_sql_sqlite: Opening sqlite database for #1 rlm_sql_sqlite: sqlite3_open() = 0 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_sqlite #2 rlm_sql_sqlite: Opening sqlite database for #2 rlm_sql_sqlite: sqlite3_open() = 0 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_sqlite #3 rlm_sql_sqlite: Opening sqlite database for #3 rlm_sql_sqlite: sqlite3_open() = 0 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_sqlite #4 rlm_sql_sqlite: Opening sqlite database for #4 rlm_sql_sqlite: sqlite3_open() = 0 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): - generate_sql_clients rlm_sql (sql): Query: SELECT * FROM nas rlm_sql (sql): Reserving sql socket id: 4 rlm_sql_sqlite: sqlite3_prepare() = 0 rlm_sql_sqlite: sqlite3_step = 100 rlm_sql (sql): Read entry nasname=10.0.1.81,shortname=RadiusServ,secret=testing123 rlm_sql (sql): Adding client 10.0.1.81 (RadiusServ) to clients list rlm_sql_sqlite: sqlite3_step = 101 rlm_sql_sqlite: sqlite3_finalize() = 0 rlm_sql (sql): Released sql socket id: 4 Module: Instantiated sql (sql) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.0.1.81:1814, id=1, length=136 User-Name = "testuser" Framed-MTU = 1400 Called-Station-Id = "0012.014d.d511" Calling-Station-Id = "001f.5bbe.f006" Service-Type = Login-User Message-Authenticator = 0xcb3a97dde57e8f67081dc5e3d1b9c75f EAP-Message = 0x020200140142494f4348454d5c6b77746f62696e NAS-Port-Type = Wireless-802.11 NAS-Port = 26082 NAS-IP-Address = 10.0.1.18 Proxy-State = 0x323430 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 2 length 20 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 153 modcall[authorize]: module "files" returns ok for request 0 rlm_opendirectory: The SACL group "com.apple.access_radius" does not exist on this system. rlm_opendirectory: The host 10.0.1.81 does not have an access group. rlm_opendirectory: no access control groups, all users allowed. modcall[authorize]: module "opendirectory" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: Identity does not match User-Name, setting from EAP Identity. rlm_eap: Failed in handler modcall[authenticate]: module "eap" returns invalid for request 0 modcall: leaving group authenticate (returns invalid) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 1 to 10.0.1.81 port 1814 Proxy-State = 0x323430 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 1 with timestamp 49106a06 Nothing to do. Sleeping until we see a request. On Nov 3, 2008, at 1:01 PM, freeradius-users-request@lists.freeradius.org wrote:
Message: 3 Date: Mon, 03 Nov 2008 15:45:44 +0100 From: <tnt@kalik.net> Subject: Re: Unable to authenticate to Open Directory To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Message-ID: <YjVYPK5R.1225723544.6673350.tnt@kalik.net> Content-Type: text/plain; charset=ISO-8859-2
Still fails when with_ntdomain_hack is enabled...
..
rlm_realm: Looking up realm "DOMAIN" for User-Name = "DOMAIN \testuser" rlm_realm: Found realm "DOMAIN" rlm_realm: Adding Stripped-User-Name = "testuser" rlm_realm: Proxying request from user testuser to realm DOMAIN rlm_realm: Adding Realm = "DOMAIN" rlm_realm: Authentication realm is LOCAL.
You need to proxy for real. Not locally as those are not stripped. There should be a proxy server sending requests to this one and stripping out the DOMAIN bit.
Ivan Kalik Kalik Informatika ISP