Re: Computer/Machine Authentication almost working..

3 Apr 2023


      
...
On 3 Apr 2023, at 15:20, Tim ODriscoll <tim.odriscoll@lambrookschool.co.uk> wrote:
Dear All,
I'm nearly there (I think) getting machine auth working via ntlm_auth, but after following the documentation from both FR and the Samba Wiki, ntlm_auth isn't authenticating and giving me an error:
(7) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'
ntlm_auth is able to strip out the machine name correctly:
(7) mschap: EXPAND --username=%{mschap:User-Name}
(7) mschap:    --> --username=SL-6S4BBS3$
wbinfo tells me it's connected OK:
# wbinfo -t
checking the trust secret for domain MYDOMAIN via RPC calls succeeded
# wbinfo -p
Ping to winbindd succeeded
The winbindd_privilege directory is correct:
# ls -ld /var/lib/samba/winbindd_privileged/
drwxr-x---+ 2 root radiusd 18 Apr  1 21:39 /var/lib/samba/winbindd_privileged/
Samba's config has this on the member (FR) server and all the DCs:
        ntlm auth = mschapv2-and-ntlmv2-only
I understand ntlm_auth isn't supposed to be used on the CLI, so how can I test any further?
Where did you get that from? ntlm_auth works just fine from the terminal:

# ntlm_auth --username=testuser
Password:
NT_STATUS_OK: The operation completed successfully. (0x0)
...
Many thanks,
Tim
Full logs:
FreeRADIUS Version 3.2.2
Copyright (C) 1999-2022 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ldap
including configuration file /etc/raddb/mods-enabled/totp
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/ad_machine_auth
including configuration file /etc/raddb/policy.d/abfab-tr
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/rfc7542
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  allow_core_dumps = no
 }
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
postauth_client_lost = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
  allow_vulnerable_openssl = "no"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  nonblock = no
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
   max_connections = 16
   max_requests = 0
   lifetime = 0
   idle_timeout = 0
  }
  coa {
   irt = 2
   mrt = 16
   mrc = 5
   mrd = 30
  }
  recv_coa {
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
   max_connections = 16
   lifetime = 0
   idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
   max_connections = 16
   lifetime = 0
   idle_timeout = 30
  }
 }
 client 192.168.4.0/24 {
  ipaddr = 192.168.4.0/24
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "wifi_APs"
  limit {
   max_connections = 16
   lifetime = 0
   idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = ldap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
   rcode = "reject"
   simulcount = 0
   mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
   rcode = "fail"
   simulcount = 0
   mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
   rcode = "ok"
   simulcount = 0
   mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
   rcode = "handled"
   simulcount = 0
   mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
   rcode = "invalid"
   simulcount = 0
   mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
   rcode = "userlock"
   simulcount = 0
   mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
   rcode = "notfound"
   simulcount = 0
   mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
   rcode = "noop"
   simulcount = 0
   mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
   rcode = "updated"
   simulcount = 0
   mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
   filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
   key = "%{Realm}"
   relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
   filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
   key = "%{Realm}"
   relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
   filename = "/etc/raddb/mods-config/attr_filter/access_reject"
   key = "%{User-Name}"
   relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
   filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
   key = "%{User-Name}"
   relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
   filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
   key = "%{User-Name}"
   relaxed = no
  }
  # Loading module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
   filename = "/etc/raddb/mods-config/attr_filter/coa"
   key = "%{User-Name}"
   relaxed = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
   format = "%b %e %Y %H:%M:%S %Z"
   utc = no
  }
  # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
  date wispr2date {
   format = "%Y-%m-%dT%H:%M:%S"
   utc = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
   filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
   filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
   filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
   filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
   filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
   default_eap_type = "peap"
   timer_expire = 60
   ignore_unknown_eap_types = no
   cisco_accounting_username_bug = no
   max_sessions = 16384
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
   wait = yes
   program = "/bin/echo %{User-Name}"
   input_pairs = "request"
   output_pairs = "reply"
   shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
   wait = no
   input_pairs = "request"
   shell_escape = yes
   timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
   safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
   filename = "/etc/raddb/mods-config/files/authorize"
   acctusersfile = "/etc/raddb/mods-config/files/accounting"
   preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
   filename = "/var/log/radius/linelog"
   escape_filenames = no
   syslog_severity = "info"
   permissions = 384
   format = "This is a log message for %{User-Name}"
   reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
   filename = "/var/log/radius/linelog-accounting"
   escape_filenames = no
   syslog_severity = "info"
   permissions = 384
   format = ""
   reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
   minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
   use_mppe = yes
   require_encryption = no
   require_strong = no
   with_ntdomain_hack = yes
   ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --allow-mschapv2 --domain=MYDOMAIN --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
   passchange {
   }
   allow_retry = yes
   winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
   wait = yes
   program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
   shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
   normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
   filename = "/etc/passwd"
   format = "*User-Name:Crypt-Password:"
   delimiter = ":"
   ignore_nislike = no
   ignore_empty = yes
   allow_multiple_keys = no
   hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
   huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
   hints = "/etc/raddb/mods-config/preprocess/hints"
   with_ascend_hack = no
   ascend_channels_per_line = 23
   with_ntdomain_hack = no
   with_specialix_jetstream_hack = no
   with_cisco_vsa_hack = no
   with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
   filename = "/var/log/radius/radutmp"
   username = "%{User-Name}"
   case_sensitive = yes
   check_with_nas = yes
   permissions = 384
   caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
   format = "prefix"
   delimiter = "/"
   ignore_default = no
   ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
   format = "suffix"
   delimiter = "@"
   ignore_default = no
   ignore_null = no
  }
  # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
  realm bangpath {
   format = "prefix"
   delimiter = "!"
   ignore_default = no
   ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
   format = "suffix"
   delimiter = "%"
   ignore_default = no
   ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
   format = "prefix"
   delimiter = "\\"
   ignore_default = no
   ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
   dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
   filename = "/var/log/radius/sradutmp"
   username = "%{User-Name}"
   case_sensitive = yes
   check_with_nas = yes
   permissions = 420
   caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
   radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
  ldap {
   server = "ldaps://DC01.MYDOMAIN.co.uk"
   identity = "cn=MYADMIN,cn=users,dc=MYDOMAIN,dc=co,dc=uk"
   password = <<< secret >>>
   sasl {
   }
   user_dn = "LDAP-UserDn"
   user {
    scope = "sub"
    access_positive = yes
    sasl {
    }
   }
   group {
    filter = "(objectClass=group)"
    scope = "sub"
    name_attribute = "cn"
    membership_attribute = "memberOf"
    cacheable_name = no
    cacheable_dn = no
    allow_dangling_group_ref = no
   }
   client {
    filter = "(objectClass=radiusClient)"
    scope = "sub"
    base_dn = "dc=MYDOMAIN,dc=co,dc=uk"
   }
   profile {
   }
   options {
    ldap_debug = 40
    chase_referrals = yes
    rebind = yes
    net_timeout = 1
    res_timeout = 10
    srv_timelimit = 3
    idle = 60
    probes = 3
    interval = 3
   }
   tls {
    ca_file = "/etc/ssl/certs/dc01.pem"
    start_tls = no
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_totp
  # Loading module "totp" from file /etc/raddb/mods-enabled/totp
  instantiate {
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/coa
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    ca_path_reload_interval = 0
    cipher_list = "PROFILE=SYSTEM"
    cipher_server_preference = no
    reject_unknown_intermediate_ca = no
    ecdh_curve = "prime256v1"
    tls_max_version = "1.2"
    tls_min_version = "1.2"
    cache {
     enable = no
     lifetime = 24
     max_entries = 255
    }
    verify {
     skip_if_ocsp_ok = no
    }
    ocsp {
     enable = no
     override_cert_url = yes
     url = "http://127.0.0.1/ocsp/"
     use_nonce = yes
     timeout = 0
     softfail = no
    }
   }
tls: Setting DH parameters from /etc/raddb/certs/dh - this is no longer necessary.
tls: You should comment out the 'dh_file' configuration item.
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = yes
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20602
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
    reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
    start = 5
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 30
    spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
   type = "auth"
   ipaddr = *
   port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
   type = "acct"
   ipaddr = *
   port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
   type = "auth"
   ipv6addr = ::
   port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
   type = "acct"
   ipv6addr = ::
   port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
   type = "auth"
   ipaddr = 127.0.0.1
   port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 60410
Listening on proxy address :: port 59954
Ready to process requests
(0) Received Access-Request Id 202 from 192.168.4.183:40744 to 192.168.15.22:1812 length 250
(0)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(0)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   NAS-Port = 1
(0)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(0)   Connect-Info = "CONNECT 54Mbps 802.11a"
(0)   Acct-Session-Id = "7AF5DECDA3D1020E"
(0)   WLAN-Pairwise-Cipher = 1027076
(0)   WLAN-Group-Cipher = 1027076
(0)   WLAN-AKM-Suite = 1027073
(0)   Framed-MTU = 1400
(0)   EAP-Message = 0x02e0002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
(0)   Message-Authenticator = 0x45339dcf5ff0be628a0d52434270ef14
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 224 length 41
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_peap to process data
(0) eap_peap: (TLS) Initiating new session
(0) eap: Sending EAP Request (code 1) ID 225 length 6
(0) eap: EAP session adding &reply:State = 0xa2f91851a21801a2
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 994
(0) Sent Access-Challenge Id 202 from 192.168.15.22:1812 to 192.168.4.183:40744 length 64
(0)   EAP-Message = 0x01e100061920
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xa2f91851a21801a2ba9496e09aa2d64c
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 203 from 192.168.4.183:40744 to 192.168.15.22:1812 length 490
(1)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(1)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   NAS-Port = 1
(1)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(1)   Connect-Info = "CONNECT 54Mbps 802.11a"
(1)   Acct-Session-Id = "7AF5DECDA3D1020E"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027073
(1)   Framed-MTU = 1400
(1)   EAP-Message = 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
(1)   State = 0xa2f91851a21801a2ba9496e09aa2d64c
(1)   Message-Authenticator = 0x30f9339b97df8bdf7f26f3b7d10837b2
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 994
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 225 length 261
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xa2f91851a21801a2
(1) eap: Finished EAP session with state 0xa2f91851a21801a2
(1) eap: Previous EAP request found for state 0xa2f91851a21801a2, released from the list
(1) eap: Peer sent packet with method EAP PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: (TLS) EAP Peer says that the final record size will be 251 bytes
(1) eap_peap: (TLS) EAP Got all data (251 bytes)
(1) eap_peap: (TLS) Handshake state - before SSL initialization
(1) eap_peap: (TLS) Handshake state - Server before SSL initialization
(1) eap_peap: (TLS) Handshake state - Server before SSL initialization
(1) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello
(1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello
(1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello
(1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello
(1) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate
(1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate
(1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange
(1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange
(1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone
(1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(1) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server done
(1) eap_peap: (TLS) In Handshake Phase
(1) eap: Sending EAP Request (code 1) ID 226 length 1004
(1) eap: EAP session adding &reply:State = 0xa2f91851a31b01a2
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 994
(1)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(1) Sent Access-Challenge Id 203 from 192.168.15.22:1812 to 192.168.4.183:40744 length 1068
(1)   EAP-Message = 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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xa2f91851a31b01a2ba9496e09aa2d64c
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 204 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233
(2)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(2)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   NAS-Port = 1
(2)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(2)   Connect-Info = "CONNECT 54Mbps 802.11a"
(2)   Acct-Session-Id = "7AF5DECDA3D1020E"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027073
(2)   Framed-MTU = 1400
(2)   EAP-Message = 0x02e200061900
(2)   State = 0xa2f91851a31b01a2ba9496e09aa2d64c
(2)   Message-Authenticator = 0xfea378d7277662d4cec6efee65f205db
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 994
(2)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 226 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xa2f91851a31b01a2
(2) eap: Finished EAP session with state 0xa2f91851a31b01a2
(2) eap: Previous EAP request found for state 0xa2f91851a31b01a2, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: (TLS) Peer ACKed our handshake fragment
(2) eap: Sending EAP Request (code 1) ID 227 length 1000
(2) eap: EAP session adding &reply:State = 0xa2f91851a01a01a2
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 994
(2)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(2) Sent Access-Challenge Id 204 from 192.168.15.22:1812 to 192.168.4.183:40744 length 1064
(2)   EAP-Message = 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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xa2f91851a01a01a2ba9496e09aa2d64c
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 205 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233
(3)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(3)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   NAS-Port = 1
(3)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(3)   Connect-Info = "CONNECT 54Mbps 802.11a"
(3)   Acct-Session-Id = "7AF5DECDA3D1020E"
(3)   WLAN-Pairwise-Cipher = 1027076
(3)   WLAN-Group-Cipher = 1027076
(3)   WLAN-AKM-Suite = 1027073
(3)   Framed-MTU = 1400
(3)   EAP-Message = 0x02e300061900
(3)   State = 0xa2f91851a01a01a2ba9496e09aa2d64c
(3)   Message-Authenticator = 0xb714bedc489537ab5e91cc8e6bad6172
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 994
(3)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 227 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xa2f91851a01a01a2
(3) eap: Finished EAP session with state 0xa2f91851a01a01a2
(3) eap: Previous EAP request found for state 0xa2f91851a01a01a2, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 228 length 804
(3) eap: EAP session adding &reply:State = 0xa2f91851a11d01a2
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 994
(3)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(3) Sent Access-Challenge Id 205 from 192.168.15.22:1812 to 192.168.4.183:40744 length 868
(3)   EAP-Message = 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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xa2f91851a11d01a2ba9496e09aa2d64c
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 206 from 192.168.4.183:40744 to 192.168.15.22:1812 length 363
(4)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(4)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   NAS-Port = 1
(4)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(4)   Connect-Info = "CONNECT 54Mbps 802.11a"
(4)   Acct-Session-Id = "7AF5DECDA3D1020E"
(4)   WLAN-Pairwise-Cipher = 1027076
(4)   WLAN-Group-Cipher = 1027076
(4)   WLAN-AKM-Suite = 1027073
(4)   Framed-MTU = 1400
(4)   EAP-Message = 0x02e4008819800000007e1603030046100000424104fc700b1b8bfa32368426118e9a80c3f39ff815218590aed58e2c75581537f83192c25765f7180aee560c91d163e877dc0c291383f8b81220fe3e6f7575208c681403030001011603030028000000000000000018c81880c82d0c93acf0f409f08a98d6f7cdb13357292280e9ea23dce17c1c1f
(4)   State = 0xa2f91851a11d01a2ba9496e09aa2d64c
(4)   Message-Authenticator = 0xf11fb09ed5dab5550ed5f5cb3162d479
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 994
(4)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 228 length 136
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xa2f91851a11d01a2
(4) eap: Finished EAP session with state 0xa2f91851a11d01a2
(4) eap: Previous EAP request found for state 0xa2f91851a11d01a2, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: (TLS) EAP Peer says that the final record size will be 126 bytes
(4) eap_peap: (TLS) EAP Got all data (126 bytes)
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key exchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished
(4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec
(4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished
(4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully
(4) eap_peap: (TLS) Connection Established
(4) eap_peap:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) eap_peap:   TLS-Session-Version = "TLS 1.2"
(4) eap: Sending EAP Request (code 1) ID 229 length 57
(4) eap: EAP session adding &reply:State = 0xa2f91851a61c01a2
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 994
(4)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(4)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4)   TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 206 from 192.168.15.22:1812 to 192.168.4.183:40744 length 115
(4)   EAP-Message = 0x01e50039190014030300010116030300280292373b404e0822b6ddf83ac8081a30eb64150d72404bab3ca5526bb2d137e1875654b13c8fff88
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xa2f91851a61c01a2ba9496e09aa2d64c
(4) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 202 with timestamp +13 due to cleanup_delay was reached
(1) Cleaning up request packet ID 203 with timestamp +13 due to cleanup_delay was reached
(2) Cleaning up request packet ID 204 with timestamp +13 due to cleanup_delay was reached
(3) Cleaning up request packet ID 205 with timestamp +13 due to cleanup_delay was reached
(4) Cleaning up request packet ID 206 with timestamp +13 due to cleanup_delay was reached
Ready to process requests
(5) Received Access-Request Id 207 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233
(5)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(5)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   NAS-Port = 1
(5)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(5)   Connect-Info = "CONNECT 54Mbps 802.11a"
(5)   Acct-Session-Id = "7AF5DECDA3D1020E"
(5)   WLAN-Pairwise-Cipher = 1027076
(5)   WLAN-Group-Cipher = 1027076
(5)   WLAN-AKM-Suite = 1027073
(5)   Framed-MTU = 1400
(5)   EAP-Message = 0x02e500061900
(5)   State = 0xa2f91851a61c01a2ba9496e09aa2d64c
(5)   Message-Authenticator = 0x1d3e1b0836f981270aa2af2af7314781
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 994
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 229 length 6
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xa2f91851a61c01a2
(5) eap: Finished EAP session with state 0xa2f91851a61c01a2
(5) eap: Previous EAP request found for state 0xa2f91851a61c01a2, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: (TLS) Peer ACKed our handshake fragment.  handshake is finished
(5) eap_peap: Session established.  Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 230 length 40
(5) eap: EAP session adding &reply:State = 0xa2f91851a71f01a2
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 994
(5)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 207 from 192.168.15.22:1812 to 192.168.4.183:40744 length 98
(5)   EAP-Message = 0x01e600281900170303001d0292373b404e0823111eedee248c54e45d29e31b55efe08388ffb49d22
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xa2f91851a71f01a2ba9496e09aa2d64c
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 208 from 192.168.4.183:40744 to 192.168.15.22:1812 length 299
(6)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(6)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   NAS-Port = 1
(6)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(6)   Connect-Info = "CONNECT 54Mbps 802.11a"
(6)   Acct-Session-Id = "7AF5DECDA3D1020E"
(6)   WLAN-Pairwise-Cipher = 1027076
(6)   WLAN-Group-Cipher = 1027076
(6)   WLAN-AKM-Suite = 1027073
(6)   Framed-MTU = 1400
(6)   EAP-Message = 0x02e600481900170303003d000000000000000126dac151e748c5a28bcdde71e8e363af45675c1edb834d7414a4bafc3252d3c375b7322505386e598cbb1913ce51ffdf55ace14beb
(6)   State = 0xa2f91851a71f01a2ba9496e09aa2d64c
(6)   Message-Authenticator = 0x5570ed7a63c1c77a44a515eb23753651
(6) Restoring &session-state
(6)   &session-state:Framed-MTU = 994
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 230 length 72
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0xa2f91851a71f01a2
(6) eap: Finished EAP session with state 0xa2f91851a71f01a2
(6) eap: Previous EAP request found for state 0xa2f91851a71f01a2, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: (TLS) EAP Done initial handshake
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - host/SL-6S4BBS3.MYDOMAIN.co.uk
(6) eap_peap: Got inner identity 'host/SL-6S4BBS3.MYDOMAIN.co.uk'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap:   EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
(6) eap_peap: Setting User-Name to host/SL-6S4BBS3.MYDOMAIN.co.uk
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap:   EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
(6) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap:   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(6) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       policy ad_computer_username {
(6)         if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) {
(6)         if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/))  -> TRUE
(6)         if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/))  {
(6)           update request {
(6)             EXPAND %{1}$
(6)                --> SL-6S4BBS3$
(6)             &Stripped-User-Name := SL-6S4BBS3$
(6)           } # update request = noop
(6)           if ("%{3}" != '') {
(6)           EXPAND %{3}
(6)              --> MYDOMAIN.co.uk
(6)           if ("%{3}" != '')  -> TRUE
(6)           if ("%{3}" != '')  {
(6)             update request {
(6)               EXPAND %{3}
(6)                  --> MYDOMAIN.co.uk
(6)               &Stripped-User-Domain = MYDOMAIN.co.uk
(6)               EXPAND %{3}
(6)                  --> MYDOMAIN.co.uk
(6)               &realm := MYDOMAIN.co.uk
(6)             } # update request = noop
(6)           } # if ("%{3}" != '')  = noop
(6)           [updated] = updated
(6)         } # if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/))  = updated
(6)         ... skipping else: Preceding "if" was taken
(6)       } # policy ad_computer_username = updated
(6)       policy filter_inner_identity {
(6)         if (!&outer.request:User-Name || !&User-Name) {
(6)         if (!&outer.request:User-Name || !&User-Name)  -> FALSE
(6)         if (&outer.request:User-Name != &User-Name) {
(6)         if (&outer.request:User-Name != &User-Name)  -> FALSE
(6)       } # policy filter_inner_identity = updated
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Request already has destination realm set.  Ignoring
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 230 length 41
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 231 length 42
(6) eap: EAP session adding &reply:State = 0xede77fe3ed00658b
(6)       [eap] = handled
(6)     } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xede77fe3ed00658b2611adfefd1eb95e
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap:   EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0xede77fe3ed00658b2611adfefd1eb95e
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap:   EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0xede77fe3ed00658b2611adfefd1eb95e
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 231 length 73
(6) eap: EAP session adding &reply:State = 0xa2f91851a41e01a2
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6)   Framed-MTU = 994
(6)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 208 from 192.168.15.22:1812 to 192.168.4.183:40744 length 131
(6)   EAP-Message = 0x01e700491900170303003e0292373b404e0824f68f6f9a55e22ab49ff88824830541895f006aace7eeff05416d88319fa5ff9a8f676fe7b7d1865a1a5dd5d02d8360dda3e2fa05f6f7
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xa2f91851a41e01a2ba9496e09aa2d64c
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 209 from 192.168.4.183:40744 to 192.168.15.22:1812 length 353
(7)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(7)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   NAS-Port = 1
(7)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(7)   Connect-Info = "CONNECT 54Mbps 802.11a"
(7)   Acct-Session-Id = "7AF5DECDA3D1020E"
(7)   WLAN-Pairwise-Cipher = 1027076
(7)   WLAN-Group-Cipher = 1027076
(7)   WLAN-AKM-Suite = 1027073
(7)   Framed-MTU = 1400
(7)   EAP-Message = 0x02e7007e1900170303007300000000000000027b9322e534889e59cf73b49f78b04f94dde670f8ab5b1498810d5c67eb341706c1481bdb3e899835ad498d113a934782396acee4975a42eff342319baabd11f32833e1bb90543f6569ab798880a12f9b696c2eaa0af0d1e4c8b09d9248a72ab408acde5ec010a39d71757b
(7)   State = 0xa2f91851a41e01a2ba9496e09aa2d64c
(7)   Message-Authenticator = 0xa9e9e786e494d085735ff5c7c065a11f
(7) Restoring &session-state
(7)   &session-state:Framed-MTU = 994
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(7)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7)   &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 231 length 126
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0xede77fe3ed00658b
(7) eap: Finished EAP session with state 0xa2f91851a41e01a2
(7) eap: Previous EAP request found for state 0xa2f91851a41e01a2, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: (TLS) EAP Done initial handshake
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
(7) eap_peap: Setting User-Name to host/SL-6S4BBS3.MYDOMAIN.co.uk
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(7) eap_peap:   State = 0xede77fe3ed00658b2611adfefd1eb95e
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(7)   State = 0xede77fe3ed00658b2611adfefd1eb95e
(7) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(7) server inner-tunnel {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       policy ad_computer_username {
(7)         if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) {
(7)         if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/))  -> TRUE
(7)         if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/))  {
(7)           update request {
(7)             EXPAND %{1}$
(7)                --> SL-6S4BBS3$
(7)             &Stripped-User-Name := SL-6S4BBS3$
(7)           } # update request = noop
(7)           if ("%{3}" != '') {
(7)           EXPAND %{3}
(7)              --> MYDOMAIN.co.uk
(7)           if ("%{3}" != '')  -> TRUE
(7)           if ("%{3}" != '')  {
(7)             update request {
(7)               EXPAND %{3}
(7)                  --> MYDOMAIN.co.uk
(7)               &Stripped-User-Domain = MYDOMAIN.co.uk
(7)               EXPAND %{3}
(7)                  --> MYDOMAIN.co.uk
(7)               &realm := MYDOMAIN.co.uk
(7)             } # update request = noop
(7)           } # if ("%{3}" != '')  = noop
(7)           [updated] = updated
(7)         } # if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/))  = updated
(7)         ... skipping else: Preceding "if" was taken
(7)       } # policy ad_computer_username = updated
(7)       policy filter_inner_identity {
(7)         if (!&outer.request:User-Name || !&User-Name) {
(7)         if (!&outer.request:User-Name || !&User-Name)  -> FALSE
(7)         if (&outer.request:User-Name != &User-Name) {
(7)         if (&outer.request:User-Name != &User-Name)  -> FALSE
(7)       } # policy filter_inner_identity = updated
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Request already has destination realm set.  Ignoring
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 231 length 95
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7) files: Searching for user in group "CN=staff,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
rlm_ldap (ldap): Reserved connection (0)
(7) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}})
(7) files:    --> (samaccountname=SL-6S4BBS3$)
(7) files: Performing search in "dc=MYDOMAIN,dc=co,dc=uk" with filter "(samaccountname=SL-6S4BBS3$)", scope "sub"
(7) files: Waiting for search result...
ber_get_next failed, errno=11.
TLS certificate verification: Error, unable to get local issuer certificate
rlm_ldap (ldap): Rebinding to URL ldaps://MYDOMAIN.co.uk/CN=Configuration,DC=MYDOMAIN,DC=co,DC=uk
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7) files: User object found at DN "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk"
(7) files: Checking user object's memberOf attributes
(7) files:   Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base"
(7) files:   Waiting for search result...
(7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN
rlm_ldap (ldap): Released connection (0)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7) files: User is not a member of "CN=staff,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
(7) files: Searching for user in group "CN=students,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
rlm_ldap (ldap): Reserved connection (1)
(7) files: Using user DN from request "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk"
(7) files: Checking user object's memberOf attributes
(7) files:   Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base"
(7) files:   Waiting for search result...
(7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN
rlm_ldap (ldap): Released connection (1)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used
rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7) files: User is not a member of "CN=students,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
(7) files: Searching for user in group "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
rlm_ldap (ldap): Reserved connection (2)
(7) files: Using user DN from request "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk"
(7) files: Checking user object's memberOf attributes
(7) files:   Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base"
(7) files:   Waiting for search result...
(7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN
(7) files: User found in group DN "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk". Comparison between membership: dn, check: dn
rlm_ldap (ldap): Released connection (2)
(7) files: users: Matched entry DEFAULT at line 11
(7)       [files] = ok
rlm_ldap (ldap): Reserved connection (3)
(7) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap:    --> (samaccountname=SL-6S4BBS3$)
(7) ldap: Performing search in "dc=MYDOMAIN,dc=co,dc=uk" with filter "(samaccountname=SL-6S4BBS3$)", scope "sub"
(7) ldap: Waiting for search result...
rlm_ldap (ldap): Rebinding to URL ldaps://MYDOMAIN.co.uk/CN=Configuration,DC=MYDOMAIN,DC=co,DC=uk
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7) ldap: User object found at DN "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk"
(7) ldap: Processing user attributes
(7) ldap: WARNING: No "known good" password added. Ensure the MYADMIN user has permission to read the password attribute
(7) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (3)
(7)       [ldap] = ok
(7)       [expiration] = noop
(7)       [logintime] = noop
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Expiring EAP session with state 0xede77fe3ed00658b
(7) eap: Finished EAP session with state 0xede77fe3ed00658b
(7) eap: Previous EAP request found for state 0xede77fe3ed00658b, released from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7) eap_mschapv2:   authenticate {
(7) mschap: Creating challenge hash with username: host/SL-6S4BBS3.MYDOMAIN.co.uk
(7) mschap: Client is using MS-CHAPv2
(7) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --allow-mschapv2 --domain=MYDOMAIN --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}:
(7) mschap: EXPAND --username=%{mschap:User-Name}
(7) mschap:    --> --username=SL-6S4BBS3$
(7) mschap: Creating challenge hash with username: host/SL-6S4BBS3.MYDOMAIN.co.uk
(7) mschap: EXPAND --challenge=%{mschap:Challenge:-00}
(7) mschap:    --> --challenge=eab8de792c4017e7
(7) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00}
(7) mschap:    --> --nt-response=a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd
(7) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'
(7) mschap: External script failed
(7) mschap: ERROR: External script says: The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)
(7) mschap: ERROR: MS-CHAP2-Response is incorrect
(7) eap_mschapv2:     [mschap] = reject
(7) eap_mschapv2:   } # authenticate = reject
(7) eap: Sending EAP Failure (code 4) ID 231 length 4
(7) eap: Freeing handler
(7)       [eap] = reject
(7)     } # authenticate = reject
(7)   Failed to authenticate the user
(7)   Using Post-Auth-Type Reject
(7)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7)     Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject:    --> host/SL-6S4BBS3.MYDOMAIN.co.uk
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7)       [attr_filter.access_reject] = updated
(7)       update outer.session-state {
(7)         &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: Program returned code (1) and output \'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)\''
(7)       } # update outer.session-state = noop
(7)     } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected"
(7)   EAP-Message = 0x04e70004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply code 3
(7) eap_peap:   MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected"
(7) eap_peap:   EAP-Message = 0x04e70004
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply RADIUS code 3
(7) eap_peap:   MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected"
(7) eap_peap:   EAP-Message = 0x04e70004
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Tunneled authentication was rejected
(7) eap_peap: FAILURE
(7) eap: Sending EAP Request (code 1) ID 232 length 46
(7) eap: EAP session adding &reply:State = 0xa2f91851a51101a2
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7)   Framed-MTU = 994
(7)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(7)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(7)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(7)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7)   TLS-Session-Version = "TLS 1.2"
(7)   Module-Failure-Message := "mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'"
(7) Sent Access-Challenge Id 209 from 192.168.15.22:1812 to 192.168.4.183:40744 length 104
(7)   EAP-Message = 0x01e8002e190017030300230292373b404e0825e3a4e9c5f699e6fe4e5edeebdd618ae26ccc847c29515b2490b95f
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xa2f91851a51101a2ba9496e09aa2d64c
(7) Finished request
Waking up in 4.6 seconds.
(8) Received Access-Request Id 210 from 192.168.4.183:40744 to 192.168.15.22:1812 length 273
(8)   User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
(8)   Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   NAS-Port = 1
(8)   Calling-Station-Id = "28-6B-35-4F-46-BF"
(8)   Connect-Info = "CONNECT 54Mbps 802.11a"
(8)   Acct-Session-Id = "7AF5DECDA3D1020E"
(8)   WLAN-Pairwise-Cipher = 1027076
(8)   WLAN-Group-Cipher = 1027076
(8)   WLAN-AKM-Suite = 1027073
(8)   Framed-MTU = 1400
(8)   EAP-Message = 0x02e8002e190017030300230000000000000003ea33017147c3302fdd480b9bd7a1ca0fd7ba7737df755ffe4ea240
(8)   State = 0xa2f91851a51101a2ba9496e09aa2d64c
(8)   Message-Authenticator = 0x03f0ffd538cbbb486e3851ef134e7a75
(8) Restoring &session-state
(8)   &session-state:Framed-MTU = 994
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(8)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(8)   &session-state:TLS-Session-Version = "TLS 1.2"
(8)   &session-state:Module-Failure-Message := "mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'"
(8) # Executing section authorize from file /etc/raddb/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 232 length 46
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0xa2f91851a51101a2
(8) eap: Finished EAP session with state 0xa2f91851a51101a2
(8) eap: Previous EAP request found for state 0xa2f91851a51101a2, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: (TLS) EAP Done initial handshake
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state send tlv failure
(8) eap_peap: Received EAP-TLV response
(8) eap_peap:   ERROR: The users session was previously rejected: returning reject (again.)
(8) eap_peap:   This means you need to read the PREVIOUS messages in the debug output
(8) eap_peap:   to find out the reason why the user was rejected
(8) eap_peap:   Look for "reject" or "fail".  Those earlier messages will tell you
(8) eap_peap:   what went wrong, and how to fix the problem
(8) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module failed
(8) eap: Sending EAP Failure (code 4) ID 232 length 4
(8) eap: Failed in EAP select
(8)     [eap] = invalid
(8)   } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8)   Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject:    --> host/SL-6S4BBS3.MYDOMAIN.co.uk
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8)     [attr_filter.access_reject] = updated
(8)     [eap] = noop
(8)     policy remove_reply_message_if_eap {
(8)       if (&reply:EAP-Message && &reply:Reply-Message) {
(8)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(8)       else {
(8)         [noop] = noop
(8)       } # else = noop
(8)     } # policy remove_reply_message_if_eap = noop
(8)   } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(8) Sending delayed response
(8) Sent Access-Reject Id 210 from 192.168.15.22:1812 to 192.168.4.183:40744 length 44
(8)   EAP-Message = 0x04e80004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.6 seconds.
(5) Cleaning up request packet ID 207 with timestamp +24 due to cleanup_delay was reached
(6) Cleaning up request packet ID 208 with timestamp +24 due to cleanup_delay was reached
Waking up in 0.3 seconds.
(7) Cleaning up request packet ID 209 with timestamp +24 due to cleanup_delay was reached
(8) Cleaning up request packet ID 210 with timestamp +25 due to cleanup_delay was reached
Ready to process requests
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Re: Computer/Machine Authentication almost working..

Kristofer Hallin