I’ve found a solution in authorize : comment "ok=return » in eap eap { # ok = return }
Le 22 oct. 2014 à 16:00, Stefan Paetow <Stefan.Paetow@ja.net> a écrit :
Are you using use_tunneled_reply?
Stefan Paetow Moonshot Industry & Research Liaison Coordinator
t: +44 (0)1235 822 125 gpg: 0x3FCE5142 xmpp: stefanp@jabber.dev.ja.net skype: stefan.paetow.janet
Janet, the UK’s research and education network.
Janet(UK) is a trading name of Jisc Collections and Janet Limited, a not-for-profit company which is registered in England under No. 2881024 and whose Registered Office is at Lumen House, Library Avenue, Harwell Oxford, Didcot, Oxfordshire. OX11 0SG. VAT No. 614944238
On 22 Oct 2014, at 13:59, Marc Boisis <marc.boisis@univ-lr.fr> wrote:
Hello,
The attribute « Tunnel-Private-Group-Id » is sent in an access challenge packet but never in the Access-Accept response, how can I have it in the access accept ? Thanks
Sending Access-Challenge of id 50 to 10.9.0.1 port 38933 Tunnel-Private-Group-Id:0 = "1" Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Type:0 = VLAN Class = 0x4f553d61646d696e3b EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x066c0c42066e157cccd2b11a53caf40e
Sending Access-Accept of id 61 to 10.9.0.1 port 38933 User-Name = "mdelavau\000" MS-MPPE-Recv-Key = 0xe9ac2590a2e51a4337dbabcf1a506eb3fce9d4823514315e383a85d526b4118c MS-MPPE-Send-Key = 0x99ecc593acf1721f395abf9d3e5b195edc16dd881842737d5cb3299fa77ca5ed EAP-Message = 0x030c0004 Message-Authenticator = 0x00000000000000000000000000000000
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html