I cannot get our Alvarion BS to assign service profiles to a MS. I have read the forums and tried to use that information to help, but I cannot get a service profile to be assigned. Our setup is as follows: FreeRADIUS AAA with MySQL database. The radgroupreply is: 8 | MLB_MS | Filter-ID | = | "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=ON" The radusergroup is: MLB_LAB_MS2@WiMax.com | MLB_MS | 1 | a sample from radiusd -x Access-Request: Access-Request packet from host 192.168.254.253 port 49154, id=109, length=258 User-Name = "{am=1}6ced97d91a6fcef3419e70f9c7ff34c1@WiMax.com" NAS-IP-Address = 192.168.254.253 NAS-Port-Type = 27 NAS-Port = 3 Calling-Station-Id = "\000\020\347A\\d" NAS-Identifier = "002002002000065002" WiMAX-GMT-Timezone-offset = 18000 Framed-MTU = 1490 Service-Type = Framed-User WiMAX-Release = "1.0" WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-BS-Id = 0x303032303032303032303030303635303032 EAP-Message = 0x02010035017b616d3d317d366365643937643931613666636566333431396537306639 63376666333463314057694d61782e636f6d Message-Authenticator = 0x4277326335201e6d8fa3f8a26a9311d7 Access-Accept: Sending Access-Accept of id 108 to 192.168.254.253 port 49154 Filter-Id = "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=OFF" WiMAX-FA-RK-Key = 0x00 WiMAX-MSK = 0x TTLS Reply: [ttls] Got tunneled reply code 2 Filter-Id = "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=ON" MS-CHAP2-Success = 0x98533d4133464334443937354642413645433943313532394132364331384437343743 4542313443453330 MS-MPPE-Recv-Key = 0x095bfcafbd7e6970eb5762a77b159f59 MS-MPPE-Send-Key = 0x4d060be03b8d2c8939627ade2f95c539 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 The most helpful information would be a guide on how to configure FreeRADIUS and the associated MySQL server to apply a service profile to a MS. Thanks for the help. Stuart Wilson Email: swilso19@harris.com