Hi, How can I controll if the radius should take the nt-Password or the cleartext-Password? I mapped an cleartext-Entry in ldap to the User-Password radius entry in ldap.attrmap. The request is looking in the directory for the checkItem: User-Password --> found! But for authentication it wants to do MS-CHAPv2 with the NT-Password!!??!! modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 7 rlm_mschap: Told to do MS-CHAPv2 for unrz148 with NT-Password rlm_mschap: adding MS-CHAPv2 MPPE keys modcall[authenticate]: module "mschap" returns ok for request 7 modcall: group Auth-Type returns ok for request 7 MSCHAP Success modcall[authenticate]: module "eap" returns handled for request 7 modcall: group authenticate returns handled for request 7 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 7 modcall: group authenticate returns handled for request 7 Sending Access-Challenge of id 64 to 131.188.4.191:20001 but later: rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 8 rlm_eap: EAP packet type response id 7 length 89 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 8 modcall[authorize]: module "files" returns notfound for request 8 modcall: group authorize returns updated for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 ---------------------------------------- ---> What means this????? rlm_eap: Request not found in the list rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request rlm_eap: Failed in handler modcall[authenticate]: module "eap" returns invalid for request 8 modcall: group authenticate returns invalid for request 8 auth: Failed to validate the user. --------------------------------------- Login incorrect: [unrz148/<no User-Password attribute>] (from client airbrush port 0 cli 00-90-4B-8F-B7-3B) Delaying request 8 for 1 seconds Finished request 8 I am sorry I do not get it, here is my complete log-Output: see attachment Thanks Florian -- -------------------------------------------------------------- Dipl. Inf. Florian Prester Network Administration Regionales RechenZentrum Erlangen Universitaet Erlangen-Nuernberg Germany Tel.: +499131 8527813 Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/var" main: logdir = "/var/log" main: libdir = "/usr/local/lib" main: radacctdir = "/var/log/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = yes main: log_file = "/var/log/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = no proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 600 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem" tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded LDAP ldap: server = "131.188.3.53" ldap: port = 400 ldap: net_timeout = 1 ldap: timeout = 24 ldap: timelimit = 23 ldap: identity = "cn=florian,ou=allro,ou=AAAdsadm,o=Universitaet Erlangen-Nuernberg,c=DE" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "XXX" ldap: basedn = "ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE" ldap: filter = "(Userid=%{Stripped-User-Name:-%{User-Name}})" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "(null)" ldap: password_attribute = "User-Password" ldap: access_attr = "uid" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP fauUserid mapped to RADIUS User-Password conns: 0x817a680 Module: Instantiated ldap (ldap) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/var/log/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/var/log/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 131.188.4.191:20001, id=58, length=143 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User EAP-Message = 0x0201000c01756e727a313438 User-Name = "unrz148" NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0xc06d9475f4e1734074fa5f7a47c242c8 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 131.188.3.53:400, authentication 0 rlm_ldap: bind as cn=florian,ou=allro,ou=AAAdsadm,o=Universitaet Erlangen-Nuernberg,c=DE/xxxx to 131.188.3.53:400 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 rlm_eap: EAP packet type response id 1 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 modcall[authorize]: module "files" returns notfound for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 58 to 131.188.4.191:20001 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x270ffa52f6cd54af512613f5dc5a0163 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 131.188.4.191:20001, id=58, length=143 Sending duplicate reply to client airbrush:20001 - ID: 58 Re-sending Access-Challenge of id 58 to 131.188.4.191:20001 --- Walking the entire request list --- Cleaning up request 0 ID 58 with timestamp 42ae9a7b Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 131.188.4.191:20001, id=59, length=261 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User User-Name = "unrz148" State = 0x270ffa52f6cd54af512613f5dc5a0163 EAP-Message = 0x0202007019800000006616030100610100005d030142ae9a8c9ab37cb5e0be2d40b17ee3a0c9dc7eb42c91aac9a17fe703487bd50920ad7715fb0a7a0ca9afd61ffd9578c2a03915324eb5435068e6922188812d47d5001600040005000a000900640062000300060013001200630100 NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0x9bf7576f94ad6fbb49ea90935b20a0cd Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 1 rlm_eap: EAP packet type response id 2 length 112 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 modcall[authorize]: module "files" returns notfound for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0061], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 1 modcall: group authenticate returns handled for request 1 Sending Access-Challenge of id 59 to 131.188.4.191:20001 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2adab79082d449df9b7da77f4bcd00f9 Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 131.188.4.191:20001, id=59, length=261 Sending duplicate reply to client airbrush:20001 - ID: 59 Re-sending Access-Challenge of id 59 to 131.188.4.191:20001 --- Walking the entire request list --- Cleaning up request 1 ID 59 with timestamp 42ae9a81 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 131.188.4.191:20001, id=60, length=155 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User User-Name = "unrz148" State = 0x2adab79082d449df9b7da77f4bcd00f9 EAP-Message = 0x020300061900 NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0x83e5596497bddbf7ee210c4e7d4d509b Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 2 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 modcall[authorize]: module "files" returns notfound for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 60 to 131.188.4.191:20001 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xdba2ec94e26cdc9029662c91d5de7c75 Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 131.188.4.191:20001, id=60, length=155 Sending duplicate reply to client airbrush:20001 - ID: 60 Re-sending Access-Challenge of id 60 to 131.188.4.191:20001 --- Walking the entire request list --- Cleaning up request 2 ID 60 with timestamp 42ae9a87 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 131.188.4.191:20001, id=61, length=341 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User User-Name = "unrz148" State = 0xdba2ec94e26cdc9029662c91d5de7c75 EAP-Message = 0x020400c01980000000b61603010086100000820080cfbb1dd41d0df0c6e0e1cb6462b7e81823085da901070fa40f7eb12b9e895c67d008c3da58b0129404054041302516c5a0ba714764f85dc3032ade87073c0574c4707bf75310dfbf09bbb82af75459f5c3dd0a17fe78bc4d0ec4310bf63633d55c192cf5c0709bd79db371c2690572c20bb88fcbf605e60b3d07e46186cf2f6a14030100010116030100208a09577f64446134031d8e1369db91db3ee537e2e43bf06b9e28843c6cab325f NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0xa10d965b399e7ed9781f6af3b5b69486 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 3 rlm_eap: EAP packet type response id 4 length 192 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 modcall[authorize]: module "files" returns notfound for request 3 modcall: group authorize returns updated for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: group authenticate returns handled for request 3 Sending Access-Challenge of id 61 to 131.188.4.191:20001 EAP-Message = 0x0105003119001403010001011603010020737ff100536fae4f010e5a5dc6d837e397c7f85ffc5dfdd4672a97191ce55a62 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9d81b76d29d5bb96464d985ea5a72a71 Finished request 3 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 131.188.4.191:20001, id=61, length=341 Sending duplicate reply to client airbrush:20001 - ID: 61 Re-sending Access-Challenge of id 61 to 131.188.4.191:20001 --- Walking the entire request list --- Cleaning up request 3 ID 61 with timestamp 42ae9a8d Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 131.188.4.191:20001, id=62, length=155 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User User-Name = "unrz148" State = 0x9d81b76d29d5bb96464d985ea5a72a71 EAP-Message = 0x020500061900 NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0xa79c981dce7c71f29bc87fdf2d8d3e80 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 4 rlm_eap: EAP packet type response id 5 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 modcall[authorize]: module "files" returns notfound for request 4 modcall: group authorize returns updated for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 4 modcall: group authenticate returns handled for request 4 Sending Access-Challenge of id 62 to 131.188.4.191:20001 EAP-Message = 0x010600201900170301001566e4b4b405bc2c12b176e3557a29c3c03815f4ddd2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5550b1e72047a6159121b463f0f2760a Finished request 4 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 131.188.4.191:20001, id=62, length=155 Sending duplicate reply to client airbrush:20001 - ID: 62 Re-sending Access-Challenge of id 62 to 131.188.4.191:20001 --- Walking the entire request list --- Cleaning up request 4 ID 62 with timestamp 42ae9a93 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 131.188.4.191:20001, id=63, length=184 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User User-Name = "unrz148" State = 0x5550b1e72047a6159121b463f0f2760a EAP-Message = 0x020600231900170301001888367f88b8b7708556ab4886d9c94dde43f6bafe2532d994 NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0x8ea347ff548c28722c8172e46158a763 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 5 rlm_eap: EAP packet type response id 6 length 35 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 modcall[authorize]: module "files" returns notfound for request 5 modcall: group authorize returns updated for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - unrz148 rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled identity of unrz148 PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to unrz148 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 5 rlm_eap: EAP packet type response id 6 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 modcall[authorize]: module "files" returns notfound for request 5 modcall: group authorize returns updated for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 Sending Access-Challenge of id 63 to 131.188.4.191:20001 EAP-Message = 0x010700381900170301002d7c2c8e60506d6f294dcb35bd3b21b7b49bf411c538c25f6371e7879f4e0b98753a967c6119158063715e62041b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x608c84a6c7bdebe161a378bf2712bbdb Finished request 5 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 131.188.4.191:20001, id=63, length=184 Sending duplicate reply to client airbrush:20001 - ID: 63 Re-sending Access-Challenge of id 63 to 131.188.4.191:20001 --- Walking the entire request list --- Cleaning up request 5 ID 63 with timestamp 42ae9a99 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 131.188.4.191:20001, id=63, length=184 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User User-Name = "unrz148" State = 0x5550b1e72047a6159121b463f0f2760a EAP-Message = 0x020600231900170301001888367f88b8b7708556ab4886d9c94dde43f6bafe2532d994 NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0x8ea347ff548c28722c8172e46158a763 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 6 rlm_eap: EAP packet type response id 6 length 35 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 modcall[authorize]: module "files" returns notfound for request 6 modcall: group authorize returns updated for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request not found in the list rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request rlm_eap: Failed in handler modcall[authenticate]: module "eap" returns invalid for request 6 modcall: group authenticate returns invalid for request 6 auth: Failed to validate the user. Login incorrect: [unrz148/<no User-Password attribute>] (from client airbrush port 0 cli 00-90-4B-8F-B7-3B) Delaying request 6 for 1 seconds Finished request 6 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 131.188.4.191:20001, id=64, length=238 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User User-Name = "unrz148" State = 0x608c84a6c7bdebe161a378bf2712bbdb EAP-Message = 0x020700591900170301004e7e90b7c54598cc8f991d8641e6b01aaaeb889df18ef70a87a66f19687d685b759e0e27c406a9ff52a71ee0421866391250b4dcf6c017ca748ed4dced7211db8e09b2e395a308a4cc166730ad3de6 NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0xc220272d9a037f0d9b77726394ccc47c Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 7 rlm_eap: EAP packet type response id 7 length 89 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 7 modcall[authorize]: module "files" returns notfound for request 7 modcall: group authorize returns updated for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to unrz148 PEAP: Adding old state with 4b e4 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 7 rlm_eap: EAP packet type response id 7 length 66 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 7 modcall[authorize]: module "files" returns notfound for request 7 modcall: group authorize returns updated for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 7 rlm_mschap: Told to do MS-CHAPv2 for unrz148 with NT-Password rlm_mschap: adding MS-CHAPv2 MPPE keys modcall[authenticate]: module "mschap" returns ok for request 7 modcall: group Auth-Type returns ok for request 7 MSCHAP Success modcall[authenticate]: module "eap" returns handled for request 7 modcall: group authenticate returns handled for request 7 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 7 modcall: group authenticate returns handled for request 7 Sending Access-Challenge of id 64 to 131.188.4.191:20001 EAP-Message = 0x0108004a1900170301003f218f117d77a76da70c19bb284b51eb603360dc21f3a00f2c7dbc1d0c22da1235981479012b052b73ad68eaf1537881a61a34d52d046862f4b6de4cd5016510 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7f60a4cbd632e692be15a7144b117590 Finished request 7 Going to the next request --- Walking the entire request list --- Sending Access-Reject of id 63 to 131.188.4.191:20001 Cleaning up request 6 ID 63 with timestamp 42ae9aa5 Waking up in 6 seconds... rad_recv: Access-Request packet from host 131.188.4.191:20001, id=64, length=238 Sending duplicate reply to client airbrush:20001 - ID: 64 Re-sending Access-Challenge of id 64 to 131.188.4.191:20001 --- Walking the entire request list --- Cleaning up request 7 ID 64 with timestamp 42ae9aab Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 131.188.4.191:20001, id=64, length=238 NAS-Port-Id = "2049/2" Calling-Station-Id = "00-90-4B-8F-B7-3B" Called-Station-Id = "00-0B-0E-03-00-42:FAU-SEC" Service-Type = Framed-User User-Name = "unrz148" State = 0x608c84a6c7bdebe161a378bf2712bbdb EAP-Message = 0x020700591900170301004e7e90b7c54598cc8f991d8641e6b01aaaeb889df18ef70a87a66f19687d685b759e0e27c406a9ff52a71ee0421866391250b4dcf6c017ca748ed4dced7211db8e09b2e395a308a4cc166730ad3de6 NAS-Identifier = "Trapeze" NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 131.188.4.191 Message-Authenticator = 0xc220272d9a037f0d9b77726394ccc47c Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 rlm_ldap: - authorize rlm_ldap: performing user authorization for unrz148 radius_xlat: '(Userid=unrz148)' radius_xlat: 'ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=AAAuser,o=Universitaet Erlangen-Nuernberg,c=DE, with filter (Userid=unrz148) rlm_ldap: checking if remote access for unrz148 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: Adding fauUserid as User-Password, value unrz148 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user unrz148 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 8 rlm_eap: EAP packet type response id 7 length 89 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 rlm_realm: No '@' in User-Name = "unrz148", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 8 modcall[authorize]: module "files" returns notfound for request 8 modcall: group authorize returns updated for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request not found in the list rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request rlm_eap: Failed in handler modcall[authenticate]: module "eap" returns invalid for request 8 modcall: group authenticate returns invalid for request 8 auth: Failed to validate the user. Login incorrect: [unrz148/<no User-Password attribute>] (from client airbrush port 0 cli 00-90-4B-8F-B7-3B) Delaying request 8 for 1 seconds Finished request 8 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 64 to 131.188.4.191:20001 Cleaning up request 8 ID 64 with timestamp 42ae9ab7 Nothing to do. Sleeping until we see a request.