Re: I encountered the problem that there is an account in the database, but the authentication process feedback does not exist. Please help.

13 Dec 2023

      Hi,everyone！
  Many thanks to Alan DeKok and Matthew for their previous help！ Especially
the link provided by Matthew: https://knowledge.h3c.com/Theme/details/191858,
which allowed me to discover and solve part of the problem, that is, H3C
switches must be configured with authentication and authorization at the
same time, as well as the authorization problem after login.
  But I encountered a new problem: the switch authentication log showed
that the authentication had passed, but after passing the authentication,
the switch automatically closed the ssh session. I didn't find out the
specific problem from the radius debugging information and wireshark packet
capture, so I ask for your advice.
  *The following is freeradius debugging：*
Waking up in 4.9 seconds.
(8) Received Access-Request Id 120 from 192.168.1.1:38272 to
192.168.1.188:1812 length 216
(8)   User-Name = "testuser"
(8)   NAS-Identifier = "Test-4F-D-V16-37U-S6812"
(8)   Acct-Session-Id = "0000000106202307220000000108000026210"
(8)   User-Password = "testpass"
(8)   Calling-Station-Id = "192.168.1.188"
(8)   NAS-Port-Type = Virtual
(8)   H3C-NAS-Port-Name = "M-GigabitEthernet0/0/0"
(8)   Framed-IP-Address = 192.168.1.188
(8)   Service-Type = Login-User
(8)   NAS-IP-Address = 192.168.1.1
(8)   H3C-Product-ID = "H3C S6812-48X6C"
(8)   H3C-NAS-Startup-Timestamp = 1609459214
(8) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "testuser", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: No EAP-Message, not doing EAP
(8)     [eap] = noop
(8)     [files] = noop
(8) sql: EXPAND %{User-Name}
(8) sql:    --> testuser
(8) sql: SQL-User-Name set to 'testuser'
rlm_sql (sql): Reserved connection (0)
(8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(8) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'testuser' ORDER BY id
(8) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'testuser' ORDER BY id
(8) sql: User found in radcheck table
(8) sql: Conditional check items matched, merging assignment check items
(8) sql:   Cleartext-Password := "testpass"
(8) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(8) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'testuser' ORDER BY id
(8) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'testuser' ORDER BY id
(8) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(8) sql:    --> SELECT groupname FROM radusergroup WHERE username =
'testuser' ORDER BY priority
(8) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'testuser' ORDER BY priority
(8) sql: User not found in any groups
rlm_sql (sql): Released connection (0)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (13), 1 of 26 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB, protocol version 10
(8)     [sql] = ok
(8)     [expiration] = noop
(8)     [logintime] = noop
(8)     [pap] = updated
(8)   } # authorize = updated
(8) Found Auth-Type = PAP
(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(8)   Auth-Type PAP {
(8) pap: Login attempt with password
(8) pap: Comparing with "known good" Cleartext-Password
(8) pap: User authenticated successfully
(8)     [pap] = ok
(8)   } # Auth-Type PAP = ok
(8) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/default
(8)   post-auth {
(8)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {
(8)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name))  -> FALSE
(8)     update {
(8)       No attributes updated for RHS &session-state:
(8)     } # update = noop
(8) sql: EXPAND .query
(8) sql:    --> .query
(8) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (11)
(8) sql: EXPAND %{User-Name}
(8) sql:    --> testuser
(8) sql: SQL-User-Name set to 'testuser'
(8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )
(8) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( 'testuser', 'testpass', 'Access-Accept', '2023-12-13
17:55:15.084332' )
(8) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate ) VALUES ( 'testuser', 'testpass', 'Access-Accept', '2023-12-13
17:55:15.084332' )
(8) sql: SQL query returned: success
(8) sql: 1 record(s) updated
rlm_sql (sql): Released connection (11)
(8)     [sql] = ok
(8)     [exec] = noop
(8)     policy remove_reply_message_if_eap {
(8)       if (&reply:EAP-Message && &reply:Reply-Message) {
(8)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(8)       else {
(8)         [noop] = noop
(8)       } # else = noop
(8)     } # policy remove_reply_message_if_eap = noop
(8)     if (EAP-Key-Name && &reply:EAP-Session-Id) {
(8)     if (EAP-Key-Name && &reply:EAP-Session-Id)  -> FALSE
(8)   } # post-auth = ok
(8) Sent Access-Accept Id 120 from 192.168.1.188:1812 to 192.168.1.1:38272
length 20
(8) Finished request
Waking up in 0.5 seconds.
(7) Cleaning up request packet ID 119 with timestamp +611 due to
cleanup_delay was reached
Waking up in 4.4 seconds.
(9) Received Access-Request Id 147 from 192.168.1.1:38272 to
192.168.1.188:1812 length 216
(9)   User-Name = "testuser"
(9)   NAS-Identifier = "Test-4F-D-V16-37U-S6812"
(9)   Acct-Session-Id = "0000000106202307260000000108000026217"
(9)   User-Password = "testpass"
(9)   Calling-Station-Id = "192.168.1.188"
(9)   NAS-Port-Type = Virtual
(9)   H3C-NAS-Port-Name = "M-GigabitEthernet0/0/0"
(9)   Framed-IP-Address = 192.168.1.188
(9)   Service-Type = Login-User
(9)   NAS-IP-Address = 192.168.1.1
(9)   H3C-Product-ID = "H3C S6812-48X6C"
(9)   H3C-NAS-Startup-Timestamp = 1609459214
(9) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(9)   authorize {
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = notfound
(9)     } # policy filter_username = notfound
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "testuser", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: No EAP-Message, not doing EAP
(9)     [eap] = noop
(9)     [files] = noop
(9) sql: EXPAND %{User-Name}
(9) sql:    --> testuser
(9) sql: SQL-User-Name set to 'testuser'
rlm_sql (sql): Reserved connection (8)
(9) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(9) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'testuser' ORDER BY id
(9) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'testuser' ORDER BY id
(9) sql: User found in radcheck table
(9) sql: Conditional check items matched, merging assignment check items
(9) sql:   Cleartext-Password := "testpass"
(9) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(9) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'testuser' ORDER BY id
(9) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'testuser' ORDER BY id
(9) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(9) sql:    --> SELECT groupname FROM radusergroup WHERE username =
'testuser' ORDER BY priority
(9) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'testuser' ORDER BY priority
(9) sql: User not found in any groups
rlm_sql (sql): Released connection (8)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (14), 1 of 25 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB, protocol version 10
(9)     [sql] = ok
(9)     [expiration] = noop
(9)     [logintime] = noop
(9)     [pap] = updated
(9)   } # authorize = updated
(9) Found Auth-Type = PAP
(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(9)   Auth-Type PAP {
(9) pap: Login attempt with password
(9) pap: Comparing with "known good" Cleartext-Password
(9) pap: User authenticated successfully
(9)     [pap] = ok
(9)   } # Auth-Type PAP = ok
(9) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/default
(9)   post-auth {
(9)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {
(9)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name))  -> FALSE
(9)     update {
(9)       No attributes updated for RHS &session-state:
(9)     } # update = noop
(9) sql: EXPAND .query
(9) sql:    --> .query
(9) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (10)
(9) sql: EXPAND %{User-Name}
(9) sql:    --> testuser
(9) sql: SQL-User-Name set to 'testuser'
(9) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )
(9) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( 'testuser', 'testpass', 'Access-Accept', '2023-12-13
17:55:19.697824' )
(9) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate ) VALUES ( 'testuser', 'testpass', 'Access-Accept', '2023-12-13
17:55:19.697824' )
(9) sql: SQL query returned: success
(9) sql: 1 record(s) updated
rlm_sql (sql): Released connection (10)
(9)     [sql] = ok
(9)     [exec] = noop
(9)     policy remove_reply_message_if_eap {
(9)       if (&reply:EAP-Message && &reply:Reply-Message) {
(9)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(9)       else {
(9)         [noop] = noop
(9)       } # else = noop
(9)     } # policy remove_reply_message_if_eap = noop
(9)     if (EAP-Key-Name && &reply:EAP-Session-Id) {
(9)     if (EAP-Key-Name && &reply:EAP-Session-Id)  -> FALSE
(9)   } # post-auth = ok
(9) Sent Access-Accept Id 147 from 192.168.1.188:1812 to 192.168.1.1:38272
length 20
(9) Finished request
Waking up in 0.3 seconds.
(8) Cleaning up request packet ID 120 with timestamp +616 due to
cleanup_delay was reached
Waking up in 4.6 seconds.
(9) Cleaning up request packet ID 147 with timestamp +620 due to
cleanup_delay was reached
Ready to process requests

*The following is the switch：*
Test-4F-D-V16-37U-S6812 SSHS/6/SSHS_AUTH_SUCCESS: SSH user testuser from
192.168.1.188 port 60208 passed password authentication.
Test-4F-D-V16-37U-S6812 SSHS/6/SSHS_CONNECT: SSH user testuser (IP:
192.168.1.188) connected to the server successfully.
Test-4F-D-V16-37U-S6812 SSHS/6/SSHS_DISCONNECT: SSH user testuser (IP:
192.168.1.188) disconnected from the server.

*The following is the packet capture information：*
RADIUS Protocol
    Code: Access-Request (1)
    Packet identifier: 0x53 (83)
    Length: 216
    Authenticator: 99ac8a024f1b61591a1bfca82d9e06ac
    [The response to this request is in frame 798]
    Attribute Value Pairs
        AVP: t=User-Name(1) l=10 val=testuser
        AVP: t=NAS-Identifier(32) l=26 val=Test-4F-D-V16-37U-S6812
        AVP: t=Acct-Session-Id(44) l=39
val=0000000106202148490000000108000005546
        AVP: t=User-Password(2) l=18 val=Encrypted
        AVP: t=Calling-Station-Id(31) l=14 val=192.168.1.188
        AVP: t=NAS-Port-Type(61) l=6 val=Virtual(5)
        AVP: t=Vendor-Specific(26) l=30 vnd=H3C(25506)
            Type: 26
            Length: 30
            Vendor ID: H3C (25506)
            VSA: t=NAS-Port-Name(230) l=24 val=M-GigabitEthernet0/0/0
                Type: 230
                Length: 24
                NAS-Port-Name: M-GigabitEthernet0/0/0
        AVP: t=Framed-IP-Address(8) l=6 val=192.168.1.188
            Type: 8
            Length: 6
            Framed-IP-Address: 192.168.1.188
        AVP: t=Service-Type(6) l=6 val=Login(1)
            Type: 6
            Length: 6
            Service-Type: Login (1)
        AVP: t=NAS-IP-Address(4) l=6 val=192.168.1.1
            Type: 4
            Length: 6
            NAS-IP-Address: 192.168.1.1
        AVP: t=Vendor-Specific(26) l=23 vnd=H3C(25506)
            Type: 26
            Length: 23
            Vendor ID: H3C (25506)
            VSA: t=Product-ID(255) l=17 val=H3C S6812-48X6C
                Type: 255
                Length: 17
                Product-ID: H3C S6812-48X6C
        AVP: t=Vendor-Specific(26) l=12 vnd=H3C(25506)
            Type: 26
            Length: 12
            Vendor ID: H3C (25506)
            VSA: t=NAS-Startup-Timestamp(59) l=6 val=1609459214
                Type: 59
                Length: 6
                NAS-Startup-Timestamp: 1609459214

RADIUS Protocol
    Code: Access-Accept (2)
    Packet identifier: 0x53 (83)
    Length: 20
    Authenticator: aecb2072245637d04676171870209a93
    [This is a response to a request in frame 797]
    [Time from request: 0.005399897 seconds]

                                                            Alex

娶你苟命 <qunigouming@gmail.com> 于2023年12月6日周三 11:00写道：
...
Hi,everyone！
*   I'm having trouble with freeradius and don't know if I should ask
"freeradius-users@lists.freeradius.org
<freeradius-users@lists.freeradius.org>"? If this has caused any
inconvenience to anyone, please accept my apology and please ignore this
email.*
*   The following is the debugging process tee debugfile I provide for
freeradius sever to execute radiusd -X 2>&1 | (this includes valid
authentication and invalid authentication processes, I will put them at the
end of the email):*
FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/sql
including configuration file
/etc/raddb/mods-config/sql/main/mysql/queries.conf
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
        libdir = "/usr/lib64/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client all_client {
        ipaddr = 0.0.0.0/0
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
        filename = "/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/var/log/radius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/radius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/raddb/mods-enabled/sql
  sql {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = 3306
        login = "dbuser"
        password = <<< secret >>>
        radius_db = "radiusdb"
        read_groups = yes
        read_profiles = yes
        read_clients = no
        delete_stale_sessions = yes
        sql_user_name = "%{User-Name}"
        default_user_profile = ""
        client_query = "SELECT id, nasname, shortname, type, secret,
server FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op
FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op
FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY i
d"
        authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY i
d"
        group_membership_query = "SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority"
        simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
        simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid, framedproto
col FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS
NULL"
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
        query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   =
'%{integer:Event-Timestamp}' -
 UNIX_TIMESTAMP(acctstarttime), acctterminatecause =
'%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND
nasipaddress   = '%
{NAS-IP-Address}' AND acctstarttime <=
FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     accounting-off {
        query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   =
'%{integer:Event-Timestamp}' -
 UNIX_TIMESTAMP(acctstarttime), acctterminatecause =
'%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND
nasipaddress   = '%
{NAS-IP-Address}' AND acctstarttime <=
FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     start {
        query = "INSERT INTO radacct (acctsessionid,
 acctuniqueid,           username, realm,
 nasipaddress,
        nasportid, nasporttype,         acctstarttime,
 acctupdatetime, acctstoptime,           acctsessiontime,
 acctauthentic, c
onnectinfo_start,       connectinfo_stop,       acctinputoctets,
acctoutputoctets,      calledstationid,        callingstationid,
acctterminatec
ause,   servicetype,            framedprotocol, framedipaddress) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
'%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}),
FROM_UNIXTIME(
%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '
', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
     }
     interim-update {
        query = "UPDATE radacct SET acctupdatetime  =
(@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
FROM_UNIXTIME(%{integer:Event-Tim
estamp}), acctinterval    = %{integer:Event-Timestamp} -
UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress =
'%{Framed-IP-Address}', acctsess
iontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctet
s = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}'
WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
     stop {
        query = "UPDATE radacct SET acctstoptime        =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    =
%{%{Acct-Session-Time}
:-NULL}, acctinputoctets        = '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Giga
words}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE Ac
ctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
        reference = ".query"
        query = "INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
 '%{reply:Packet-Type}', '%S')"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
linked
Creating attribute SQL-Group
  instantiate {
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay"    found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec"       found in filter list for realm
"DEFAULT"
.
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/etc/raddb/certs/server.pem"
        certificate_file = "/etc/raddb/certs/server.pem"
        ca_file = "/etc/raddb/certs/ca.pem"
        private_key_password = <<< secret >>>
        dh_file = "/etc/raddb/certs/dh"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        ecdh_curve = "prime256v1"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file
/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 10.1.48-MariaDB
   mysql {
    tls {
    }
        warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radiusdb"
rlm_sql (sql): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 11.2.2-MariaDB-log, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 11.2.2-MariaDB-log, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 11.2.2-MariaDB-log, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 11.2.2-MariaDB-log, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 11.2.2-MariaDB-log, protocol version 10
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:330
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 34346
Listening on proxy address :: port 45544
Ready to process requests
*The following will be the debugging information of the certification
process of the switch：*
(0) Received Access-Request Id 228 from 192.168.1.243:38272 to
192.168.2.118:1812 length 215
(0)   User-Name = "netnoc"
(0)   NAS-Identifier = "4F-37U-S6812"
(0)   Acct-Session-Id = "0000000106121519040000000108000026168"
(0)   User-Password = "123456"
(0)   Calling-Station-Id = "192.168.2.1"
(0)   NAS-Port-Type = Virtual
(0)   Attr-26.25506.230 = 0x4d2d4769676162697445746865726e6574302f302f30
(0)   Framed-IP-Address = 192.168.2.1
(0)   Service-Type = Login-User
(0)   NAS-IP-Address = 192.168.1.243
(0)   H3C-Product-ID = "H3C S6812-48X6C"
(0)   H3C-NAS-Startup-Timestamp = 1609459214
(0) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "netnoc", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     [files] = noop
(0) sql: EXPAND %{User-Name}
(0) sql:    --> netnoc
(0) sql: SQL-User-Name set to 'netnoc'
rlm_sql (sql): Reserved connection (0)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'netnoc' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'netnoc' ORDER BY id
(0) sql: User found in radcheck table
(0) sql: Conditional check items matched, merging assignment check items
(0) sql:   MD5-Password :=
0x6466346638383237653136313136306566383961303439343861363962323139
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'netnoc' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'netnoc' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(0) sql:    --> SELECT groupname FROM radusergroup WHERE username =
'netnoc' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'netnoc' ORDER BY priority
(0) sql: User not found in any groups
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 11.2.2-MariaDB-log, protocol version 10
(0)     [sql] = ok
(0)     [expiration] = noop
(0)     [logintime] = noop
(0) pap: Normalizing MD5-Password from hex encoding, 32 bytes -> 16 bytes
(0)     [pap] = updated
(0)   } # authorize = updated
(0) Found Auth-Type = PAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Auth-Type PAP {
(0) pap: Login attempt with password
(0) pap: Comparing with "known-good" MD5-Password
(0) pap: User authenticated successfully
(0)     [pap] = ok
(0)   } # Auth-Type PAP = ok
(0) # Executing section post-auth from file
/etc/raddb/sites-enabled/default
(0)   post-auth {
(0)     update {
(0)       No attributes updated
(0)     } # update = noop
(0) sql: EXPAND .query
(0) sql:    --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND %{User-Name}
(0) sql:    --> netnoc
(0) sql: SQL-User-Name set to 'netnoc'
(0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(0) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'netnoc', '123456', 'Access-Accept', '2023-12-05 10:
07:15.051206')
(0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'netnoc', '123456', 'Access-Accept', '2023
-12-05 10:07:15.051206')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (1)
(0)     [sql] = ok
(0)     [exec] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # post-auth = ok
(0) Sent Access-Accept Id 228 from 192.168.2.118:1812 to
192.168.1.243:38272 length 0
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 228 with timestamp +5
Ready to process requests
(1) Received Access-Request Id 175 from 192.168.1.244:63378 to
192.168.2.118:1812 length 170
(1)   User-Name = "netnoc"
(1)   User-Password = "123456"
(1)   Service-Type = Administrative-User
(1)   Framed-Protocol = X.75-Synchronous
(1)   Framed-IP-Address = 192.168.2.1
(1)   NAS-Identifier = "4F-CE6857-ASW244"
(1)   NAS-Port-Type = Virtual
(1)   NAS-IP-Address = 192.168.1.244
(1)   Huawei-Startup-Stamp = 1701770673
(1)   Huawei-Version = "Huawei VRP Software Version"
(1)   Huawei-Product-ID = "VRP"
(1)   Message-Authenticator = 0x83f55529c0423e10fb1e141aa00a5fff
(1) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "netnoc", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: No EAP-Message, not doing EAP
(1)     [eap] = noop
(1)     [files] = noop
(1) sql: EXPAND %{User-Name}
(1) sql:    --> netnoc
(1) sql: SQL-User-Name set to 'netnoc'
rlm_sql (sql): Reserved connection (2)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'netnoc' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'netnoc' ORDER BY id
(1) sql: User found in radcheck table
(1) sql: Conditional check items matched, merging assignment check items
(1) sql:   MD5-Password :=
0x6466346638383237653136313136306566383961303439343861363962323139
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'netnoc' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'netnoc' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(1) sql:    --> SELECT groupname FROM radusergroup WHERE username =
'netnoc' ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'netnoc' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (2)
Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 11.2.2-MariaDB-log, protocol version 10
(1)     [sql] = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: Normalizing MD5-Password from hex encoding, 32 bytes -> 16 bytes
(1)     [pap] = updated
(1)   } # authorize = updated
(1) Found Auth-Type = PAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   Auth-Type PAP {
(1) pap: Login attempt with password
(1) pap: Comparing with "known-good" MD5-Password
(1) pap: User authenticated successfully
(1)     [pap] = ok
(1)   } # Auth-Type PAP = ok
(1) # Executing section post-auth from file
/etc/raddb/sites-enabled/default
(1)   post-auth {
(1)     update {
(1)       No attributes updated
(1)     } # update = noop
(1) sql: EXPAND .query
(1) sql:    --> .query
(1) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (3)
(1) sql: EXPAND %{User-Name}
(1) sql:    --> netnoc
(1) sql: SQL-User-Name set to 'netnoc'
(1) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(1) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'netnoc', '123456', 'Access-Accept', '2023-12-05 10:
07:21.420568')
(1) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'netnoc', '123456', 'Access-Accept', '2023
-12-05 10:07:21.420568')
(1) sql: SQL query returned: success
(1) sql: 1 record(s) updated
rlm_sql (sql): Released connection (3)
(1)     [sql] = ok
(1)     [exec] = noop
(1)     policy remove_reply_message_if_eap {
(1)       if (&reply:EAP-Message && &reply:Reply-Message) {
(1)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(1)       else {
(1)         [noop] = noop
(1)       } # else = noop
(1)     } # policy remove_reply_message_if_eap = noop
(1)   } # post-auth = ok
(1) Sent Access-Accept Id 175 from 192.168.2.118:1812 to
192.168.1.244:63378 length 0
(1) Finished request
Waking up in 4.9 seconds
*What is puzzling is that the user "netnoc" exists on my mysql, but
when using H3C network supplier products, it will prompt that the user does
not exist. I have repeatedly confirmed that there is no problem with the
switch configuration file. This problem will not exist when testing with
Cisco ACS.*
*The following is the mysql account information：*
MariaDB [radiusdb]> SELECT * FROM radcheck;
+----+----------+--------------------+----+----------------------------------+
| id | username | attribute          | op | value
   |
+----+----------+--------------------+----+----------------------------------+
|  1 | netnoc  | MD5-Password       | := | df4f8827e161sdfg56a04948a69b219
|
*The following is my network configuration file using H3C S6812-48X6C. I
tried to use both freeradius and system domains but failed, which is very
frustrating.*
local-user usermgmt
service-type ssh terminal
authorization-attribute level 3
password cipher sjkak25u98sdk
quit
ssh server enable
ssh user usermgmt service-type all authentication-type password
dot1x
dot1x authentication-method pap
domain default enable freeradius(system)
radius scheme freeradius
 primary authentication 192.168.2.118 key simple demo_radius_secret
 user-name-format without-domain
quit
radius scheme system
 user-name-format without-domain
quit
domain freeradius
 authentication login radius-scheme freeradius local
quit
domain system
 authentication login radius-scheme freeradius local
quit
user-interface vty 0 4
 acl 2000 inbound
 authentication-mode scheme
 protocol inbound ssh
* I don’t know if providing the above information will be helpful or
troublesome to you. If so, I'm so sorry! I look forward to having you reply
to my email again if I need to provide more information. At the same time,
I also look forward to your help me solve this problem! Thanks everyone!*
*
alex007*